1. Introduction
This manual provides essential information for the safe and effective use of your Kircuit AC Power Cord. This power cord is specifically designed to provide reliable power to the Blitzwolf 2.1 Channel Wireless Soundbar 60W (BW-SDB2). Please read this manual thoroughly before use and retain it for future reference.
2. Safety Information
Always observe the following safety precautions to prevent damage to the product or injury to yourself.
- Ensure the power cord is fully inserted into both the power outlet and the device.
- Do not use the power cord if it is damaged, frayed, or has exposed wires.
- Avoid placing heavy objects on the power cord or bending it sharply.
- Keep the power cord away from water, heat sources, and sharp edges.
- This power cord features Over Voltage Protection (OVP), Over Current Protection (OCP), and Short Circuit Protection (SCP) to safeguard your device.
Image: Built-in Safety Protections. This diagram illustrates the various safety features integrated into the Kircuit power cord, including protection against short circuits, excess voltage, overcurrent, and over temperature, ensuring safe operation.
3. Product Features
The Kircuit AC Power Cord is designed for durability and reliable performance.
- Protection Features: Equipped with OVP (Over Voltage Protection), OCP (Over Current Protection), and SCP (Short Circuit Protection) to ensure the safety of your connected device.
- Cable Length: Provides a convenient length of 6 feet (approximately 1.8 meters) for flexible placement.
- Connector Type: Features a standard USA 2-prong plug for wall outlets and a compatible connector for the Blitzwolf BW-SDB2 Soundbar.
- Quality Assurance: Each unit is tested to ensure great working condition and reliability.
Image: Kircuit AC Power Cord. This image displays the Kircuit AC power cord, featuring a standard 2-prong US plug on one end and a figure-8 (C7) connector on the other, designed for compatibility with various electronic devices.
Image: Durable Cable Design. This image highlights the durable construction of the power cable, showing its high-quality materials, thick insulation layer, and abrasion-resistant outer sheathing designed to prevent wear and damage.
Image: Secure Plug Design. This image compares the Kircuit plug with others, demonstrating its well-made design for a secure and stable connection, capable of handling electrical loads without overheating.
4. Setup
Follow these steps to connect your Kircuit AC Power Cord to the Blitzwolf BW-SDB2 Soundbar:
- Locate the power input port on your Blitzwolf BW-SDB2 Soundbar. This is typically a figure-8 (C7) shaped port.
- Insert the C7 connector end of the Kircuit AC Power Cord firmly into the soundbar's power input port.
- Plug the 2-prong end of the power cord into a standard USA wall outlet.
- Ensure both connections are secure to prevent power interruptions.
5. Operating
Once the power cord is securely connected, the Blitzwolf BW-SDB2 Soundbar should receive power. Refer to your soundbar's instruction manual for specific operating procedures, such as turning it on, adjusting settings, and connecting audio sources.
6. Maintenance
Proper care will extend the life of your power cord:
- Cleaning: Disconnect the power cord from both the outlet and the device before cleaning. Wipe with a dry, soft cloth. Do not use liquid cleaners.
- Storage: When not in use, coil the cord loosely. Avoid tight coiling or kinking, which can damage the internal wires. Store in a cool, dry place.
- Inspection: Periodically inspect the cord for any signs of damage, such as cuts, fraying, or discoloration. Replace immediately if damage is found.
7. Troubleshooting
If you encounter issues, consider the following:
- No Power to Soundbar:
- Ensure the power cord is fully plugged into both the wall outlet and the soundbar.
- Check if the wall outlet is functional by plugging in another device.
- Inspect the power cord for any visible damage. If damaged, discontinue use and replace.
- Intermittent Power:
- Verify all connections are tight and secure.
- Avoid bending the cord at sharp angles near the connectors.
If problems persist, consult the Blitzwolf BW-SDB2 Soundbar's manual or contact Kircuit customer support.
8. Specifications
| Specification | Detail |
|---|---|
| Brand | Kircuit |
| Model | AC Power Cord |
| Compatibility | Blitzwolf 2.1 Channel Wireless Soundbar 60W (BW-SDB2) |
| Cable Length | 6 feet (1.8 meters) |
| Connector Gender | Male-to-Female (2-prong US plug to C7 connector) |
| Plug Format | Type B (US 2-prong) |
| Protection Features | OVP, OCP, SCP |
| Item Weight | 8 ounces |
| UL Listed | No |
9. Warranty and Support
Kircuit products are manufactured with quality and reliability in mind. While specific warranty details are not provided in this manual, please refer to your purchase documentation or contact Kircuit customer support for information regarding warranty coverage and technical assistance.
Manufacturer: Kircuit
Date First Available: December 10, 2019