Introduction
The SCANGRIP UV-Light 03.5801US is a rechargeable LED hand-held work light designed for flexible and efficient UV curing. This device is suitable for small and medium areas, offering features like a turnable sturdy hook, a strong built-in magnet for versatile positioning, and an intelligent battery indicator. It is engineered to perform UV curing without generating excessive heat on the panel or paint, making it safe for use on plastic and other heat-sensitive materials. Its ergonomic design ensures a comfortable grip during operation.
Safety Information
- UV Radiation: This product emits UV radiation. Avoid direct exposure of eyes and skin to the UV light. Always wear appropriate UV protective eyewear and skin protection when operating the device.
- Ventilation: Ensure adequate ventilation in the work area to prevent accumulation of fumes from curing materials.
- Flammable Materials: Do not use the UV light near flammable liquids or gases.
- Battery Safety: Use only the specified charger and battery. Do not expose the battery to extreme temperatures or disassemble it.
- Children: Keep the device out of reach of children.
Package Contents
- SCANGRIP UV-Light 03.5801US Unit
- Rechargeable Lithium-Ion Battery (pre-installed or separate)
- Charging Cable / Adapter
- Instruction Manual
Setup
- Initial Charge: Before first use, fully charge the device. Connect the charging cable to the device's USB port and plug the adapter into a power outlet. The battery indicator lights will show charging progress.
- Battery Installation (if separate): If the battery is not pre-installed, open the battery compartment, insert the Lithium-Ion battery according to polarity markings, and securely close the compartment.
- Familiarize with Features:
- Belt Clip & Hook: The integrated belt clip and turnable hook allow for flexible positioning and hands-free operation.
- Magnetic Base: The strong built-in magnet enables attachment to metallic surfaces for stable placement.
- Flexible Lamp Head: The lamp head can be tilted up to 180 degrees to direct the UV light precisely.
Image: SCANGRIP UV-Light highlighting its clip, hook, battery indicator, and flexible lamp head.
Operating Instructions
- Power On/Off: Press and hold the power button (usually located on the back or side) to turn the UV light on or off.
- Setting the Timer: The device features a timer function, typically adjustable from 1 to 5 minutes. Use the '+' and '-' buttons (or similar controls) to select the desired curing duration. The indicator lights will show the selected time.
- Positioning the Light:
- For hands-free operation, use the built-in magnet to attach the light to a metallic surface or the sturdy hook to hang it.
- Adjust the flexible lamp head to direct the UV light precisely onto the area to be cured.
- Curing Process:
- Ensure the area to be cured is clean and prepared according to the material manufacturer's instructions.
- Position the UV light at an appropriate distance from the surface. Refer to the material's specifications for optimal curing distance and time.
- Activate the UV light and allow it to run for the set duration. Monitor the curing process, ensuring even exposure.
- The device is designed to cure UV primers, body fillers, and clears without generating heat, making it safe for plastic and heat-sensitive materials.
- Battery Indicator: The intelligent battery indicator keeps you informed about the remaining battery level, allowing you to recharge as needed.
Image: Demonstrating the handheld use of the SCANGRIP UV-Light for curing on a car panel.
Image: The SCANGRIP UV-Light utilizing its magnetic base for stable positioning on a vertical metal surface.
Video: Official SCANGRIP video demonstrating the use of specialized LED work lights for fast UV curing in automotive repair. This video showcases various SCANGRIP UV curing products, including the handheld UV-Light, in action within a professional paint booth environment. It highlights the efficiency and speed of UV curing technology for body and paint repair.
Maintenance
- Cleaning: Regularly clean the device with a soft, damp cloth. Do not use harsh chemicals or abrasive cleaners. Ensure the UV lens is free from dust and debris for optimal performance.
- Storage: Store the UV light in a cool, dry place away from direct sunlight and extreme temperatures.
- Battery Care: For prolonged battery life, avoid fully discharging the battery frequently. Recharge the battery when the indicator shows low power. If storing for extended periods, charge the battery to approximately 50% every few months.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Device does not turn on. | Low or depleted battery. | Charge the battery fully. |
| Device does not turn on. | Battery not properly installed. | Check battery polarity and ensure it is seated correctly. |
| Poor curing results. | Incorrect curing distance or time. | Adjust distance and time according to material manufacturer's recommendations. |
| Poor curing results. | Dirty UV lens. | Clean the UV lens with a soft cloth. |
| Battery indicator not working. | Device malfunction. | Contact customer support. |
Specifications
- Model: 03.5801US (UV-Light)
- Power Source: Battery Powered
- Light Source Type: LED
- Battery Cell Composition: Lithium Ion
- Number of Batteries: 1 (included)
- Item Weight: 1.06 Pounds (approx. 0.48 kg)
- Package Dimensions: 8 x 3.5 x 3 inches (approx. 20.3 x 8.9 x 7.6 cm)
- Water Resistance Level: Not Water Resistant
- Features: Turnable sturdy hook, strong built-in magnet, intelligent battery indicator, ergonomic design.
Warranty and Support
This SCANGRIP product is covered by a manufacturer's warranty against defects in materials and workmanship. For specific warranty terms, registration, or technical support, please refer to the official Scangrip website or contact their customer service department. Keep your proof of purchase for warranty claims.
