BoxWave ClearTouch Anti-Glare Screen Protector User Manual

1. Introduction

The BoxWave ClearTouch Anti-Glare Screen Protector is designed to protect your device's screen from scratches, dust, and fingerprints while reducing glare for improved visibility. This manual provides instructions for installation, usage, maintenance, and troubleshooting for your screen protector.

This screen protector is specifically engineered for compatibility with the Soundstream VR-720B.

This image displays the retail packaging for the BoxWave ClearTouch Anti-Glare Screen Protector, along with the screen protector itself, highlighting its anti-glare properties.

This image shows the Soundstream VR-720B car stereo unit, the device for which this screen protector is designed, featuring its large display.

2. Package Contents

Your BoxWave ClearTouch Anti-Glare Screen Protector package includes the following items:

• Two (2) ClearTouch Anti-Glare Screen Protectors
• One (1) Applicator Card
• One (1) Microfiber Cleaning Cloth
• One (1) Dust Removing Sticker

This image illustrates the contents of the package, including two ClearTouch Anti-Glare screen protectors and the essential installation accessories.

3. Setup and Installation

Follow these steps for a clean and bubble-free installation:

1. Clean Your Device Screen: Use the included microfiber cleaning cloth to thoroughly wipe down your device's screen. Ensure there are no dust particles, smudges, or fingerprints. For stubborn marks, a screen cleaner (not included) can be used.
2. Remove Dust: Use the dust-removing sticker to lift any remaining dust particles from the screen. Lightly press the sticker onto the screen and peel it off. Repeat as necessary until the screen is completely dust-free.
3. Align the Screen Protector: Carefully peel back a small portion of the protective film (usually labeled 'Step 1' or similar) from one end of the screen protector. Align the exposed edge of the screen protector with the corresponding edge of your device's screen. Pay close attention to cutouts for cameras, sensors, or buttons.
4. Apply Gradually: Once aligned, slowly lower the screen protector onto the device's screen, peeling off the rest of the protective film as you go. Use the applicator card to gently push out any air bubbles towards the edges as you apply.
5. Remove Remaining Bubbles: If bubbles remain, use the applicator card to push them towards the nearest edge. For persistent bubbles, you may gently lift a corner of the screen protector and reapply that section, pushing the air out.
6. Remove Top Film: Once the screen protector is fully applied and free of bubbles, carefully peel off the top protective film (usually labeled 'Step 2' or similar).

Tip: Perform installation in a dust-free environment, such as a bathroom after running a hot shower, to minimize airborne dust.

4. Operating and Features

The BoxWave ClearTouch Anti-Glare Screen Protector enhances your device's usability through several key features:

• Anti-Glare Surface: Disperses light to significantly reduce reflections and glare, making your screen more readable in bright conditions, both indoors and outdoors.
• Anti-Fingerprint Matte Film: The matte surface repels smudges, dust, and fingerprints, keeping your screen cleaner for longer and maintaining a smooth touch response.
• Paper-like Feel: Provides a unique tactile experience that mimics the feel of writing or drawing on paper, enhancing precision and comfort for stylus use.
• Precision Cut: Each screen protector is precision-cut to fit the exact dimensions of your Soundstream VR-720B screen, ensuring full accessibility to all functions and ports.
• Reusable: The special glueless adhesive allows for reinstallation if needed, without leaving sticky residue.

This image demonstrates the 'paper-like feel' of the ClearTouch Anti-Glare screen protector, showing a stylus interacting with a tablet screen, mimicking the tactile experience of writing on paper.

This image visually compares a screen protected by ClearTouch Anti-Glare (left, clean) with an unprotected screen (right, covered in fingerprints), illustrating the screen protector's effective anti-smudge and anti-fingerprint surface.

5. Maintenance and Care

To ensure the longevity and effectiveness of your screen protector, follow these maintenance guidelines:

• Cleaning: Use the included microfiber cleaning cloth to gently wipe the screen protector. For more stubborn smudges, lightly dampen the cloth with water or a screen-safe cleaning solution. Avoid harsh chemicals or abrasive materials.
• Avoid Sharp Objects: While the screen protector offers scratch resistance, extreme pressure or sharp objects can still damage it.
• Storage: If you remove the screen protector for any reason, store it on its original backing film in a clean, dust-free environment to preserve its adhesive properties.

6. Troubleshooting

Here are solutions to common issues you might encounter:

• Bubbles After Installation:
  • Small Bubbles: Many small bubbles will dissipate on their own within 24-48 hours.
  • Large Bubbles: Use the applicator card to gently push large bubbles towards the nearest edge. If a bubble is caused by a dust particle, carefully lift the nearest corner of the screen protector, use the dust-removing sticker to lift the particle, and then reapply.
• Dust Under Screen Protector:
  • Carefully lift the corner of the screen protector closest to the dust particle.
  • Use the dust-removing sticker to gently dab the dust particle off the screen protector's adhesive side and/or the device screen.
  • Slowly reapply the screen protector, pushing out any air bubbles with the applicator card.
• Misalignment:
  • If the screen protector is significantly misaligned, gently peel it off completely.
  • Clean the device screen and the screen protector's adhesive side (if necessary, with a lint-free cloth and distilled water, allowing it to air dry completely).
  • Reapply following the installation steps carefully.

7. Specifications

8. Warranty and Support

For specific warranty information and customer support, please refer to the official BoxWave website or contact their customer service directly. Details regarding product guarantees, returns, and technical assistance are typically provided through these channels.

Please retain your proof of purchase for any warranty claims.