VidPro RL-10
Vidpro RL-10 10" LED Ring Light Kit
User Instruction Manual
Introduction
This manual provides detailed instructions for the setup, operation, and maintenance of your Vidpro RL-10 10" LED Ring Light Kit. Please read this manual thoroughly before using the product to ensure proper function and longevity.
The Vidpro RL-10 is designed to provide balanced and evenly diffused lighting, ideal for various applications including portrait photography, fashion modeling, makeup artistry, vlogging, and macro photography. It features adjustable brightness and color temperature settings to suit different lighting needs.
Package Contents
Verify that all items listed below are included in your package:
- 1 x Vidpro RL-10 10" Bi-Color LED Ring Light
- 1 x Mini Tripod
- 1 x Adjustable Ball Head
- Note: A USB power plug is not included and must be supplied by the user.
Figure 1: Vidpro RL-10 LED Ring Light Kit components including the ring light, mini tripod, and USB controller.
Setup Instructions
Attach the Ball Head to the Tripod:
Screw the adjustable ball head onto the top of the mini tripod. Ensure it is securely tightened to prevent wobbling.
Mount the Ring Light:
Attach the Vidpro RL-10 LED Ring Light onto the ball head. The ring light has a standard 1/4-20" socket at its base for mounting. Tighten the locking knob on the ball head to secure the ring light in place.
Position the Tripod:
Extend the legs of the mini tripod to provide a stable base. Place the tripod on a flat, stable surface. The tripod's platform height is 5 inches when fully extended.
Connect Power:
Plug the USB cable from the ring light into a compatible USB power source (e.g., a USB wall adapter, computer USB port, or power bank). The ring light requires a 5V USB power input. The built-in USB cable is 72 inches (6 feet) long.
Attach Accessories (Optional):
If using a camera or smartphone, attach it to the center shoe-mount or 1/4-20" socket located within the ring light. Additional accessories can be mounted on the three outer shoe-mount slots provided on the top and sides of the ring light.
Figure 2: Front and back views of the Vidpro RL-10 LED Ring Light, showing mounting points and cable.
Operating Instructions
The Vidpro RL-10 features an inline digital control for easy adjustments.
Figure 3: Inline controller for the Vidpro RL-10, showing power, brightness, and color mode buttons.
Power On/Off:
Press the Power On/Off button (usually indicated by a power symbol) on the inline controller to turn the ring light on or off.
Adjust Brightness:
Use the Brightness + and Brightness - buttons to increase or decrease the light intensity. There are 10 distinct brightness levels available.
Change Color Temperature:
Press the Color Mode button to cycle through the three available color temperature settings:
- 2800K: Warm light, suitable for cozy or intimate settings.
- 4500K: Neutral white light, balanced for general use.
- 6500K: Cool white light, ideal for bright, crisp illumination.
Figure 4: Visual representation of brightness levels and color temperature options.
Maintenance
- Cleaning: Use a soft, dry cloth to wipe the surface of the ring light and tripod. Do not use abrasive cleaners or solvents, as they may damage the finish or electronic components.
- Storage: When not in use, store the ring light kit in a cool, dry place, away from direct sunlight and excessive humidity.
- Handling: Handle the ring light and its components with care. Avoid dropping the unit or subjecting it to strong impacts.
- Cable Care: Do not bend or crimp the USB cable excessively. Always grasp the plug, not the cable, when disconnecting from a power source.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Ring light does not turn on. | No power supply or loose connection. | Ensure the USB cable is securely plugged into a working USB power source. Try a different USB port or power adapter. |
| Light flickers or is dim. | Insufficient power supply or faulty cable. | Use a USB power source that provides adequate power (e.g., a 5V/2A adapter). Check the USB cable for damage. |
| Cannot change brightness or color temperature. | Controller malfunction or power issue. | Ensure the unit is powered on. Disconnect and reconnect the USB power. If the issue persists, contact customer support. |
| Tripod is unstable. | Legs not fully extended or placed on an uneven surface. | Fully extend the tripod legs and ensure they are locked in place. Place the tripod on a flat, stable surface. |
Specifications
| Feature | Detail |
|---|---|
| Model Number | RL-10 |
| LEDs | 120 High intensity (10W) |
| Output | 2500 Lumens |
| Power Input | USB 5V |
| Ring Diameter | 10 inches |
| USB Cable Length | 72 inches (6 feet) |
| Tripod Folded Length | 7.5 inches |
| Tripod Platform Height | 5 inches |
| Unit Weight | 15 oz (0.94 lbs) |
| Product Dimensions (Overall) | 11.1 x 10.7 x 1.7 inches |
| Connectivity | USB |
Warranty Information
The Vidpro RL-10 10" LED Ring Light Kit comes with a Vidpro 1 Year Limited Warranty. This warranty covers defects in materials and workmanship under normal use for a period of one year from the original date of purchase.
For warranty claims or detailed information regarding the terms and conditions of your warranty, please refer to the official Vidpro website or contact Vidpro customer support directly.
Customer Support
If you encounter any issues or have questions regarding your Vidpro RL-10 LED Ring Light Kit that are not addressed in this manual, please contact Vidpro customer support for assistance.
For the most up-to-date contact information, please visit the official Vidpro website: VidPro Store on Amazon
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.