1. Introduction
The Rubbermaid Reveal Power Scrubber is engineered to provide powerful and efficient cleaning for various household surfaces. Its oscillating brush head delivers rapid scrubbing action, significantly reducing the effort and time required for cleaning tasks compared to manual scrubbing. This device is ideal for tackling grime in hard-to-reach areas and is designed for durability with its water-resistant construction.
Key Features:
- Intense Cleaning Power: Oscillating head scrubs 60 times per second.
- Faster Cleaning: Cleans up to 2X faster than manual scrubbing.
- Water Resistant: Robust design for reliability in wet conditions.
- Ergonomic Grip: Rubberized molding for comfortable handling.
- Versatile Use: Suitable for bathrooms, kitchens, outdoor areas, and more.
Package Contents:
- 1 x Powered Handle
- 1 x Multi-Purpose Head
- 1 x Grout Cleaning Head
- 4 x AA Batteries
Image: The Rubbermaid Reveal Power Scrubber handle with the multi-purpose brush head attached, and the grout cleaning head shown separately.
2. Setup
Battery Installation:
- Locate the battery compartment at the base of the handle.
- Twist the battery cap counter-clockwise to open.
- Insert four (4) AA batteries, ensuring correct polarity (+/-) as indicated inside the compartment.
- Replace the battery cap and twist clockwise to secure.
Attaching Brush Heads:
- Align the desired brush head (Multi-Purpose or Grout Cleaning) with the connection point on the scrubber handle.
- Push the brush head onto the handle and twist clockwise until it clicks securely into place.
- To remove a brush head, twist it counter-clockwise and pull it off.
Image: Diagram on the back of the product packaging illustrating the process of removing and attaching brush heads by twisting.
3. Operating Instructions
Powering On/Off:
- Press the power button located on the handle to turn the scrubber ON.
- Press the power button again to turn the scrubber OFF.
Cleaning Modes:
The scrubber features two cleaning modes: pulse and continuous. The default mode is continuous when powered on. To switch between modes, press the power button briefly while the unit is running.
Usage Guidelines:
- Apply light pressure while scrubbing; the oscillating action does most of the work.
- For best results, use with appropriate cleaning solutions for the surface being cleaned.
- The unit is water-resistant, but avoid submerging the entire handle in water.
Common Applications:
- Bathroom: Faucets, drains, sinks, tile, grout, showers, tubs.
- Kitchen: Appliances, counters, stove-tops, microwaves, cutlery.
- Outdoor: Patio grills, furniture, car trim, tires, wheels, golf clubs and balls.
- Other: Shoes, window sills, hard-to-reach crevices.
Image: A hand using the Power Scrubber to clean around a sink faucet, demonstrating its ability to reach tight spaces.
Image: The Power Scrubber's oscillating head actively cleaning grout lines on a tiled surface, highlighting its scrubbing power.
Image: A hand using the Power Scrubber to clean a white sneaker over a sink, illustrating its use for restoring footwear.
4. Maintenance
Cleaning the Scrubber:
- After each use, rinse the brush head thoroughly under running water to remove any debris or cleaning solution residue.
- Wipe the handle with a damp cloth. Do not immerse the handle in water.
- Allow all parts to air dry completely before storing.
Replacing Brush Heads:
Brush heads may wear down over time depending on usage and the surfaces cleaned. Replace brush heads when bristles show signs of wear or become less effective. Replacement heads are available separately.
Storage:
Store the Rubbermaid Reveal Power Scrubber in a cool, dry place away from direct sunlight and extreme temperatures. Remove batteries if the unit will not be used for an extended period to prevent leakage.
5. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Scrubber does not turn on. | Batteries are dead or incorrectly installed. | Check battery polarity. Replace with new AA batteries. |
| Brush head not oscillating effectively. | Brush head is loose or worn. | Ensure brush head is securely twisted onto the handle. Replace brush head if worn. |
| Reduced cleaning performance. | Brush head is dirty or worn. | Clean the brush head. Replace if bristles are flattened or damaged. |
| Unusual noise during operation. | Debris caught in the brush mechanism or internal issue. | Remove brush head and check for any trapped debris. If noise persists, contact customer support. |
6. Specifications
| Attribute | Detail |
|---|---|
| Brand | Rubbermaid |
| Model Number | 2057486 |
| Power Source | 4 x AA Batteries (Included) |
| Oscillation Speed | 60 scrubs per second |
| Dimensions (L x W x H) | 6.97" x 1.73" x 12.68" |
| Item Weight | 10.2 ounces |
| Material | Plastic |
| Water Resistance | Water resistant |
| UPC | 071691490135 |
7. Warranty and Support
Rubbermaid products are manufactured to high-quality standards. For specific warranty information, please refer to the packaging or contact Rubbermaid customer service directly. Keep your purchase receipt as proof of purchase for any warranty claims.
For further assistance, product inquiries, or to purchase replacement parts, please visit the official Rubbermaid website or contact their customer support line.
