Bosch 2601016903 Metal Base Plate Instruction Manual

1. Introduction

This document provides instructions for the Bosch 2601016903 metal base plate, a genuine replacement part designed for various Bosch jigsaws. This base plate ensures stable guidance and protection during cutting operations. Please read these instructions carefully before installation and use to ensure proper function and safety.

Image 1: Bosch 2601016903 Metal Base Plate. This image shows the complete metal base plate, highlighting its robust construction and design.

2. Compatibility

The Bosch 2601016903 metal base plate is compatible with the following Bosch jigsaw models. Ensure your tool's model number matches one of the listed models for proper fit and function.

• Bosch 1581, 1581VS, 1581AVS, 1581DVS
• Bosch 1582, 1582VS, 1582DVS
• Bosch 1584VS, 1584AVS, 1584DVS
• Bosch 1587VS, 1587AVS, 1587DVS
• Bosch 7561
• Bosch B4200, B4201, B4300, B4301
• Bosch GST 60 P, GST 60 PB, GST 60 PBE, GST 60 PE
• Bosch GST 75 BE
• Bosch GST 80 PBE
• Bosch GST 85 P, GST 85 PE, GST 85 PBE, GST 85 PAE
• Bosch GST 500 PE
• Bosch GST 2000
• Bosch JS5

3. Installation

Follow these general steps to install the replacement metal base plate. Always refer to your specific jigsaw's instruction manual for detailed safety precautions and model-specific installation procedures.

1. Safety First: Disconnect the jigsaw from its power source before attempting any installation or maintenance.
2. Remove Old Base Plate: Locate the fasteners (screws or clamps) that secure the existing base plate to the jigsaw. Loosen and remove these fasteners. Carefully detach the old base plate.
3. Verify Compatibility (Serial Number): Before attaching the new base plate, it is crucial to verify the serial number of your Bosch machine. This ensures the base plate is the correct replacement part for your specific tool.

Image 2: Example of a Bosch Jigsaw Serial Number. This image illustrates where to find the 10-digit Bosch machine type serial number on a tool. The number highlighted in red (e.g., 3603JB0300) must match your device's specifications for proper part compatibility.

4. Attach New Base Plate: Align the new Bosch 2601016903 metal base plate with the mounting points on your jigsaw. Ensure it sits flush and correctly.
5. Secure Fasteners: Reinsert and tighten the fasteners securely. Do not overtighten, but ensure the base plate is firmly attached and does not wobble.
6. Check Alignment: After installation, check the alignment of the base plate with the saw blade. Adjust if necessary according to your jigsaw's manual.

4. Usage

The metal base plate serves as a critical component for accurate and stable cutting with your jigsaw. It provides a flat surface that glides over the workpiece, ensuring precise cuts and protecting the material from scratches. Always ensure the base plate is clean and free of debris before starting any cutting operation.

For specific operational instructions, including angle adjustments and blade changes, refer to the instruction manual of your Bosch jigsaw.

5. Maintenance

Regular maintenance of your metal base plate will extend its lifespan and ensure optimal performance of your jigsaw.

• Cleaning: After each use, clean the base plate to remove sawdust, debris, and any residue. A dry cloth is usually sufficient. For stubborn grime, a mild cleaning agent can be used, ensuring it does not damage the metal.
• Inspection: Periodically inspect the base plate for signs of wear, damage, or deformation. A bent or damaged base plate can affect cutting accuracy and safety.
• Fastener Check: Ensure all fasteners securing the base plate remain tight. Loose fasteners can lead to instability during operation.
• Storage: Store your jigsaw in a clean, dry environment to prevent corrosion or damage to the metal base plate.

6. Troubleshooting

If you encounter issues related to the base plate, consider the following:

• Wobbling Base Plate:
  • Check if the fasteners are securely tightened.
  • Ensure the base plate is correctly seated in its mounting grooves.
• Inaccurate Cuts:
  • Verify the base plate is not bent or damaged.
  • Confirm the base plate is properly aligned with the saw blade.
• Scratches on Workpiece:
  • Clean the underside of the base plate to remove any abrasive debris.
  • Consider using a non-marring shoe cover if available for your jigsaw model.

For issues not resolved by these steps, consult a qualified service technician or contact Bosch customer support.

7. Specifications

8. Warranty & Support

This Bosch genuine replacement part is manufactured to high-quality standards. For information regarding warranty coverage, please refer to the warranty documentation provided with your original Bosch power tool or visit the official Bosch website for your region. For technical support or service inquiries, please contact Bosch customer service.

You can find contact information and further resources on the official Bosch website: www.bosch-professional.com