Nerf Elite 2.0 Volt SD-1 Blaster Instruction Manual

Product Overview

The Nerf Elite 2.0 Volt SD-1 Blaster is designed for enhanced targeting and customizable play. This compact blaster comes with 6 Official Nerf darts and features a light beam for improved accuracy in low-light conditions. It also includes 2 tactical rails for attaching accessories (sold separately) and built-in storage for 2 darts, ensuring quick reloads during play.

Image: Nerf Elite 2.0 Volt SD-1 Blaster in its retail packaging, showcasing the blaster, darts, and key features.

Components

Your Nerf Elite 2.0 Volt SD-1 Blaster package includes:

• 1 x Nerf Elite 2.0 Volt SD-1 Blaster
• 6 x Official Nerf Darts
• Instruction Manual

Image: The Nerf Elite 2.0 Volt SD-1 Blaster displayed alongside its 6 included Official Nerf Darts.

Setup

Battery Installation (for Light Beam)

The light beam targeting feature requires 2 AAA batteries (not included). To install:

1. Locate the battery compartment on the blaster.
2. Using a Phillips head screwdriver (not included), unscrew the battery compartment cover.
3. Insert 2 AAA batteries, ensuring correct polarity (+/-).
4. Replace the cover and secure it with the screw.

Loading Darts

To load a dart into the blaster:

1. Insert one Official Nerf dart into the barrel at the front of the blaster. Push it in firmly until it is seated properly.
2. For quick reloads, store up to 2 additional darts in the built-in storage slots located in the handle of the blaster.

Image: Front view of the Nerf Elite 2.0 Volt SD-1 Blaster, showing the barrel where darts are loaded.

Operating Instructions

Priming and Firing

1. Ensure a dart is loaded into the barrel.
2. Pull the priming handle at the back of the blaster all the way back until it clicks into place. This primes the blaster for firing.
3. Aim at your target.
4. Press the trigger to fire the dart.

Using the Light Beam Targeting

To activate the light beam for enhanced targeting:

1. Locate the light beam switch on the front underside of the blaster.
2. Slide the switch to the 'ON' position to activate the light beam.
3. The light beam will project a red dot onto your target, assisting with aim up to 15 feet (4.5 meters) away.
4. Slide the switch to the 'OFF' position when not in use to conserve battery life.

Maintenance

• Cleaning: Wipe the blaster with a damp cloth to remove dust and dirt. Do not submerge in water.
• Dart Care: Use only Official Nerf darts. Inspect darts regularly for damage. Damaged darts may affect performance and could cause jams. Do not modify darts.
• Battery Replacement: Replace batteries when the light beam becomes dim or stops working. Always use fresh, new batteries of the specified type.
• Storage: Store the blaster and darts in a cool, dry place away from direct sunlight when not in use.

Troubleshooting

Specifications

• Product Dimensions: 10.5 x 2.25 x 8 inches
• Item Weight: 7.1 ounces
• Model Number: E9952
• Manufacturer Recommended Age: 8 - 8 years
• Batteries Required: 2 AAA batteries (not included)
• Dart Firing Range: Up to 90 feet (27 meters)
• Light Beam Range: Up to 15 feet (4.5 meters)
• Manufacturer: Hasbro

Safety Information

WARNING: To avoid eye injury:

• Do not aim at eyes or face.
• Use of eyewear recommended for players and people within range.
• Use only Official Nerf darts. Other darts may not meet safety standards.
• Do not modify blaster or darts.

Support

For further assistance or inquiries, please contact the manufacturer directly. Refer to the product packaging for contact details.