Introduction
This manual provides comprehensive instructions for the Kircuit Car Charger Cord, designed to power and charge your Mio MOOV GPS devices (models 330, 340, 350, 360, 370, 380, and 500) while in your vehicle. Please read this manual carefully before use to ensure proper operation and safety.
Image: Kircuit Car Charger Cord. This image displays the compact design of the car charger cord, featuring a standard car power adapter plug on one end and a connector for Mio MOOV GPS devices on the other.
Product Features
- Input Voltage: Supports DC 12-24V vehicle power systems.
- Output Voltage: Provides a stable 5V DC output for compatible devices.
- Safety Protections: Built-in Dynamic IC, Charger IC, and power fuse for rapid charging and protection against overcharge, short circuits, excess voltage, over temperature, and overcurrent.
- Durable Construction: Designed for reliability and longevity in automotive environments.
Image: Diagram illustrating built-in safety protections. This graphic highlights the charger's safeguards including short circuit protection, excess voltage protection, overcurrent protection, and over temperature protection, centered around the Kircuit brand.
Setup and Installation
- Locate Vehicle Power Outlet: Identify the 12V or 24V DC power outlet (cigarette lighter socket) in your vehicle.
- Connect to GPS Device: Plug the small connector end of the Kircuit Car Charger Cord into the charging port of your Mio MOOV GPS device.
- Insert into Vehicle Outlet: Insert the car adapter end of the charger cord firmly into your vehicle's power outlet.
- Verify Power: Your Mio MOOV GPS device should indicate that it is receiving power or charging.
Ensure all connections are secure before driving.
Operating Instructions
Once connected, the Kircuit Car Charger Cord will automatically begin supplying power to your Mio MOOV GPS device. It is designed for continuous use during vehicle operation.
- The charger provides a stable power supply, allowing your GPS device to operate and charge simultaneously.
- Disconnect the charger from the vehicle's power outlet when not in use for extended periods to prevent minor battery drain.
Safety Information
- Do not expose the charger to moisture, rain, or extreme temperatures.
- Avoid dropping or subjecting the charger to severe impacts.
- Do not attempt to disassemble or modify the charger. This will void the warranty and may cause damage or injury.
- Keep out of reach of children.
- Ensure the charger is compatible with your device's power requirements before use.
Maintenance
- Clean the charger with a soft, dry cloth. Do not use liquid cleaners or solvents.
- Regularly check the cable and connectors for any signs of wear or damage. If damage is observed, discontinue use immediately.
- Store the charger in a cool, dry place when not in use.
Image: Close-up of the charger's durable cable design. This image illustrates the high-quality materials and thick insulation layer of the power cable, designed to resist wear, tear, and high temperatures.
Image: Comparison of secure plug design. This graphic highlights the robust construction of the charger's plug, ensuring a stable and secure connection capable of handling electrical loads without overheating.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Device not charging/powering on. | Loose connection. | Ensure both ends of the charger cord are securely plugged in. |
| Device not charging/powering on. | Vehicle power outlet issue. | Test the vehicle power outlet with another known working device. Check vehicle fuse if necessary. |
| Device not charging/powering on. | Damaged charger cord. | Inspect the cord for visible damage. Discontinue use if damaged and replace. |
| Slow charging. | High power consumption by GPS device. | Close unnecessary applications on the GPS device. Ensure the device is not running intensive tasks. |
Specifications
- Brand: Kircuit
- Model Compatibility: Mio MOOV 330, 340, 350, 360, 370, 380, 500
- DC Input: 12-24V
- DC Output: 5V
- Item Weight: Approximately 8 ounces (227 grams)
- ASIN: B082KLPNGD
Warranty and Support
Kircuit products are manufactured to high-quality standards. For warranty information or technical support, please refer to the contact details provided with your purchase or visit the official Kircuit website.
Image: Assortment of Kircuit power adapters. This image showcases various Kircuit adapters, illustrating the brand's commitment to quality control and diverse product offerings that meet high standards of safety and performance.