1. Introduction
Thank you for choosing the EUGAD Bathroom Mirror Cabinet. This manual provides essential information for the safe and efficient use of your new mirror cabinet. Please read these instructions carefully before installation and operation, and retain them for future reference.
1.1 Safety Information
- Ensure the power supply is disconnected before installation or maintenance.
- Installation should be performed by a qualified professional if you are unsure.
- Do not expose the product to excessive moisture or direct water spray beyond its IP44 rating.
- Avoid using abrasive cleaners or sharp objects on the mirror surface or cabinet.
- Keep children away from the product during installation and ensure they do not tamper with electrical components.
- The cabinet is designed for indoor use only.
2. Package Contents
Please verify that all components are present and undamaged before beginning assembly.
- Pre-assembled Mirror Cabinet Body
- Adjustable Tempered Glass Shelves (2 pieces)
- Mounting Hardware (screws, wall plugs)
- Instruction Manual
Figure 2.1: EUGAD Bathroom Mirror Cabinet with integrated LED lighting.
3. Specifications
| Feature | Detail |
|---|---|
| Brand | EUGAD |
| Model Number | EUGAD (60x20x60cm White) |
| Dimensions (W x D x H) | 60 x 20 x 60 cm |
| Weight | 13.5 kg |
| Material | High-quality Stainless Steel Frame, Tempered Glass Shelves, Copper-free IP44 Mirror with Explosion-proof Film |
| Lighting | LED, Adjustable Brightness (10-100%), Adjustable Color Temperature (2700-6500K, 3 colors: cool white, natural white, warm white) |
| Special Features | Anti-fog function, Memory function for light settings, Integrated Shaver Socket with Cap, Soft-close hinges, Auto-off (1 hour) |
| Max Load Capacity | 10 kg |
4. Setup & Installation
The cabinet body is pre-assembled. Follow these steps for wall mounting and shelf installation.
4.1 Wall Mounting
- Choose Location: Select a suitable wall in your bathroom, ensuring it can support the cabinet's weight (13.5 kg empty, plus contents). Avoid areas with hidden pipes or electrical wires.
- Mark Drilling Points: Hold the cabinet against the wall at the desired height and use a pencil to mark the drilling points for the mounting screws. Ensure the marks are level.
- Drill Holes: Use an appropriate drill bit for your wall type (e.g., masonry bit for concrete/brick) and drill holes at the marked points.
- Insert Wall Plugs: Insert the provided wall plugs into the drilled holes.
- Secure Screws: Drive the mounting screws into the wall plugs, leaving a small portion exposed for the cabinet to hang on.
- Hang Cabinet: Carefully lift the cabinet and align its mounting points with the exposed screws. Lower the cabinet onto the screws, ensuring it is securely seated.
- Final Tightening: Once the cabinet is hanging, tighten the screws from inside the cabinet to secure it firmly to the wall.
Figure 4.1: Key structural and functional components of the cabinet, including mounting points and power cable.
4.2 Shelf Installation
- Open Cabinet Door: Open the mirror cabinet door to access the interior.
- Insert Shelf Supports: Locate the pre-drilled holes on the interior sides of the cabinet. Insert the shelf support pins into the desired height holes. There are 6 pre-drilled heights available for customization.
- Place Glass Shelves: Carefully place the tempered glass shelves onto the installed support pins. Ensure they are stable and level.
Figure 4.2: The interior of the cabinet with adjustable glass shelves for versatile storage.
4.3 Electrical Connection
The mirror cabinet requires a direct electrical connection for its lighting and shaver socket features. It is recommended that this connection be performed by a certified electrician to ensure compliance with local electrical codes and safety standards.
- Connect the cabinet's power cable to a suitable power source in your bathroom.
- Ensure all connections are secure and insulated.
5. Operating Instructions
5.1 Light Control (Touch Switches)
The intelligent mirror features touch-sensitive controls located on the mirror surface.
- Power On/Off: Tap the power icon to turn the LED light on or off.
- Adjust Brightness: Press and hold the brightness icon to cycle through brightness levels from 10% to 100%. Release when the desired brightness is reached.
- Change Light Color: Tap the color temperature icon to switch between three light colors:
- Cool White (approx. 6500K)
- Natural White (approx. 4000K)
- Warm White (approx. 2700K)
- Memory Function: The mirror will remember your last brightness and color temperature settings even after a power interruption.
- Auto-Off: For energy saving, the light will automatically turn off if there is no operation for 1 hour.
Figure 5.1: Intelligent touch controls for light color and brightness adjustment.
5.2 Anti-Fog Function
The mirror is equipped with an anti-fog heating function to ensure clear visibility, especially after showering.
- Activate Anti-Fog: Tap the anti-fog icon on the mirror surface to activate the defogging function.
- Deactivate Anti-Fog: Tap the anti-fog icon again to turn off the function.
Figure 5.2: The anti-fog function ensures a clear mirror surface.
5.3 Shaver Socket
An integrated shaver socket with a protective cap is located inside the cabinet for convenient and safe charging of electric shavers and toothbrushes.
- Access Socket: Open the cabinet door to access the shaver socket.
- Use: Lift the protective cap and plug in your device. Ensure the cap is closed when not in use to protect against moisture.
Figure 5.3: The shaver socket is suitable for various plug types.
6. Maintenance & Care
Proper care will extend the life and maintain the appearance of your mirror cabinet.
- Cleaning the Mirror: Use a soft, lint-free cloth and a non-abrasive glass cleaner. Spray the cleaner onto the cloth, not directly onto the mirror, to prevent liquid from seeping into the edges.
- Cleaning the Cabinet: Wipe the stainless steel frame and interior surfaces with a soft, damp cloth. For stubborn marks, use a mild, non-abrasive cleaner. Dry thoroughly.
- Avoid Harsh Chemicals: Do not use ammonia-based cleaners, abrasive powders, or scouring pads, as these can damage the finish and mirror coating.
- Regular Inspection: Periodically check all mounting hardware and electrical connections for tightness and signs of wear.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on. | No power supply; loose electrical connection; faulty LED driver. | Check power outlet and circuit breaker. Ensure electrical connections are secure (consult an electrician). Contact customer support if the issue persists. |
| Anti-fog function not working. | Function not activated; electrical issue. | Ensure the anti-fog icon is tapped. Check power supply. |
| Light brightness/color cannot be adjusted. | Incorrect operation; touch sensor issue. | Refer to Section 5.1 for correct operation. Ensure hands are clean and dry when using touch controls. |
| Shaver socket not providing power. | No power supply; internal wiring issue. | Check main power to the cabinet. Consult an electrician for internal wiring inspection. |
| Cabinet feels unstable after mounting. | Improper installation; loose screws. | Ensure mounting screws are fully tightened. Verify wall plugs are appropriate for your wall type. Re-read Section 4.1. |
8. Warranty & Support
EUGAD products are manufactured to high-quality standards. For warranty information, technical support, or replacement parts, please contact your retailer or visit the official EUGAD website. Please have your purchase receipt and product model information ready when contacting support.
For more information, you may visit the EUGAD store: EUGAD Store on Amazon
