1. Introduction
This manual provides comprehensive instructions for the Zopsc M.2 NGFF to Dual USB 2.0 Riser Card, Model NGFFP2U-G01. This expansion card is designed to add two USB 2.0 ports to a compatible motherboard or notebook equipped with an M.2 Key A-E interface. Please read this manual carefully before installation and use.
Image 1.1: The Zopsc M.2 NGFF to Dual USB 2.0 Riser Card with its attached USB cables.
2. Package Contents
Verify that all items are present in the package:
- 1 x Zopsc M.2 NGFF to Dual USB 2.0 Riser Card
- 1 x Mounting Screw
Image 2.1: The M.2 NGFF to USB Riser Card and the included mounting screw.
3. Setup and Installation
This expansion card is designed for installation in a desktop PC or notebook with an available M.2 Key A-E slot. Ensure your system meets this requirement before proceeding.
Installation Steps:
- Power Off System: Completely shut down your computer and disconnect it from the power source.
- Access M.2 Slot: Open your computer case or notebook to access the motherboard. Locate an available M.2 Key A-E slot. Consult your system's manual if you are unsure of its location.
- Insert Riser Card: Carefully align the M.2 NGFF to USB Riser Card with the M.2 Key A-E slot. Insert the card firmly but gently into the slot at an angle.
- Secure Card: Once inserted, push the card down until it is parallel with the motherboard. Secure it with the provided mounting screw.
- Connect USB Devices: The card provides two USB 2.0 female ports via attached cables. Connect your desired mini USB devices to these ports.
- Reassemble and Power On: Close your computer case or notebook, reconnect the power, and power on your system.
Image 3.1: The M.2 NGFF to USB Riser Card showing its two USB 2.0 output ports.
4. Operating Instructions
Once installed, the Zopsc M.2 NGFF to Dual USB 2.0 Riser Card operates automatically. The two extended USB 2.0 ports function as standard USB ports, allowing you to connect various USB 2.0 compatible peripherals such as keyboards, mice, external storage, or other mini USB devices.
- Ensure that any connected USB devices have their necessary drivers installed on your operating system for proper functionality.
- The card is compatible with WinXP, Vista, Win7, and Win8 (32-bit/64-bit) operating systems.
5. Maintenance
The M.2 NGFF to Dual USB 2.0 Riser Card requires minimal maintenance.
- Cleaning: Keep the card and its connections free from dust and debris. Use compressed air to gently clean the card if necessary, ensuring the system is powered off and disconnected from power.
- Connections: Periodically check that the card is securely seated in its M.2 slot and that all USB connections are firm.
- Environment: Operate the card within standard computer operating temperatures and humidity levels to prevent damage.
6. Troubleshooting
If you encounter issues with your M.2 NGFF to Dual USB 2.0 Riser Card, refer to the following troubleshooting steps:
- Card Not Detected:
- Ensure the card is correctly and fully seated in the M.2 Key A-E slot.
- Verify that your motherboard's M.2 slot is enabled in the BIOS/UEFI settings, if applicable.
- Check for any visible damage to the card or the M.2 slot on the motherboard.
- Connected USB Devices Not Working:
- Test the USB devices on another known-working USB port to confirm their functionality.
- Ensure that the USB devices have the necessary drivers installed on your operating system.
- Try connecting different USB devices to the riser card's ports to isolate the issue.
- System Instability:
- Ensure your system's power supply is adequate for all installed components.
- Update your motherboard's chipset drivers and BIOS/UEFI to the latest version.
7. Specifications
Detailed technical specifications for the Zopsc M.2 NGFF to Dual USB 2.0 Riser Card:
| Feature | Specification |
|---|---|
| Brand | Zopsc |
| Model Number | NGFFP2U-G01 |
| Master Chip | GL850 |
| Input Interface | M.2 Key A-E NGFF |
| Output Ports | 2 x USB 2.0 |
| Supported OS | WinXP, Vista, Win7, Win8 (32-bit/64-bit) |
| Item Weight | 1.06 ounces (0.03 Kilograms) |
| UPC | 738587954828 |
Image 7.1: Detailed view of the card's components, including the GL850 master chip.
Image 7.2: Rear view of the card, displaying the model number NGFFP2U-G01.
8. Warranty and Support
Information regarding product warranty and customer support is not available in the provided product data. Please refer to the retailer or manufacturer's website for details on warranty coverage and support options.