Lamicall Universal Bicycle/Motorcycle Phone Holder (Model BM02-EU-B)

Introduction

Thank you for choosing the Lamicall Universal Bicycle/Motorcycle Phone Holder. This product is designed to securely mount your smartphone on bicycle or motorcycle handlebars, providing easy access to navigation, music, or calls during your ride. It features a robust design, one-handed operation, shockproof protection, and wide compatibility with various smartphone models.

Package Contents

• Lamicall Phone Holder Unit
• Handlebar Clamp
• Silicone Pads (4 pieces)

Setup and Installation

1. Identify Handlebar Diameter: The holder is compatible with handlebars ranging from 15mm to 30mm in diameter.
2. Select Silicone Pads: Choose the appropriate number of silicone pads to ensure a snug fit around your handlebar. Insert them into the handlebar clamp as needed.
3. Attach Clamp to Handlebar: Open the handlebar clamp and position it on your desired location on the handlebar. Securely tighten the screw until the clamp is firm and does not rotate freely.
4. Mount Phone Holder: Align the phone holder unit with the clamp and slide it into place until it clicks, indicating it is quick-detachable and securely attached.

Operating Instructions

1. Inserting Your Phone: With one hand, gently push your smartphone into the holder. The holder's arms will automatically clamp around your phone, securing it in place.
2. Engaging the Safety Lock: For added security, especially on uneven terrain, locate the switch on the back of the holder and slide it to the locked position. This prevents accidental release of your phone.
3. Removing Your Phone: To remove your phone, first disengage the safety lock (if applied). Then, gently press the release mechanism (if applicable, or simply pull the phone out against the spring tension) to free your device.

Maintenance

To ensure the longevity and optimal performance of your Lamicall phone holder, follow these maintenance guidelines:

• Cleaning: Wipe the holder with a soft, damp cloth to remove dust and dirt. Avoid using harsh chemicals or abrasive cleaners.
• Inspection: Periodically check all screws and connections to ensure they are tight. Inspect the silicone pads for wear and tear.
• Storage: When not in use for extended periods, store the holder in a cool, dry place away from direct sunlight.

Troubleshooting

If you encounter any issues with your phone holder, refer to the following common solutions:

• Holder is loose on handlebar: Ensure the handlebar clamp screw is fully tightened. Add or adjust the silicone pads to achieve a tighter fit for your handlebar diameter.
• Phone is not held securely: Verify that your phone's thickness is less than 15mm and that its width is within the 4.7-6.8 inch compatibility range. Ensure the safety lock is engaged after inserting the phone.
• Difficulty inserting/removing phone: Check that the safety lock is disengaged before attempting to remove the phone. Ensure no debris is obstructing the clamping mechanism.

Specifications

Warranty and Support

Lamicall products are designed for durability and performance. For any questions, technical support, or warranty claims, please contact Lamicall customer service through the retailer where you purchased the product or visit the official Lamicall website for contact information. Please retain your proof of purchase for warranty purposes.