Product Overview
This manual provides instructions for the installation and care of the Jaronx Interior Door Handle Cover. Designed to replace or cover the original door handle trim, this product addresses common issues such as sticky or worn-out handle surfaces. It is made from durable ABS+PC materials, offering an improved and long-lasting finish.
Image: Comparison of the door handle before and after installing the Jaronx cover, showing a cleaner, updated appearance.
Compatibility
The Jaronx Interior Door Handle Cover is specifically designed for certain BMW 3 Series and 4 Series models. Please verify your vehicle's model and year against the list below to ensure proper fitment. This product is for the Left Front + Right Front door handles.
Compatible BMW Models:
- BMW 3 Series (2012-2017): Models such as 320, 325, 328, 330, 335, 340. This includes F30 Sedan, F31 Touring, F34 GT Gran Turismo, and F80 M3 models.
- BMW 4 Series (2014-2017): Models such as 420, 428, 430, 435, 440. This includes F32 Coupe, F33 Convertible, F36 Gran Coupé, and F82/F83 M4 models.
Note: This product is not compatible with BMW 3 Series E90/E91 models.
Image: Visual guide indicating compatibility with BMW 3 & 4 Series (F30/F32) and incompatibility with 3 Series E90/E91 models.
Installation Instructions
The Jaronx door handle cover features a snap-on design for easy installation, typically taking only 3 minutes per handle. No cutting or splicing is required.
Recommended Preparation:
- Clean the existing door handle area thoroughly to remove any dirt or residue.
- It is recommended to apply anti-scratch stickers to the leather surface before installation to protect the original trim.
Step-by-Step Installation:
- Align to the Right Position: Carefully position the new handle cover over the existing door handle, ensuring it aligns correctly with the contours of the door panel.
- Push the Trim Cover into Position: Gently but firmly push the trim cover into place. The snap-on design will secure it.
- Installation is Completed: Once snapped into place, ensure the cover is flush and secure.
Image: Visual instructions demonstrating the three simple steps for installing the door handle cover.
Product Features and Benefits
- Advanced Material: Constructed from ABS+PC, providing a smoother and more solid feel compared to original ABS+TPO materials which can degrade with sun exposure.
- Enhanced Durability: Designed to maintain original car color and shine, offering anti-stain, anti-scratch, and anti-degumming properties.
- Direct Fit: Engineered for a precise and seamless fit over the existing door handle, covering sticky or worn areas without needing to replace the entire door panel.
Image: Detailed view highlighting the precise and seamless fit of the installed handle cover.
Image: Illustration of the handle cover's design to conceal sticky areas and its durable, anti-scratch surface.
Maintenance
To ensure the longevity and appearance of your Jaronx door handle covers, follow these maintenance guidelines:
- Cleaning: Use a soft, damp cloth with mild automotive interior cleaner to wipe down the handle covers. Avoid abrasive cleaners or solvents that could damage the finish.
- Protection: While the material is anti-scratch, avoid using sharp objects or excessive force on the handle surface.
- Sun Exposure: Although designed to resist aging from sun exposure, prolonged extreme heat or direct sunlight can still affect any material over time. Parking in shaded areas or using sun shades can help preserve the interior.
Troubleshooting
If you encounter any issues with your Jaronx door handle covers, refer to the following common solutions:
- Cover Not Fitting Snugly:
Ensure the handle cover is correctly aligned before applying pressure. Re-check the compatibility list to confirm it is the correct part for your specific vehicle model and door position (front left, front right).
- Cover Feels Loose After Installation:
Re-apply pressure evenly across the cover to ensure all snap-on points are fully engaged. If the issue persists, remove the cover and inspect for any obstructions or damage to the snap mechanisms on either the cover or the original handle.
- Sticky Residue Still Visible:
The cover is designed to conceal the sticky part. If residue is still visible, ensure the cover is fully seated and aligned. A thorough cleaning of the original handle before installation can also help.
Specifications
| Feature | Detail |
|---|---|
| Brand | Jaronx |
| Part Number | Compatible with BMW Door Handle Covers |
| Size | Left Front + Right Front |
| Color | Black |
| Style | Interior Handle for BMW 3 Series 4 Series |
| Finish | Powder Coated |
| Material | ABS + PC Plastic |
| Shape | Rectangular |
| Quantity per package | 1 (contains 2 pieces) |
| Special Features | Easy to install |
| Product Specific Uses | Interior Door Handle |
| Included Components | Door Handle Covers |
| Model Number | c6280d2d-30aa-44f0-a48c-584c52d774e7 |
| Package Dimensions | 29 x 11 x 6 cm; 90.72 g |
Warranty and Support
No specific warranty information is provided in the product details. For any product-related inquiries or support, please contact Jaronx customer service through the retailer where the product was purchased.