Introduction
This manual provides detailed instructions for the assembly, operation, and maintenance of your VIVO Electric 60 x 24 inch Height Adjustable Standing Desk. Please read this manual thoroughly before assembly and use to ensure proper function and safety. Keep this manual for future reference.
Image: The VIVO Electric 60 x 24 inch Stand Up Desk in black, set up with dual monitors and various office items, showcasing its spacious design.
Safety Information
Always assemble the desk according to the provided instructions. Do not exceed the maximum weight capacity of 154 lbs to ensure stability and safety. Failure to adhere to these guidelines may result in injury or damage to the product.
Product Features
- Active Standing: Seamlessly transition between sitting and standing positions for an ergonomic workstation.
- Spacious Desktop: A 59" x 23.6" (60 x 24 inch) desktop provides ample space for monitors, accessories, and work essentials. The surface is made of sturdy particle board, offering a smooth and scratch-resistant finish.
- Powerful Electric Motor: Features a robust motor for smooth and quiet height adjustments, ranging from 28.6" to 46.7".
- Strong Steel Frame: All-steel construction ensures stability and supports up to 154 lbs, accommodating various monitor and laptop setups.
- Intuitive 2-Button Controller: Easily adjust desk height with simple up/down buttons.
Image: The VIVO 60-inch Sit/Stand Workstation, highlighting its adjustable height and the 2-button controller for easy transitions.
Setup and Assembly
Follow these steps for proper assembly of your VIVO Electric Standing Desk. For a visual guide, please refer to the official assembly video below.
Assembly Video Guide
Video: Official VIVO assembly guide for the Electric Desk Frames (DESK-V100EW/B), demonstrating step-by-step installation of components.
Step-by-Step Assembly
- Attach the Feet to the Legs: Secure the feet to the bottom of each desk leg using the provided screws and tools.
- Adjust the Crossbar: Position and secure the crossbar between the two leg assemblies. Ensure it is properly aligned and tightened.
- Attach the Hex Rod: Insert the hex rod into the designated slots, connecting the motor mechanism between the legs.
- Attach the Side Brackets: Fasten the side brackets to the top of the leg assemblies, which will support the desktop.
- Attach the Tabletop and Controller: Carefully place the desktop onto the assembled frame and secure it with screws. Mount the 2-button controller to the underside of the desktop in an accessible location.
- Connect the Power Adapter: Plug the power adapter into the desk's control box and then into a power outlet.
- Attach the Baffles: Install any cable management baffles or covers to organize wiring and complete the assembly.
Image: Overview of the VIVO Electric Standing Desk components, illustrating how the desk arrives in two separate boxes for the tabletop and desk frame.
Operating Instructions
Your VIVO Electric Standing Desk features an easy-to-use 2-button controller for height adjustment.
Height Adjustment
- To Raise: Press and hold the 'Up' arrow button on the controller. The desk will move upwards. Release the button at your desired height.
- To Lower: Press and hold the 'Down' arrow button on the controller. The desk will move downwards. Release the button at your desired height.
Image: A close-up view of the VIVO desk's intuitive 2-button push-button controller, used for adjusting the desk's height.
Feature Overview Video
Video: A feature overview of the VIVO DESK-KIT-B06B 60in x 24in Electric Desk, demonstrating its functionality and design.
Maintenance
- Cleaning: Wipe the desktop and frame with a damp cloth. Avoid using harsh chemicals or abrasive cleaners.
- Environmental Conditions: Avoid exposing the desk to extreme temperatures or excessive moisture.
- Regular Checks: Periodically check all screws and connections to ensure they remain tight and secure.
Troubleshooting
If you encounter any issues with your VIVO Electric Standing Desk, please refer to the following general advice:
- Desk Not Moving: Ensure all power cables are securely connected to the desk's control box and the wall outlet. Check if the outlet is functioning.
- Uneven Movement: Verify that the desk is placed on a level surface and that all assembly screws are tightened evenly.
- Unusual Noises: While the motor is designed for quiet operation, slight sounds during adjustment are normal. If loud or grinding noises occur, discontinue use and contact customer support.
For persistent problems or specific error codes, please contact VIVO Customer Support for assistance.
Specifications
| Attribute | Value |
|---|---|
| Brand | VIVO |
| Model Number | DESK-KIT-B06B |
| Product Dimensions | 23.6"D x 59"W x 28.7"H |
| Color | Black Top / Black Frame |
| Style | Full Desk Kit |
| Base Material | Alloy Steel |
| Top Material Type | Engineered Wood |
| Finish Type | Laminated |
| Special Feature | Adjustable Height |
| Maximum Weight Recommendation | 154 Pounds |
| Minimum Height | 28.6 Inches |
| Maximum Height | 48 Inches |
| Lifting Mechanism | Standard Two Button Controller |
| Item Weight | 52 Pounds |
Warranty and Support
This VIVO product comes with a 3-year manufacturer's warranty. This warranty covers parts and labor for a period of three years from the date of purchase.
For any questions, technical support, or warranty claims, please contact VIVO Customer Support. You can find contact information on the official VIVO website or through your purchase platform.
