1. Introduction
This manual provides essential information for the safe and efficient installation, operation, and maintenance of your Utilitech 3-Pack LED Recessed Retrofit Downlights. These lights are designed to illuminate various areas of your home, offering energy-efficient and long-lasting lighting solutions.
The Utilitech 3-pack of recessed retrofit downlights is compatible with most 5-inch or 6-inch new construction and remodel housings. Each 10.5-watt (65-watt equivalent) integrated LED unit provides 650 lumens of soft white light (2700K) and is engineered for 35,000 hours of maintenance-free operation. They are suitable for use in damp or wet locations and are dimmable with most 120-volt incandescent, magnetic low-voltage, or electronic low-voltage dimmers.
2. Safety Information
Please read all instructions carefully before installation and retain this manual for future reference. Failure to follow these instructions may result in electric shock, fire, or other hazards.
- Always turn off power at the circuit breaker before beginning installation or performing any maintenance.
- Ensure the supply voltage is compatible with the fixture (120 Volts).
- Do not attempt to alter or modify the fixture.
- Consult a qualified electrician if you are unsure about the installation process.
- These fixtures are suitable for damp and wet locations.
- Ensure proper grounding to avoid electrical hazards.
- Only use dimmers specified as compatible with LED lighting.
3. Package Contents
Verify that all components are present before beginning installation:
- 3 x Utilitech LED Recessed Retrofit Downlights
- Friction Clips (pre-attached or included)
- Spring Clips (pre-attached or included)
- Medium-based screw-in adapters
Image 1: Packaging for the Utilitech 3-Pack LED Recessed Retrofit Downlights, showing the product box with "2700K Soft White LED Recessed Retrofit Downlights" and "3 ct" indicating a pack of three.
Image 2: Three individual Utilitech LED Recessed Retrofit Downlights, each with a white baffle trim, black housing, and a medium-based screw-in adapter with wiring.
4. Setup and Installation
These retrofit downlights are designed for easy installation into existing 5-inch or 6-inch recessed housings. The LED connector is a medium-based screw-in adapter, and the units include both friction clips and spring clips for versatile installation.
- Turn Off Power: Before starting, ensure the power to the existing recessed fixture is turned off at the circuit breaker.
- Remove Existing Bulb and Trim: Carefully remove the old light bulb and any existing trim from the recessed housing.
- Connect Adapter: Screw the medium-based adapter of the new LED downlight into the existing socket within the recessed housing.
- Secure the Downlight:
- For Housings with Ears: Use the spring clips. Squeeze the spring clips together and insert them into the ears inside the recessed housing.
- For Housings Without Ears: Use the friction clips. Push the downlight firmly into the housing until the friction clips secure it in place.
- Test: Restore power at the circuit breaker and test the new downlight.
Image 3: A single Utilitech LED Recessed Retrofit Downlight, highlighting the white baffle, black housing, and the attached medium-based screw-in adapter, ready for installation.
5. Operating Instructions
The Utilitech LED Recessed Retrofit Downlights are designed for simple operation.
- Power On/Off: Control the light using your standard wall switch connected to the circuit.
- Dimming: These downlights are fully dimmable from 10% to 100% with most 120-volt incandescent, magnetic low-voltage, or electronic low-voltage dimmers. For optimal performance, ensure your dimmer is compatible with LED lighting.
- Light Output: Each unit provides 650 lumens of 2700K (warm white) light, creating a comfortable ambiance.
6. Maintenance
The Utilitech LED Recessed Retrofit Downlights are designed for 35,000 hours of maintenance-free operation, meaning no bulb replacement is necessary.
- Cleaning: To clean the fixture, ensure power is off. Wipe gently with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- Inspection: Periodically inspect the fixture for any signs of damage or loose connections. If any issues are found, turn off power and consult a qualified electrician.
7. Troubleshooting
If you encounter issues with your Utilitech LED Recessed Retrofit Downlights, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on. | No power to the fixture; loose connection; faulty fixture. | Check circuit breaker. Ensure all connections are secure. If problem persists, consult an electrician or contact customer support. |
| Light flickers or dims inconsistently. | Incompatible dimmer switch; loose wiring. | Ensure dimmer is compatible with LED lighting. Check wiring connections. |
| Delay in turning on when using a dimmer switch. | Characteristic of some dimmer/LED combinations. | This can be normal behavior for certain dimmer switches. If the delay is excessive or bothersome, consider trying a different LED-compatible dimmer. |
| Fixture does not fit snugly in housing. | Incorrect clip usage; housing size mismatch. | Ensure correct use of friction or spring clips for your housing type. Verify housing diameter is 5-in or 6-in. |
8. Specifications
| Feature | Detail |
|---|---|
| Model Number | MQTL1113-L10.5K9027 |
| Brand | Utilitech |
| Wattage | 10.5 Watts (65-watt equivalent) |
| Brightness | 650 Lumens |
| Color Temperature | 2700K (Warm White) |
| Dimmable | Yes, 10% to 100% with compatible 120V dimmers |
| Housing Compatibility | 5-inch or 6-inch recessed housings |
| Lifespan | 35,000 hours |
| Indoor/Outdoor Usage | Indoor (Suitable for damp or wet locations) |
| Voltage | 120 Volts |
| Certifications | ENERGY STAR certified, ETL and ES rated |
| Material | Aluminum (baffle trim), Plastic (shade) |
| Included Components | Friction Clips, Spring Clips |
| Item Weight | 1.94 pounds (for the pack) |
| Package Dimensions | 15.47 x 8.43 x 3.43 inches |
9. Warranty and Support
For warranty information or technical support, please contact Utilitech customer service. Keep your purchase receipt as proof of purchase.
While specific warranty details are not provided in this manual, Utilitech products typically come with a manufacturer's warranty covering defects in materials and workmanship. Please refer to the product packaging or the official Utilitech website for the most current warranty policy.
For assistance with installation, troubleshooting, or product inquiries, please visit the official Utilitech support channels or contact their customer service department.
