Tonton 3MP Ultra HD Wireless Security Camera System with 8-Channel NVR Recorder User Manual

1. Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of your Tonton 3MP Ultra HD Wireless Security Camera System with 8-Channel NVR Recorder. This system is designed for reliable surveillance, offering high-definition video recording and remote access capabilities.

The Tonton NVR supports up to 16 channels and is compatible with 4K, 8MP, 5MP, 4MP, 3MP, 2MP, and 1080P IP cameras. It features H.265 & H.264 compression technology, VGA & HDMI output (up to 4K), and supports various recording modes including full-time, scheduled, and motion detection. Remote viewing is available via a free app on smartphones, as well as software or web browsers on Mac and PC.

2. Package Contents

Please verify that all items listed below are included in your package:

• 1 x Tonton 8-Channel NVR Recorder (1TB Hard Drive Pre-installed)
• 1 x USB Mouse
• 1 x Power Supply for NVR
• 1 x User Manual (this document)

Note: Security cameras are sold separately or as part of a complete kit. This NVR is designed to work with Tonton wireless IP cameras.

3. System Setup

3.1 Initial NVR Connection

1. Connect the NVR: Plug the provided power supply into the NVR's DC12V port and then into a power outlet.
2. Connect Display: Connect a monitor to the NVR using either the HDMI or VGA port.
3. Connect Mouse: Plug the USB mouse into one of the NVR's USB ports.
4. Network Connection (Optional for initial setup, required for remote viewing): Connect an Ethernet cable from the NVR's NET port to your router for internet access.

Figure 3.1: Rear panel of the NVR with connection ports.

3.2 Camera Pairing (Plug and Play)

The Tonton wireless security camera system is designed for true plug-and-play operation. Cameras automatically connect to the NVR's dedicated WiFi network.

1. Power On Cameras: Connect each wireless camera to its respective power adapter and plug it into a power outlet.
2. Automatic Connection: The cameras will automatically search for and connect to the NVR's internal WiFi network. Live video feeds should appear on your connected monitor within minutes.
3. Wireless Repeater Function: Cameras can act as repeaters, extending the wireless range. They connect to the NVR's WiFi, not your home WiFi.

Figure 3.2: Wireless solution range and connectivity diagram.

3.3 Remote Viewing Setup

To view your camera feeds remotely, you need to connect the NVR to the internet and configure the mobile application or PC software.

1. NVR Internet Connection: Ensure the NVR is connected to your router via an Ethernet cable.
2. Download App: Download the free Tonton security app from your smartphone's app store (iOS or Android).
3. Add Device: Open the app, create an account, and follow the on-screen instructions to add your NVR. This typically involves scanning a QR code displayed on the NVR's monitor interface.
4. PC/Mac Software: For desktop viewing, install the dedicated software from the Tonton support website.

4. Operating Instructions

4.1 Recording Modes

The NVR comes with a pre-installed 1TB hard drive for automatic recording. You can configure the recording mode via the NVR's on-screen menu:

• Full-time Recording: Continuous recording 24/7.
• Schedule Time Recording: Set specific times for recording.
• Motion Detection Recording: Recording starts only when motion is detected.

Figure 4.1: H.265+ compression for efficient storage.

4.2 Motion Detection and Email Alerts

The NVR supports motion detection and can send email alerts when motion is detected.

1. Configure Motion Detection: Access the NVR's menu to define motion detection zones and sensitivity for each camera.
2. Set Up Email Alerts: In the NVR's network settings, configure your email server details to enable email notifications. Any detected motion will trigger an email alert to your specified address.

4.3 Playback and Backup

You can review recorded footage directly from the NVR or remotely via the app/software.

• Local Playback: Use the NVR's interface to search for recordings by time or event.
• Remote Playback: Access recorded videos through the mobile app or PC software.
• USB Backup: Connect a USB flash drive to the NVR's USB port to back up important video files.

5. Maintenance

Regular maintenance ensures optimal performance and longevity of your security system.

• Clean Equipment: Periodically wipe the NVR and camera lenses with a soft, dry cloth. Avoid abrasive cleaners.
• Firmware Updates: Check the Tonton official website for any available firmware updates for your NVR and cameras. Follow instructions carefully for updates.
• Hard Drive Management: The 1TB HDD will overwrite older footage when full. Regularly back up critical recordings.
• Power Supply Check: Ensure all power adapters are securely connected and free from damage.

6. Troubleshooting

This section addresses common issues you might encounter.

• No Video Display:
  • Check NVR power connection.
  • Verify monitor connection (HDMI/VGA) and input source.
  • Ensure cameras are powered on.
• Cameras Not Connecting:
  • Ensure cameras are within range of the NVR's wireless signal.
  • Check camera power.
  • If using an extension antenna, ensure it is properly installed.
  

  Figure 6.1: Wireless extension antenna setup.

• Remote Viewing Not Working:
  • Confirm NVR is connected to the internet via Ethernet.
  • Check your router's internet connection.
  • Ensure the app/software is updated and the NVR is correctly added.
• No Recording:
  • Verify the 1TB hard drive is detected and functioning.
  • Check recording schedule and motion detection settings.

If issues persist, please contact Tonton technical support.

7. Specifications

8. Warranty and Support

Your Tonton Security Camera System comes with a 1-Year Warranty from the date of purchase.

For technical assistance, troubleshooting, or warranty claims, please contact Tonton Technical Support. Refer to the contact information provided on the Tonton official website or your purchase documentation.