Naxa NDS-1517 Portable Bluetooth Party Speaker User Manual

Introduction

Thank you for purchasing the Naxa NDS-1517 Portable Bluetooth Party Speaker. This manual provides important information regarding the setup, operation, and maintenance of your new speaker. Please read it thoroughly before use and retain it for future reference.

Image: Front view of the Naxa NDS-1517 Portable Bluetooth Party Speaker, showcasing its large 15-inch speaker and integrated disco light behind the grille.

Important Safety Information

• Do not expose the unit to extreme temperatures, humidity, or direct sunlight.
• Do not block ventilation openings.
• Use only attachments/accessories specified by the manufacturer.
• Unplug the unit during lightning storms or when unused for long periods.
• Refer all servicing to qualified service personnel.
• Keep away from water and liquids.

Package Contents

Please ensure all items are present in the package:

• Naxa NDS-1517 Portable Bluetooth Party Speaker
• Wired Microphone
• Remote Control
• Power Adapter / Charging Cable
• User Manual (this document)

Product Overview: Controls and Ports

Familiarize yourself with the various controls and connection ports on your NDS-1517 speaker:

Image: Rear control panel of the Naxa NDS-1517, showing all inputs, outputs, and control knobs.

1. MIC INPUT: Connect a wired microphone.
2. MIC VOLUME KNOB: Adjust the microphone's volume level.
3. ECHO KNOB: Adjust the echo effect for the microphone.
4. TF CARD SLOT: Insert a TF (microSD) card for audio playback.
5. ▶▶I / REC: Short press to play/pause. Long press to record microphone input to USB/TF.
6. ◀◀ / REC: Short press for previous track. Long press to record microphone input to USB/TF.
7. ▶▶ / TWS: Short press for next track. Long press to activate TWS pairing mode.
8. Mode / LED: Press to switch between input modes (Bluetooth, USB, TF, AUX, FM). Long press to toggle disco light.
9. USB PORT: Insert a USB flash drive for audio playback.
10. AUX INPUT: Connect external audio devices via a 3.5mm audio cable.
11. Volume / Power: Rotary knob to adjust master volume and power the unit ON/OFF.
12. Charge: Charging indicator light.
13. DC 5V POWER: Power input port for charging the speaker.

Setup Guide

Charging the Speaker

1. Connect the provided power adapter to the DC 5V POWER port on the rear panel of the speaker.
2. Plug the adapter into a standard wall outlet.
3. The Charge indicator light will illuminate during charging. It will turn off or change color when fully charged.
4. Allow approximately 4-6 hours for a full charge before first use.

Powering On/Off

• To power on the speaker, rotate the Volume / Power knob clockwise until you hear a click and the display illuminates.
• To power off the speaker, rotate the Volume / Power knob counter-clockwise until you hear a click and the display turns off.

Operating Instructions

Bluetooth Pairing

1. Power on the speaker. It will automatically enter Bluetooth pairing mode, indicated by a flashing "BLUE" on the LED display and an audible prompt.
2. Enable Bluetooth on your mobile device (smartphone, tablet, etc.).
3. Search for "NAXA NDS-1517" in the list of available Bluetooth devices.
4. Select "NAXA NDS-1517" to connect. Once paired, the speaker will provide an audible confirmation.
5. You can now stream audio wirelessly from your device to the speaker.

True Wireless Stereo (TWS) Function

The TWS function allows you to connect two NDS-1517 speakers wirelessly for a true stereo sound experience.

1. Ensure both NDS-1517 speakers are powered on and in Bluetooth mode, but NOT connected to any Bluetooth device.
2. On one of the speakers, long press the ▶▶ / TWS button. The speaker will emit a sound indicating it's searching for another TWS speaker.
3. The two speakers will automatically pair with each other. Once connected, you will hear a confirmation sound.
4. Now, connect your mobile device to one of the paired speakers via Bluetooth as described in the "Bluetooth Pairing" section. The audio will play in stereo across both speakers.

USB / TF Card Playback

1. Insert a USB flash drive into the USB PORT or a TF (microSD) card into the TF CARD SLOT.
2. The speaker will automatically switch to USB/TF mode and begin playing audio files (MP3, WAV, etc.) from the inserted media. If it doesn't, press the Mode / LED button to select the correct mode.
3. Use the ◀◀ and ▶▶ buttons to navigate between tracks.
4. Press the ▶▶I button to play or pause.

AUX Input

1. Connect one end of a 3.5mm audio cable (not included) to the AUX INPUT port on the speaker.
2. Connect the other end of the cable to the audio output jack of your external device (e.g., MP3 player, laptop).
3. Press the Mode / LED button to switch the speaker to AUX mode.
4. Audio from your external device will now play through the speaker. Control playback from your external device.

Microphone Usage and Recording

1. Connect the included wired microphone to the MIC INPUT port.
2. Adjust the microphone's volume using the MIC VOLUME KNOB.
3. Adjust the echo effect using the ECHO KNOB.
4. To record your microphone input (requires a USB drive or TF card inserted): Long press the ▶▶I / REC or ◀◀ / REC button. The recording will be saved to the USB drive or TF card.

Disco Light Operation

• To turn the disco light ON or OFF, long press the Mode / LED button.
• The disco light will illuminate and pulse with the music.

Maintenance

• Cleaning: Use a soft, dry cloth to clean the exterior of the speaker. Do not use abrasive cleaners or solvents.
• Storage: When not in use for extended periods, store the speaker in a cool, dry place, away from direct sunlight and extreme temperatures.
• Battery Care: To prolong battery life, fully charge the speaker before storing it for long periods and recharge it every 3-6 months.

Troubleshooting

Specifications

Warranty and Support

For warranty information and technical support, please refer to the warranty card included with your product or visit the official Naxa Electronics website. Do not attempt to repair the unit yourself.

Naxa Electronics Official Website: www.naxa.com