Furrion F2AA001ABBK

Furrion Universal-Outdoor Full Motion TV Wall Mount Bracket

Model: F2AA001ABBK

1. Introduction

This manual provides comprehensive instructions for the safe and effective installation, operation, and maintenance of your Furrion Universal-Outdoor Full Motion TV Wall Mount Bracket (Model F2AA001ABBK). Please read this manual thoroughly before installation and retain it for future reference.

2. Safety Information

WARNING: Failure to read and follow all instructions may result in personal injury, property damage, or voiding of your warranty. If you do not understand these instructions or have doubts about the safety of the installation, please contact Furrion customer service or a qualified installer.

  • Weight Capacity: Do not exceed the maximum weight capacity of 132 lbs (60 kg). Ensure your TV's weight is within this limit.
  • VESA Compatibility: This mount supports VESA patterns up to 400x400 mm. Verify your TV's VESA pattern before installation.
  • Wall Structure: The mounting surface must be capable of supporting the combined weight of the mount and your TV. For wood stud installation, ensure screws are anchored into the center of solid wood studs. For concrete or brick walls, use appropriate anchors (not always included, consult a professional).
  • Outdoor Use: This mount is designed for outdoor use and features a high-quality powder-coated finish for weather resistance. However, ensure proper sealing and protection of electrical connections for the TV itself.
  • Tools: Use appropriate tools for installation. Always wear safety glasses.

3. Package Contents

Verify that all components are present and undamaged before beginning installation. If any parts are missing or defective, contact Furrion customer service.

  • TV Wall Mount Assembly
  • Mounting Hardware (screws, washers, spacers)
  • Cable Management Clip
  • Instruction Manual
All components of the Furrion TV wall mount laid out
Figure 1: All components included in the package, including the main mount assembly, various screws, washers, spacers, and cable management clips.
Close-up of mounting straps and hardware kits
Figure 2: Detailed view of the mounting straps and various hardware kits for different TV and wall types.

4. Specifications

FeatureDetail
Product Dimensions26 x 15 x 4 inches
Item Weight17 pounds
Model NumberF2AA001ABBK
Mounting TypeWall Mount
Movement TypeArticulating (Full-Motion)
BrandFurrion
MaterialMetal
ColorBlack
Compatible DevicesTelevision
Maximum Tilt Angle3° up and 15° down
Maximum Load Capacity132 LBS (60 kg)
VESA CompatibilityUp to 400x400 mm
Diagram showing dimensions and tilt angles of the TV mount
Figure 3: Key dimensions and tilt capabilities of the Furrion Full Motion TV Wall Mount.

5. Setup and Installation

Proper installation is crucial for the safety and performance of your TV mount. Follow these steps carefully.

5.1 Pre-Installation Checklist

  • Ensure you have all necessary tools (drill, stud finder, level, etc.).
  • Verify your TV's weight and VESA pattern are compatible with the mount.
  • Identify the type of wall you are mounting to (wood stud, concrete, brick).
  • Locate the exact position for your TV, considering viewing angles and power/cable access.

5.2 Attaching Brackets to Your TV

  1. Carefully place your TV face down on a soft, clean surface to prevent screen damage.
  2. Identify the VESA mounting holes on the back of your TV.
  3. Select the appropriate screws, washers, and spacers from the provided hardware kit that fit your TV's mounting holes.
  4. Attach the vertical TV brackets to the back of your TV using the selected hardware. Ensure they are securely fastened but do not overtighten.
Front view of the TV wall mount bracket
Figure 4: Front view of the mount, showing the VESA plate where the TV brackets attach.

5.3 Mounting the Wall Plate

  1. Using a stud finder, locate the center of two adjacent wood studs for wood stud installation, or mark drill points for concrete/brick.
  2. Hold the wall plate against the wall at your desired height and use the built-in leveler to ensure it is perfectly horizontal. Mark the drill holes.
  3. Drill pilot holes at the marked locations. The size of the drill bit will depend on your wall type and chosen hardware.
  4. Secure the wall plate to the wall using the appropriate lag bolts and washers. Tighten all bolts firmly.
Rear view of the TV wall mount bracket
Figure 5: Rear view of the mount, illustrating the wall plate and articulating arms.

5.4 Hanging Your TV

  1. With assistance, carefully lift the TV and align the brackets on the back of the TV with the arms of the wall mount.
  2. Hook the TV brackets onto the mount arms. Ensure the TV is securely seated.
  3. Engage any safety locking mechanisms on the mount to prevent accidental dislodging of the TV.
TV mounted on the wall with the full-motion bracket extended
Figure 6: An example of the TV mounted on the wall, demonstrating the extended position of the full-motion bracket.

6. Operating Instructions

The Furrion Full Motion TV Wall Mount offers versatile viewing options.

6.1 Adjusting Tilt

The tilting arms can be adjusted 3° up and 15° down. Loosen the tilt adjustment knobs (if present) on the TV brackets, set your desired angle, and then securely tighten the knobs to lock the tilt in place.

6.2 Adjusting Swivel and Extension

The full-motion capabilities allow you to swivel, extend, or retract the TV. Gently pull the TV away from the wall to extend the arms. You can then swivel the TV left or right to achieve your optimal viewing angle. Push the TV back towards the wall to retract the arms when not in use.

Angled view of the full-motion TV wall mount
Figure 7: The full-motion mount in an extended and angled position, illustrating its flexibility.

7. Maintenance

Regular maintenance ensures the longevity and safe operation of your TV mount.

  • Cleaning: Wipe the mount with a soft, damp cloth. Avoid abrasive cleaners or solvents that could damage the powder-coated finish.
  • Periodic Checks: Periodically check all screws and bolts to ensure they remain tight. Re-tighten if necessary.
  • Moving Parts: Ensure the articulating arms move smoothly. If movement becomes stiff, apply a small amount of silicone-based lubricant to the joints.

8. Troubleshooting

If you encounter issues with your TV mount, refer to the following common problems and solutions:

  • TV is not level: Use the built-in leveler during installation to ensure the wall plate is level. Some mounts allow for minor post-installation leveling adjustments on the TV brackets. Consult the detailed manual for specific adjustment points.
  • Mount feels unstable: Re-check all mounting bolts and screws for tightness. Ensure the mount is securely fastened to appropriate wall studs or concrete anchors. Do not exceed the maximum weight capacity.
  • Difficulty moving the TV: Check for any tightened adjustment knobs that might be restricting movement. Apply lubricant to moving joints if they are stiff. Ensure cables are not snagging.

9. Warranty and Support

This Furrion TV Wall Mount comes with a 12-month warranty. For warranty claims, technical support, or any questions regarding your product, please refer to the contact information provided in your product packaging or on the official Furrion website.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.