1. Introduction
This instruction manual provides detailed guidance for assembling your ROBOTIME Ada's Studio DIY Miniature Dollhouse Kit, Model DG103. This kit allows you to construct a miniature artist's studio complete with furniture, accessories, and an integrated light. Please read all instructions carefully before beginning assembly to ensure a smooth and enjoyable building experience.
Image 1.1: The fully assembled Ada's Studio miniature dollhouse kit.
2. Safety Information
- This kit contains small parts and is recommended for individuals 14 years of age and older. Keep out of reach of young children to prevent choking hazards.
- Exercise caution when using sharp tools such as scissors or craft knives during assembly. Adult supervision is advised for younger users.
- Ensure proper ventilation when using adhesives and paints.
- The materials used in this kit are non-toxic. However, avoid ingestion.
3. Package Contents
Verify that all components listed below are present in your kit. Refer to the included English instruction manual for a detailed parts list and illustrations.
- Pre-cut wooden pieces for structural elements and furniture.
- Various paper and fabric sheets for decorations and soft furnishings.
- Small plastic or metal accessories (e.g., light fixture, miniature tools).
- LED light components and wiring.
- Adhesive (glue).
- Paint and brush.
- Assembly tools (e.g., tweezers, small screwdriver).
- Detailed English instruction manual with illustrations.
Image 3.1: Overview of the kit's main components and packaging.
Image 3.2: Examples of miniature items included in the kit.
4. Setup and Preparation
- Prepare Your Workspace: Choose a clean, well-lit, and spacious area. Protect your work surface from glue and paint.
- Gather Additional Tools: While some tools are provided, you may find the following helpful: a pair of fine-point scissors, a craft knife, a ruler, and possibly tweezers for handling small parts.
- Organize Components: Carefully unpack all materials. The wooden pieces are often numbered or coded; keep them organized according to the instruction manual's diagrams.
- Review Instructions: Read through the entire instruction manual once before starting to familiarize yourself with the steps and overall process.
5. Assembly Instructions
Follow the detailed, step-by-step instructions provided in your kit's manual. The process generally involves cutting, gluing, folding, and painting various components. Patience and precision are key to achieving the best results.
5.1 General Assembly Tips
- Test Fit First: Before applying glue, always test fit pieces to ensure they align correctly.
- Use Glue Sparingly: Apply a thin, even layer of glue. Excess glue can be messy and affect the appearance. Allow sufficient drying time for each glued joint.
- Follow Numbering: Adhere strictly to the numbering and coding system for parts as indicated in the manual.
- Refer to Illustrations: The manual includes detailed illustrations. Use these as visual guides for each step.
5.2 Key Assembly Steps (Illustrated Examples)
- Preparing Paper and Fabric Elements: Carefully cut out paper elements and fold fabric pieces as instructed. For example, pleating curtains or cutting window panes.
Image 5.1: Examples of cutting, gluing, and fabric preparation steps.
- Constructing Furniture: Assemble the various miniature furniture pieces such as the drawing table, easel, bookshelf, and stools. These often involve interlocking wooden pieces and gluing.
Image 5.2: Assembled miniature furniture components.
- Wiring the LED Light: Follow the specific instructions for connecting the LED light components. Ensure all connections are secure before integrating into the dollhouse structure.
- Decorating and Detailing: Once the main structure and furniture are assembled, proceed with adding the smaller decorative elements like paintings, plants, and art supplies.
Image 5.3: Detailed view of miniature desk accessories.
Image 5.4: Close-up of miniature art supplies.
6. Operating Instructions (LED Light)
The Ada's Studio kit includes an LED light to illuminate your miniature scene.
- Battery Installation: The kit requires batteries (not included). Locate the battery compartment, typically at the base or back of the dollhouse. Insert the specified battery type (e.g., 2x AAA batteries) according to the polarity markings (+/-).
- Turning On/Off: A small switch is usually provided to control the LED light. Flip the switch to the 'ON' position to illuminate the studio and to 'OFF' to conserve battery life.
Image 6.1: The dollhouse illuminated by its LED light.
7. Maintenance
- Cleaning: Dust the dollhouse gently with a soft, dry brush or cloth. Avoid using water or cleaning solutions, as they may damage the materials.
- Storage: Store the assembled dollhouse in a dry environment, away from direct sunlight and extreme temperatures, to prevent material degradation.
- Battery Replacement: If the LED light dims or stops working, replace the batteries with new ones of the correct type.
8. Troubleshooting
- Missing or Damaged Parts: If you discover any missing or damaged parts upon opening the kit, please contact ROBOTIME customer support with your purchase details.
- Pieces Not Fitting: Double-check the part numbers and orientations against the instruction manual. Sometimes a slight adjustment or gentle sanding may be required for a snug fit. Do not force pieces together.
- LED Light Not Working: Ensure batteries are correctly installed with the correct polarity. Check if the batteries are new and fully charged. Verify that all wiring connections are secure.
- Difficulty with Assembly Step: Refer to the detailed illustrations in the manual. If still unclear, search for online assembly videos or forums for visual guidance.
9. Specifications
| Feature | Detail |
|---|---|
| Model Number | DG103 |
| Product Dimensions (Assembled) | 19.51 x 17.5 x 17.5 cm |
| Item Weight | 331.12 g (0.73 Pounds) |
| Material Type | Engineered Wood |
| Recommended Age | 14 years and upwards |
| Batteries Required | Yes (Not Included) |
| Assembly Required | Yes |
Image 9.1: Assembled product dimensions.
10. Warranty and Support
For warranty information, please refer to the terms and conditions provided by your retailer at the time of purchase. ROBOTIME products typically come with a manufacturer's warranty against defects.
If you require technical assistance, have questions about assembly, or need to report missing/damaged parts, please contact ROBOTIME customer support through their official website or the contact information provided with your purchase.
