Introduction
The reer Sleeplight 2-in-1 Night Light is designed to provide a comforting and practical light source for your child's room. This versatile device functions both as a plug-in night light and a portable, battery-powered light, offering flexibility and convenience. It features energy-saving LED technology, a twilight sensor for automatic operation, and two brightness levels to suit different needs.
Important Safety Instructions
- Always supervise children when the night light is in use, especially when it is detached from the base.
- Do not immerse the device in water or other liquids.
- Keep the device away from direct heat sources and open flames.
- Only use the night light with appropriate power outlets.
- Do not attempt to open or repair the device yourself. Refer to qualified personnel for service.
- Ensure the night light is placed on a stable surface when used in portable mode.
- For first use, ensure the night light is fully charged as per the setup instructions.
What's in the Box
- reer Sleeplight 2-in-1 Night Light (main unit)
- Integrated Power Plug Base
- Rechargeable Battery (integrated)
Setup
Before first use, the reer Sleeplight requires an initial charge to ensure optimal battery performance.
- Separate the Night Light: Gently pull the night light unit upwards to detach it from the plug base.
- Set the Switch: Locate the small switch on the side of the plug base. Ensure it is set to the "O" (Off) position for initial charging.
- Plug In: Insert the plug base into a suitable wall socket. The night light unit should be placed back onto the plug base for charging.
- Initial Charge: Allow the night light to charge for 8 to 10 hours during its first charge cycle. This ensures the internal battery is fully conditioned. The battery recharges automatically when the unit is plugged into a socket, even during use.
Operation
The reer Sleeplight offers two primary modes of operation: as a stationary plug-in night light and as a portable, battery-powered light.
Plug-in Mode
When the night light unit is attached to the plug base and inserted into a wall socket, it functions as a stationary night light. The integrated twilight sensor automatically turns the light on when the room darkens and off when it becomes bright.
Portable Mode
To use the night light as a portable unit, simply detach it from the plug base. The internal battery allows for cordless operation, making it ideal for guiding children to the bathroom at night or for comforting them in their crib.
Brightness Levels
The reer Sleeplight features two brightness levels. To switch between them, gently tap the top of the night light unit. The light emits a warm, comforting glow suitable for a child's environment.
Care and Maintenance
To ensure the longevity and proper functioning of your reer Sleeplight, follow these care instructions:
- Cleaning: Disconnect the night light from the power outlet before cleaning. Wipe the surface with a soft, dry, or slightly damp cloth. Do not use abrasive cleaners or solvents.
- Storage: When not in use for extended periods, store the night light in a cool, dry place, away from direct sunlight.
- Battery Care: To maintain battery health, avoid completely draining the battery frequently. Recharge the unit regularly, especially if it will be stored for a long time.
For information on recycling and cleaning light bulbs, please refer to general guidelines on lamp maintenance.
Troubleshooting
If you encounter issues with your reer Sleeplight, please refer to the following common problems and solutions:
- Light does not turn on when plugged in:
- Check if the power outlet is functioning correctly.
- Ensure the night light is securely seated on the plug base.
- Verify that the room is dark enough for the twilight sensor to activate.
- Light does not work in portable (battery) mode:
- The battery may be depleted. Reattach the night light to the plug base and charge it for several hours.
- If the battery life is significantly reduced after a few months of use, the battery may be nearing the end of its lifespan. While the battery is designed for longevity, continuous heavy use or frequent deep discharges can affect its capacity over time.
- Light flickers or has intermittent connection:
- Ensure the night light unit is firmly connected to the plug base.
- Check for any visible damage to the plug pins or the night light unit. If damage is present, discontinue use and contact customer support.
- Twilight sensor not working correctly:
- Ensure the sensor area (usually on the front or top of the unit) is not obstructed by furniture or other objects.
- Test the sensor in varying light conditions to confirm its responsiveness.
If these steps do not resolve the issue, please contact reer customer support for further assistance.
Technical Specifications
| Feature | Specification |
|---|---|
| Model Number | 52141 |
| Product Dimensions (L x W x H) | 9.7 x 12 x 6.5 cm |
| Weight | 82 grams |
| Power Source Type | Battery Powered (Rechargeable) |
| Battery Type | 1 Lithium-ion (included) |
| Light Source Type | LED (Diode électroluminescente) |
| Number of Brightness Levels | 2 |
| Special Feature | Rechargeable, Twilight Sensor |
| Recommended Uses | Sleep aid, Reading, Nursery lighting |
| Switch Type | Tactile |
| Color | Cool Grey |
Warranty and Support
reer products are manufactured to high quality standards. For information regarding warranty coverage, please refer to the warranty card included with your purchase or visit the official reer website. If you require technical support, have questions about product functionality, or need assistance with troubleshooting beyond what is provided in this manual, please contact reer customer service directly. Contact details can typically be found on the product packaging or the manufacturer's website.
