SuperEye S3800 Gold Detector User Manual

Introduction

The SuperEye S3800 is a professional-grade metal detector designed for treasure hunting, offering high accuracy and versatility. It features five distinct operation modes and an 18 KHz operating frequency, making it suitable for detecting various metals, including small gold nuggets, jewelry, and coins. Its lightweight and ergonomic design ensures comfortable use during extended searches, and the waterproof search coil allows for effective use in shallow water environments.

This manual provides detailed instructions for the assembly, operation, maintenance, and troubleshooting of your S3800 Gold Detector. Please read it thoroughly before using the device to ensure optimal performance and safety.

Image: The SuperEye S3800 Gold Detector displayed alongside various gold artifacts, illustrating its purpose for finding precious metals.

Safety Information

• Do not submerge the control box: The control box is not waterproof and should be protected from moisture. Only the search coil is designed for use in water.
• Keep batteries out of reach of children: Batteries can be a choking hazard and harmful if ingested.
• Always follow local regulations regarding metal detecting: Be aware of and adhere to all local laws and regulations concerning metal detecting activities in your area.
• Use caution when digging: Always be mindful of potential underground utilities or hazards when excavating targets.

Setup and Assembly

Follow these steps to assemble your SuperEye S3800 Gold Detector:

1. Attach the Lower Stem: Connect the lower stem to the search coil. Ensure it is securely fastened.
2. Connect Middle and Upper Stems: Slide the middle stem into the lower stem, and then the upper stem into the middle stem. Adjust the length to your comfort using the adjustment holes and locking mechanisms.
3. Mount the Control Box: Secure the control box assembly to the upper stem.
4. Install Batteries: Open the battery compartment on the control box and insert 4x AA batteries (not included), ensuring correct polarity. Close the compartment securely.
5. Connect Search Coil Cable: Wrap the search coil cable around the stem and plug the connector into the corresponding port on the control box. Ensure the connection is firm.
6. Adjust Armrest: Position the armrest for comfortable use.

Image: An illustration detailing the adjustable components of the S3800, including the control box, stems, search coil, and armrest, highlighting its ergonomic design and adjustable length from 110-135 cm.

Assembly Video Guide

Operating Instructions

Control Panel Overview

The S3800 features an intuitive LCD control panel. Familiarize yourself with its indicators and buttons:

Image: A detailed diagram of the S3800 control panel, labeling key indicators such as Target ID Legend, Mode Cursor, Signal Strength Cursor, ID Cursor (Up Scale), Notch Cursor (Low Scale), Coin Depth Cursor, Pinpoint Cursor (Digital Cursor), Batty Cursor, and buttons for Mode, Sens, Disc, Elim, and Power.

• Target ID Legend: Displays the probable type of metal detected.
• Mode Cursor: Indicates the currently selected detection mode.
• Signal Strength Cursor: Shows the strength of the detected signal.
• ID Cursor (Up Scale): Provides a more precise identification of the target.
• Notch Cursor (Low Scale): Used for discrimination settings.
• Coin Depth Cursor: Estimates the depth of the detected coin.
• Pinpoint Cursor (Digital Cursor): Assists in precisely locating the target.
• Batty Cursor: Battery level indicator.
• MODE Button: Cycles through the five detection modes.
• SENS Button: Adjusts sensitivity.
• DISC Button: Activates discrimination mode.
• ELIM Button: Eliminates unwanted metal types.
• POWER Button: Turns the detector on/off.

Detection Modes

The S3800 offers five distinct detection modes to optimize your search for different types of targets and environments:

• ALL METAL: Detects all types of metal. Ideal for general searching or when you are unsure of the target type.
• DISCRIMINATION (DISC): Allows you to ignore certain types of junk metal (e.g., iron) and focus on more valuable targets.
• NOTCH: Enables you to accept or reject specific target categories by creating "notches" in the detection range.
• CUSTOM: Allows you to save your preferred discrimination and notch settings for quick access.
• JEWELRY: Optimized for finding jewelry, often by discriminating against iron and other common trash metals.

To switch between modes, press the MODE button. Use the DISC and ELIM buttons to fine-tune discrimination and notch settings within applicable modes.

Sensitivity Adjustment

Press the SENS button to adjust the detector's sensitivity. Higher sensitivity increases detection depth but can also lead to more false signals in mineralized ground or areas with electromagnetic interference. Adjust sensitivity to the highest stable level for your current environment.

Pinpointing Targets

Once a target is detected, use the pinpoint function to precisely locate it before digging. Press and hold the PIN button. Move the search coil slowly over the target area. The detector will provide an audio and visual indication (Pinpoint Cursor) to help you center the coil directly over the target.

Image: A user's hand pressing the 'PIN' button on the S3800 control panel, with the LCD screen displaying "PP" to indicate pinpoint mode, aiding in precise target location.

Waterproof Search Coil

The 210mm search coil is IP68 waterproof, allowing you to search in shallow water, such as beaches, streams, or ponds. Ensure the control box remains dry, as it is not waterproof.

Image: The S3800's IP68 waterproof search coil partially submerged in clear, shallow water, demonstrating its capability for detecting metals in wet environments.

Maintenance

• Cleaning: After each use, especially in sandy or wet conditions, wipe down the search coil and stem with a damp cloth. Ensure the control box is kept clean and dry. Do not use abrasive cleaners.
• Battery Care: Remove batteries if the detector will not be used for an extended period to prevent leakage. Always use fresh, high-quality AA batteries.
• Storage: Store the detector in a cool, dry place, away from extreme temperatures and direct sunlight. Disassemble if necessary for compact storage.
• Cable Inspection: Periodically check the search coil cable for any signs of wear or damage.

Troubleshooting

Specifications

Warranty and Support

For warranty information or technical support regarding your SuperEye S3800 Gold Detector, please contact SuperEye Products Co. directly. Refer to the product packaging or the official SuperEye website for contact details.

You can also visit the SuperEye Store on Amazon for additional product information and support resources.