Product Overview
The Moen Adler 87233SRS Kitchen Faucet combines classic design with modern functionality. It features a single-handle for precise control, a retractable spray head with Power Clean™ spray technology for enhanced cleaning, and a Spot Resist™ Stainless finish to minimize fingerprints and water spots. This faucet is designed for versatile installation in 1- or 3-hole sinks.
Figure 1: Moen Adler Spot Resist Stainless One-Handle High Arc Pulldown Kitchen Faucet.
Setup and Installation
For detailed installation instructions, please refer to the official Installation Manual PDF provided by Moen. A digital copy can be found here.
The installation process typically involves the following steps:
- Unpack Components: Verify all parts are present, including the faucet body, deck plate (if needed for 3-hole installation), rubber gasket, mounting bracket, mounting nut, hose protector, spray head, and water supply lines.
- Prepare for Installation: Decide whether to use the deck plate for 3-hole sinks or the rubber gasket for 1-hole sinks.
- Install Faucet Body: Insert the faucet body into the sink hole. From underneath the sink, slide the mounting bracket onto the main shaft, ensuring the water supply lines pass through the designated spaces. Secure it with the mounting nut.
- Attach Hose Protector: Put on the hose protector and tighten it by hand until snug.
- Connect Spray Head Hose: Connect the spray head to its hose. Push the hose all the way through the faucet body.
- Connect Main Water Line: Connect the spray hose with the main water line using the quick connector.
- Attach Weight: Clip the weight onto the hose at the yellow marker to ensure proper retraction of the spray head.
- Connect Water Supply Lines: Use Teflon tape where necessary on the threads of your water supply connections. Connect the hot and cold water supply lines to the corresponding inlets on the faucet and tighten with a wrench.
- Test for Leaks: Run water through the faucet and carefully check all connections for any leaks.
Figure 2: The Reflex system ensures smooth operation and secure docking of the pulldown spray head, while Power Clean technology provides 50% more spray power.
Figure 3: The Duralock quick connect system simplifies installation without the need for additional tools.
Operating Instructions
The Moen Adler faucet is designed for ease of use:
- Water Flow and Temperature Control: The single lever handle provides precise control over both water temperature and volume. Move the handle left for hot water, right for cold water, and up/down to adjust flow.
- Pulldown Spray Head: The spray head can be pulled down for extended reach and flexibility. It features the Reflex system for smooth operation and secure docking when not in use.
- Spray Modes: Easily switch between an aerated stream and a powerful rinse spray at the push of a button located on the spray head. The Power Clean™ spray technology delivers 50% more spray power for efficient cleaning.
Figure 4: The Moen Adler faucet seamlessly integrates into various kitchen décors, offering both style and functionality.
Maintenance
To maintain the appearance and functionality of your Moen Adler faucet:
- Cleaning the Finish: The Spot Resist™ Stainless finish is designed to resist fingerprints and water spots. Clean regularly with a soft, damp cloth and mild soap. Avoid abrasive cleaners, polishes, or harsh chemicals as they can damage the finish.
- Cleaning the Spray Head: Periodically clean the spray head nozzles to remove mineral buildup. You can gently rub the rubber nozzles with your finger or a soft brush to dislodge deposits.
- General Care: Ensure the faucet is not subjected to extreme temperatures. Regularly check for any loose connections or drips and address them promptly to prevent further issues.
Figure 5: Spot Resist™ Technology helps keep your faucet looking cleaner by resisting fingerprints and water spots.
Troubleshooting
If you encounter issues with your faucet, consider the following common solutions:
- Low Water Flow: Check if the aerator is clogged with debris. Unscrew the aerator from the spray head and clean it. Also, ensure that the water supply valves under the sink are fully open.
- Leaking: Inspect all connections for tightness. If leaks persist, the internal cartridges may need replacement. Refer to the installation manual or contact Moen customer support.
- Spray Head Not Retracting: Ensure the weight on the hose is properly positioned and not obstructed. The Reflex system relies on this weight for smooth retraction.
Specifications
| Feature | Detail |
|---|---|
| Brand | Moen |
| Model Name | Adler |
| Model Number | 87233SRS |
| Color | Spot Resist Stainless |
| Material | Zinc (Faucet Body), Stainless Steel (Handle) |
| Mounting Type | Deck Mount |
| Number of Handles | 1 |
| Hole Count | 1 (Optional deck plate for 3-hole installation) |
| Maximum Flow Rate | 1.5 Gallons Per Minute |
| Spout Height | 14.6 Inches |
| Spout Reach | 7.55 Inches |
| Hose Length | 68 Inches |
| Product Dimensions | 7.5"D x 10.25"W x 14.56"H |
| Item Weight | 0.01 Ounces |
| Special Features | Dual Function Sprayer |
| ADA Compliant | Yes |
Warranty and Support
The Moen Adler Kitchen Faucet is backed by a Limited Lifetime Warranty, ensuring long-term durability and reliability. For warranty claims, technical support, or additional product information, please visit the official Moen Store or contact Moen customer service.
Visit the Moen Store: Moen Official Store
Important Safety Information
Proposition 65 Warning: This product may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
