1. Introduction
This manual provides essential instructions for the safe and efficient use of your Intex Comfort Dura-Beam Elevated Airbed. Designed for comfort and convenience, this airbed features Dura-Beam technology and an internal electric pump for quick inflation and deflation. Please read all instructions carefully before setup and operation.
2. Key Features
- Dura-Beam Technology: Thousands of high-strength polyester fibers provide enhanced support and comfort, preventing sagging.
- Internal Electric Pump: Built-in 110-120V pump for quick inflation and deflation with a simple switch.
- Elevated Height: 18-inch elevated surface for easier entry and exit.
- Soft-Flocked Surface: Provides extra comfort and helps keep fitted sheets in place.
- Edge Support: Indented sides and raised top/bottom edges secure fitted sheets and provide stability.
- Portable: Includes a convenient carry bag for storage and transport.
3. Setup Instructions
- Unpack: Remove the airbed from its carry bag and unroll it on a clean, flat surface. Ensure the area is free of sharp objects.
- Locate Pump: Find the built-in electric pump on the side of the airbed.
- Connect Power: Open the pump compartment cover and pull out the power cord. Plug the cord into a standard 110-120V electrical outlet.
- Inflate: Turn the pump dial to the 'Inflate' position (indicated by a '+' sign or upward arrow). The airbed will begin to inflate.
- Adjust Firmness: Allow the airbed to inflate for approximately 4-5 minutes for King size. Once desired firmness is reached, turn the pump dial to the 'Off' position.
- Secure Cord: Unplug the power cord and store it neatly back into the pump compartment. Close the compartment cover securely.
4. Operating Instructions
The Intex Comfort Dura-Beam Airbed is designed for ease of use. Once inflated, it provides a stable and comfortable sleeping surface. The flocked top surface helps prevent sheets from slipping, and the elevated height makes it comparable to a traditional bed.
- Firmness Adjustment: If the airbed feels too soft, briefly turn the pump dial to 'Inflate' to add more air. If it feels too firm, briefly turn the dial to 'Deflate' to release a small amount of air.
- Sheet Compatibility: Standard King-size fitted sheets are recommended. The indented sides and raised edges are designed to keep sheets securely in place.
5. Maintenance
- Cleaning: To clean the airbed, wipe the flocked surface with a damp cloth and mild soap. Do not use harsh chemicals or abrasive cleaners. Ensure the airbed is completely dry before storing.
- Storage: After deflation, ensure the airbed is clean and dry. Fold it neatly and place it back into the provided carry bag. Store in a cool, dry place away from direct sunlight and extreme temperatures.
- Puncture Repair: In case of a small puncture, use a standard vinyl repair kit (not included) to patch the affected area. Follow the repair kit instructions carefully.
6. Troubleshooting Guide
| Problem | Possible Cause | Solution |
|---|---|---|
| Airbed deflates slowly | Small puncture or leak; valve not fully closed. | Check for punctures and repair. Ensure pump dial is in 'Off' position and compartment cover is sealed. |
| Pump not operating | Not plugged in; power outage; pump malfunction. | Ensure power cord is securely plugged into a working outlet. Check household circuit breaker. Contact customer support if issue persists. |
| Airbed not firm enough | Insufficient inflation. | Add more air by turning the pump dial to 'Inflate' for a short period. |
7. Product Specifications
| Feature | Detail |
|---|---|
| Model Name | Dura-Beam |
| Model Number | 64409ST |
| Size | King |
| Product Dimensions (L x W x H) | 80" x 72" x 18" |
| Weight Capacity | 600 lbs (272 kg) |
| Inflation Time (Approx.) | 4-5 minutes |
| Pump Voltage | 110-120V |
| Material | Polyester fibers (Fiber-Tech) |
| Color | Grey |
| Special Feature | Inflatable, Built-in Pump |
8. Storage Instructions
- Deflate: Plug the power cord into an electrical outlet. Turn the pump dial to the 'Deflate' position (indicated by a '-' sign or downward arrow). The airbed will begin to deflate.
- Assist Deflation: Gently press on the airbed to help expel remaining air. This ensures a more compact fold.
- Unplug & Store Cord: Once fully deflated, turn the pump dial to 'Off', unplug the power cord, and store it back in its compartment.
- Fold: Fold the deflated airbed neatly. An accordion fold is recommended for best results.
- Pack: Place the folded airbed into the provided carry bag.
- Store: Keep the airbed in a cool, dry place, protected from direct sunlight and extreme temperatures.
9. Warranty and Customer Support
The Intex Comfort Dura-Beam Elevated Airbed (Model 64409ST) comes with a 1-year limited warranty. For warranty claims, product inquiries, or technical assistance, please refer to the contact information provided in the product packaging or visit the official Intex website.
For additional support and product information, you may visit the Intex Store on Amazon.
