EGLO Lindell 1-Light Pendant Fixture Instruction Manual

1. Product Overview

The EGLO Lindell pendant fixture features a modern design with cage-like wires that showcase a bare bulb, ideal for an Edison-style bulb. Its matte black finish allows for versatile integration with various interior themes, including modern, farmhouse, and industrial styles. This fixture is designed for indoor use in areas such as kitchens, hallways, and dining rooms.

Key Features:

• Requires one A19 100-Watt bulb (not included).
• Constructed from durable steel for long-lasting performance.
• Features an adjustable hanging height, up to 72 inches.
• Compatible with standard wall dimmers (dimmer not included).
• Designed to be compatible with LED bulbs.

Figure 1.1: EGLO Lindell 1-Light Pendant Fixture with geometric cage design.

Figure 1.2: Multiple EGLO Lindell pendant fixtures illuminating a modern kitchen island.

Figure 1.3: An EGLO Lindell pendant fixture providing ambient light in a dining area.

2. Setup and Installation

Important: Before beginning installation, ensure the power supply to the installation area is turned off at the circuit breaker. It is recommended to have installation performed by a qualified electrician.

2.1 Unpacking and Inspection

1. Carefully remove all components from the packaging.
2. Inspect all parts for any damage. Do not proceed with installation if any parts are damaged.
3. Verify that all included components (mounting hardware) are present.

2.2 Mounting the Fixture

1. Attach the mounting bracket to the junction box in the ceiling using the provided screws.
2. Adjust the hanging length of the pendant cord to your desired height. The cord is adjustable up to 72 inches.
3. Connect the fixture's electrical wires to the corresponding household wires (black to black, white to white, ground to ground) using wire nuts.
4. Carefully tuck the wires into the junction box and secure the canopy to the mounting bracket with the provided screws.

Figure 2.1: Diagram showing product dimensions, bulb type (1 x 100W E26/Medium), and indoor use suitability. The fixture is sloped ceiling adaptable.

2.3 Installing the Bulb

1. Screw one A19 E26 Medium base bulb (max 100W, not included) into the fixture's socket.
2. Restore power at the circuit breaker.
3. Test the fixture by turning on the light switch.

3. Operation

The EGLO Lindell pendant fixture operates via a standard wall switch. If connected to a compatible wall dimmer (not included), the light intensity can be adjusted.

• Turning On/Off: Use the wall switch connected to the fixture.
• Dimming: If a compatible dimmer switch is installed, rotate or slide the dimmer control to adjust the light output. Ensure the installed bulb is dimmable.

4. Maintenance

Regular maintenance ensures the longevity and optimal performance of your pendant fixture.

4.1 Cleaning

• Before cleaning: Always turn off the power supply to the fixture at the circuit breaker.
• Wipe the fixture with a soft, dry cloth.
• Do not use abrasive cleaners, solvents, or polishes as they may damage the finish.

4.2 Bulb Replacement

• Before replacing: Turn off the power supply to the fixture at the circuit breaker and allow the bulb to cool completely.
• Unscrew the old bulb from the socket.
• Screw in a new A19 E26 Medium base bulb (max 100W). Ensure the new bulb is compatible with any dimmer switch if one is installed.
• Restore power at the circuit breaker.

5. Troubleshooting

If you experience issues with your EGLO Lindell pendant fixture, refer to the following common problems and solutions:

6. Specifications

7. Warranty & Support

The EGLO Lindell pendant fixture comes with a 1-year limited warranty from the date of purchase, covering defects in materials and workmanship.

For technical support, warranty claims, or replacement parts, please contact EGLO customer service. Refer to the official EGLO website or your purchase documentation for contact information.