Ozone Metal Furniture Lock OZFL-33 RF Instruction Manual

Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of your Ozone Metal Furniture Lock, Model OZFL-33 RF. This electronic lock is designed to enhance the security of wooden cabinets and drawers using RFID card access technology.

Image Description: A front view of the Ozone Metal Furniture Lock, Model OZFL-33 RF. It features a sleek black and silver design with the "OZONE" logo at the top and an RFID card reader area marked "Card Here" with signal wave icons.

Safety Information

• Read all instructions carefully before installation and use.
• Do not expose the lock to extreme temperatures or moisture.
• Use only specified power sources or batteries.
• Keep RFID cards away from strong magnetic fields to prevent damage.
• Ensure proper installation to prevent accidental injury or damage to furniture.

Package Contents

The standard package for the Ozone Metal Furniture Lock OZFL-33 RF typically includes:

• Ozone Metal Furniture Lock Unit
• RFID Cards (quantity may vary)
• Installation Hardware (screws, mounting plates)
• User Manual (this document)

Specifications

Image Description: An illustration detailing the features of the Ozone Metal Furniture Lock. It highlights Access Modes (RFID Card), Alarms (Low Battery Indicator), Smart Features (USB for Battery Backup, Automatic Locking), Door Thickness (5-25mm), and Finish (Black).

Setup and Installation

The Ozone Metal Furniture Lock OZFL-33 RF is designed for easy installation on wooden cabinets and drawers.

1. Prepare the Surface: Ensure the installation surface on your wooden cabinet or drawer is clean, dry, and flat.
2. Position the Lock: Determine the optimal placement for the lock unit. It should be accessible for RFID card scanning and allow for proper locking mechanism engagement.
3. Mark Drilling Points: Use the provided template (if included) or measure carefully to mark the drilling points for the lock unit and strike plate.
4. Drill Holes: Carefully drill pilot holes at the marked points. Ensure the drill bit size is appropriate for the screws.
5. Mount the Lock Unit: Secure the main lock unit to the inside of the cabinet or drawer using the provided screws.
6. Install the Strike Plate: Mount the strike plate on the corresponding surface (door frame or cabinet body) so that it aligns perfectly with the lock's bolt when closed.
7. Test Functionality: Before closing the cabinet/drawer, manually test the locking mechanism to ensure smooth operation.

Image Description: The Ozone Metal Furniture Lock OZFL-33 RF installed on a light-colored wooden cabinet, demonstrating its intended application for securing wooden furniture.

Operating Instructions

Unlocking with RFID Card

To unlock the furniture lock:

1. Present a registered RFID card to the designated card reading area on the lock unit.
2. The lock will emit an audible signal (e.g., a beep) and/or a visual indicator (e.g., a green light) to confirm successful card reading.
3. The lock will disengage, allowing you to open the cabinet or drawer.

Automatic Locking Function

The OZFL-33 RF features an automatic locking function. After the cabinet or drawer is closed, the lock will automatically engage after a short delay (typically a few seconds) without requiring card presentation.

RFID Card Programming

This section details how to register and manage RFID cards for your lock. The lock can register up to 30 RFID cards.

Registering New RFID Cards

1. Enter Programming Mode: Locate the programming button (often inside the lock unit or battery compartment). Press and hold this button until the lock indicates programming mode (e.g., a specific light pattern or sound).
2. Present Master Card (if applicable): If your lock uses a master card, present it first to authorize programming.
3. Present New Card: Present the new RFID card you wish to register to the card reading area. The lock will confirm successful registration (e.g., a beep).
4. Register Additional Cards: Repeat step 3 for any other cards you wish to register.
5. Exit Programming Mode: Press the programming button again or wait for the lock to automatically exit programming mode.

Deleting RFID Cards

Consult the specific instructions provided with your lock for deleting individual cards or resetting the lock to factory defaults, which typically clears all registered cards. This process often involves entering programming mode and following specific sequences.

Maintenance

Battery Replacement

The lock features a low battery indicator. When the battery is low, replace it promptly to ensure continuous operation.

1. Locate the battery compartment (usually on the inside of the lock unit).
2. Open the compartment and remove the old batteries.
3. Insert new batteries, ensuring correct polarity.
4. Close the battery compartment securely.

USB for Battery Backup

In case of complete battery depletion, the lock may feature a USB port for temporary power supply, allowing you to unlock it and replace the batteries. Connect a standard USB power source to this port to activate the lock.

Cleaning

Clean the lock's exterior with a soft, dry cloth. Avoid using abrasive cleaners or solvents, which can damage the finish.

Troubleshooting

• Lock does not respond to RFID card:
  • Ensure the RFID card is registered.
  • Check battery level; replace if low.
  • Ensure the card is presented correctly to the reading area.
• Lock does not engage automatically:
  • Verify that the cabinet/drawer is fully closed and aligned with the strike plate.
  • Check for any obstructions preventing the bolt from extending.
• Low battery indicator is on:
  • Replace batteries immediately.
  • If locked out due to dead batteries, use the USB battery backup feature (if available).
• Difficulty in installation:
  • Re-read the installation instructions carefully.
  • Ensure correct measurements and alignment.
  • Contact customer support if issues persist.

Warranty and Support

Warranty Information

The Ozone Metal Furniture Lock OZFL-33 RF comes with a 24-month warranty provided by the manufacturer from the date of purchase. Please retain your proof of purchase for warranty claims. The warranty covers manufacturing defects under normal use.

Customer Support

For technical assistance, troubleshooting, or warranty inquiries, please contact Ozone customer support. Refer to the product packaging or the official Ozone website for the most current contact information.

You can visit the official Ozone store for more information: Ozone Store on Amazon