Introduction
The Scalextric C4182 Mustang GT4 is a highly detailed 1:32 scale slot car model. This model accurately replicates the Mustang GT4 that competed in the British GT championship, featuring the distinctive livery of the New Performance RACE team with drivers Aron Taylor-Smith and Sam Smelt. Designed for enthusiasts and collectors, this slot car is compatible with standard Scalextric tracks and systems, including ARC AIR and Spark Plug.
Figure 1: Side view of the Scalextric C4182 Mustang GT4 slot car, showcasing its detailed racing livery.
Safety Information
WARNING: Not suitable for children under 36 months due to small parts that may present a choking hazard.
Always supervise young children during play. Ensure all track connections are secure and power is off before handling the car or track components. Keep the product away from water and extreme temperatures.
What's in the Box
- 1 x Scalextric C4182 Mustang GT4 Slot Car
Please inspect the contents upon opening to ensure all components are present and undamaged.
Setup
- Track Assembly: Ensure your Scalextric track is correctly assembled and all connections are firm. Refer to your Scalextric track system manual for detailed assembly instructions.
- Power Connection: Connect the power supply to the track power base as per your track system's instructions. Ensure the power is switched off before placing cars on the track.
- Placing the Car on the Track: Carefully align the guide blade of the C4182 Mustang GT4 into the slot of the track. Ensure both braids beneath the guide blade make good contact with the metal rails of the track.
- Controller Connection: Connect your hand controllers to the power base.
Figure 2: The C4182 Mustang GT4 positioned correctly on a Scalextric track, ready for operation.
Operating Instructions
- Power On: Once the car is correctly placed on the track and controllers are connected, switch on the power supply to the track.
- Driving: Use the hand controller to regulate the speed of the car. Press the trigger to accelerate and release to slow down. Practice gentle acceleration and braking to maintain control, especially through corners.
- Features: The C4182 Mustang GT4 features working lights for enhanced realism during operation. It also incorporates Magnatraction technology for improved grip and stability on the track.
- Digital Compatibility: This model is equipped with a digital plug, allowing for easy conversion to digital racing systems (e.g., Scalextric Digital) with the appropriate digital chip (sold separately).
Figure 3: The C4182 Mustang GT4 navigating a turn on the track, demonstrating its dynamic capabilities.
Maintenance
Regular maintenance ensures optimal performance and longevity of your Scalextric C4182 Mustang GT4.
- Guide Blade: Periodically check the guide blade for wear. The C4182 features an easy change guide blade, allowing for quick replacement if necessary. Ensure the guide blade is clean and free of debris.
- Braids: The copper braids beneath the guide blade can become worn or frayed. Ensure they are clean, flat, and make good contact with the track rails. Replace them if they show significant wear.
- Tires: Keep the tires clean and free of dust or hair. Gently wipe them with a lint-free cloth. For improved grip, some users may lightly sand the rear tires or replace them with silicone tires (not included).
- Axles and Gears: Occasionally, check that the axles spin freely and the gears are clean and lubricated. Use a small amount of specialist slot car lubricant if needed, avoiding over-lubrication.
- Body Cleaning: Use a soft, dry cloth to wipe the car body. Avoid using harsh chemicals or abrasive materials that could damage the paintwork.
Figure 4: Close-up side view of the C4182 Mustang GT4, illustrating the detail of the wheels and the area where the guide blade and braids are located.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Car does not move | No power to track; poor contact between car and track; motor fault; loose wiring. | Check power supply and track connections. Ensure braids are flat and making good contact. Inspect guide blade. Check for loose wires inside the car. |
| Car moves erratically or slows down | Dirty braids or track rails; worn tires; debris in gears; guide blade issues. | Clean braids and track rails. Clean or replace tires. Check for debris around axles and gears. Ensure guide blade is not bent or damaged. |
| Lights not working | Loose connection; damaged LED; power issue. | Check internal wiring connections to the lights. If the car runs but lights don't, an LED may be faulty. |
| Car deslots frequently | Excessive speed; worn tires; dirty track; guide blade not fully seated; track uneven. | Reduce speed, especially in corners. Clean or replace tires. Ensure track is clean and flat. Check guide blade for proper seating. |
Specifications
- Model Number: C4182
- Brand: Scalextric
- Scale: 1:32 (Large)
- Product Dimensions (LxWxH): 25.4 x 15.24 x 10.16 cm
- Item Weight: 160 g
- Manufacturer Recommended Age: 5 years and up
- Features: Work lights, Digital Plug Ready, Easy Change Guide Blade, Magnatraction
- Compatibility: Scalextric ARC AIR, Scalextric Spark Plug
- Included Components: 1 x Slot Car
Warranty and Support
For information regarding product warranty, please refer to the documentation provided at the point of purchase or contact your retailer. For technical support or further assistance, please visit the official Scalextric website or contact their customer service department.
Official Scalextric Website: www.scalextric.com
