ReplacementScrews Wall Mount Screws Instruction Manual

1. Introduction

This manual provides detailed instructions for the proper use and installation of ReplacementScrews wall mount screws, specifically designed for compatibility with your Samsung UN43N5020 (UN43N5020AFXZA) television. Adhering to these instructions will ensure a secure and reliable wall mounting installation.

2. Product Overview and Components

The ReplacementScrews kit includes all necessary hardware for mounting your compatible Samsung TV to a VESA-compliant wall mount. Please verify all components are present before beginning installation.

Figure 1: Complete set of ReplacementScrews wall mount hardware, including screws, washers, and spacers.

Included Components:

• Four (4) Metric Screws: Specifically sized for Samsung UN43N5020AF (UN43N5020AFXZA) TV models. These screws feature black oxide plating for corrosion resistance and a professional appearance.
• Four (4) Split Lock Washers: These washers provide tension against the mounting surface and screw, helping to prevent loosening due to vibrations.
• Four (4) Flat Washers: Distribute the load of the fastener, preventing damage to the TV's mounting holes and ensuring a secure fit.
• Eight (8) Nylon Spacers: Offer additional length configurations and create space for cable management behind the TV.

Figure 2: Individual components of the screw kit, laid out for identification.

3. Installation Instructions

Before proceeding, always consult your television's instruction manual and your wall mount's instruction manual for specific guidance and safety warnings. Ensure you have the correct tools for installation.

1. Identify Mounting Holes: Locate the VESA mounting holes on the back of your Samsung UN43N5020 TV.
2. Select Spacers (if needed): Determine if spacers are required to achieve the correct screw length or to create space for cables. The kit includes two sizes of nylon spacers for flexibility.
3. Assemble Hardware: For each mounting point, place a flat washer onto a screw, followed by a split lock washer. If using spacers, place them after the washers.


Figure 3: Example of a screw assembled with washers and a spacer.

4. Attach Mount Brackets: Align the TV mount brackets with the VESA mounting holes on the TV. Insert the assembled screws through the mount brackets and into the TV's mounting holes.
5. Secure Screws: Hand-tighten each screw initially to ensure proper alignment. Then, use a screwdriver to tighten them securely. Do not overtighten, as this can damage the TV or the screws. The split lock washers will provide resistance against loosening.
6. Final Check: Once all screws are tightened, gently attempt to move the mount brackets to ensure they are firmly secured to the TV.

4. Important Considerations

• Compatibility: These screws are specifically designed for the Samsung UN43N5020 (UN43N5020AFXZA) TV model. Using them with incompatible TVs may result in an insecure installation or damage.
• VESA Standard: The metric screws are compatible with the industry-standard M8 VESA mounting bracket pattern. Ensure your wall mount also adheres to VESA standards.
• Screw Length: The included spacers allow for adjustment of the effective screw length. Always ensure the screw penetrates sufficiently into the TV's mounting hole without bottoming out or being too short.
• Safety: Always ensure the wall mount itself is properly installed into wall studs or appropriate anchors capable of supporting the weight of your TV. If unsure, consult a professional installer.

Figure 4: Close-up of the black oxide plated screws and spacers.

5. Specifications

6. Care and Storage

Store the screws and components in a dry environment to prevent corrosion. Keep out of reach of children. If any components are damaged or missing, do not proceed with installation.

7. Support

For further assistance or inquiries regarding this product, please contact ReplacementScrews customer support through the retailer's platform or the official ReplacementScrews website. Always refer to your TV's and wall mount's manuals for specific installation requirements.