1. Introduction
The Lian Li LAN2-2X is a side diffused LED strip designed to enhance the aesthetic of your LANCOOL II, LANCOOL 2, or LANCOOL Two computer case. It provides vibrant, diffused lighting to complement your system's build, offering various lighting effects and motherboard synchronization capabilities.
2. Product Features
- Designed specifically for LANCOOL II series cases.
- Provides beautifully diffused LED lighting, eliminating visible hot spots.
- Lighting effects can be controlled through the M (Mode) and C (Color) buttons on the top panel of compatible cases.
- Supports motherboard synchronization by pressing the M button to switch to the 8th mode.
- Compatible with all motherboards equipped with a 5V addressable RGB (ARGB) header.
- Universal RGB LED strip functionality.
3. Package Contents
The package includes:
- 1x Lian Li LAN2-2X Side Diffused LED Strip
4. Specifications
| Specification | Value |
|---|---|
| Model Number | LAN2-2X |
| Dimensions (L x W x H) | 395mm x 4mm x 12mm (16.2 x 2 x 1 inches) |
| Cable Length | 350mm |
| Number of LEDs | 37 |
| Voltage | 5 Volts |
| Item Weight | 3.53 ounces (approx. 100g) |
5. Setup and Installation
Follow these steps to install your Lian Li LAN2-2X LED Strip:
- Prepare your case: Ensure your computer case is powered off and unplugged. Open the side panel of your LANCOOL II series case.
- Identify installation area: The LED strip is designed to fit along the side panel or specific internal channels of your LANCOOL II case. Refer to your case's manual for recommended placement.
- Clean the surface: Before applying the LED strip, ensure the installation surface is clean and dry to ensure proper adhesion.
- Apply the LED strip: Carefully peel off the protective backing from the 3M adhesive on the back of the LED strip. Position the strip firmly onto the desired surface within your case.
Image: Lian Li LAN2-2X LED strip installed inside a computer case.
- Connect to power and control: Locate an available 5V Addressable RGB (ARGB) header on your motherboard or a compatible RGB controller. Connect the LED strip's 3-pin ARGB cable to this header. Ensure the connector is aligned correctly to avoid damage.
- Cable management: Route the cable neatly to prevent interference with other components and to maintain good airflow.
- Close the case: Once installed and connected, close your computer case side panel.
Image: Back of the LED strip with 3M adhesive.
6. Operating Instructions
The Lian Li LAN2-2X LED strip offers flexible control options:
- Case Button Control: If connected to the case's integrated RGB controller, use the 'M' (Mode) and 'C' (Color) buttons on the top panel of your LANCOOL II case to cycle through various lighting effects and colors.
- Motherboard Synchronization: To synchronize the LED strip with your motherboard's RGB software (e.g., ASUS Aura Sync, MSI Mystic Light Sync, Gigabyte RGB Fusion), press the 'M' button on your case until the 8th mode is activated. This mode typically hands over control to the motherboard software, allowing for unified lighting effects across all compatible components.
- Software Control: Once synchronized with your motherboard, use the motherboard's dedicated RGB software to customize colors, patterns, and brightness settings for the LED strip.
7. Maintenance
To ensure the longevity and optimal performance of your LED strip:
- Cleaning: Gently wipe the diffused surface of the LED strip with a soft, dry, lint-free cloth to remove dust. Do not use liquid cleaners or abrasive materials.
- Handling: Avoid excessive bending or twisting of the LED strip, as this can damage the internal components or the adhesive.
- Environment: Ensure the LED strip is installed in a well-ventilated area within your PC case to prevent overheating, although LED strips generally produce minimal heat.
8. Troubleshooting
If you encounter issues with your Lian Li LAN2-2X LED Strip, consider the following:
- LED Strip Not Lighting Up:
- Check if the 3-pin ARGB connector is securely plugged into the motherboard or controller.
- Ensure the 5V ARGB header on your motherboard is enabled in the BIOS/UEFI settings, if applicable.
- Verify that your motherboard's RGB software is running and configured correctly.
- Incorrect Colors or Effects:
- If using case buttons, cycle through modes and colors to ensure the desired effect is selected.
- If using motherboard sync, ensure the LED strip is set to the 8th mode via the case button. Then, adjust settings in your motherboard's RGB software.
- Confirm that the ARGB connector is not plugged into a 12V RGB header, as this can cause damage or incorrect operation.
- Flickering or Dimming:
- Check for loose connections.
- Ensure your power supply is providing stable power to your system.
- Update your motherboard's RGB software to the latest version.
If problems persist, consult the Lian Li official support resources.
9. Warranty and Support
For detailed warranty information, technical assistance, or to contact customer support, please visit the official Lian Li website. Keep your proof of purchase for any warranty claims.
