Introduction
The Bluedio HS Neckband Portable Bluetooth Speaker is designed to provide a personal audio experience while keeping your hands and ears free. This wearable speaker offers multiple connectivity options including Bluetooth 5.0, FM radio, and Micro SD card playback, making it versatile for various activities such as cooking, outdoor sports, or hands-free phone calls. Its ergonomic design ensures comfortable wear for extended periods.
Image: The Bluedio HS Neckband Portable Bluetooth Speaker, showcasing its ergonomic design.
Setup
1. Charging the Speaker
Before first use, fully charge the Bluedio HS speaker. Connect the supplied Type-C charging cable to the charging port on the speaker and the other end to a compatible USB power source. The LED indicator will show charging status. A full charge takes approximately 2.5 hours.
Image: Diagram illustrating the location of the Charging Connector, SD card slot, and control buttons on the Bluedio HS speaker.
2. Bluetooth Pairing
- Ensure the speaker is charged and powered off.
- Press and hold the multifunction button (power button) until the LED indicator flashes blue and red, indicating pairing mode.
- On your smartphone or Bluetooth-enabled device, enable Bluetooth and search for available devices.
- Select "Bluedio HS" from the list of devices.
- Once connected, the LED indicator will show a steady blue light or flash slowly.
3. Inserting a Micro SD Card
The Bluedio HS supports Micro SD cards up to 32GB for direct music playback. Locate the SD card slot on the speaker. Gently insert the Micro SD card with the gold contacts facing down until it clicks into place.
Image: Close-up view of the Bluedio HS speaker highlighting the Micro SD card reading function and slot.
Operating Instructions
Power On/Off
- Power On: Press and hold the multifunction button for approximately 3 seconds.
- Power Off: Press and hold the multifunction button for approximately 3 seconds.
Music Playback
- Play/Pause: Short press the multifunction button.
- Next Track: Short press the "Volume+" button.
- Previous Track: Short press the "Volume-" button.
- Volume Up: Long press the "Volume+" button.
- Volume Down: Long press the "Volume-" button.
Image: A person wearing the Bluedio HS speaker, illustrating the "Theater Surround Sound" experience.
Call Functionality
- Answer Call: Short press the multifunction button.
- End Call: Short press the multifunction button during a call.
- Reject Call: Long press the multifunction button when an incoming call rings.
- Redial Last Number: Double-press the multifunction button.
Image: A user making a hands-free call with the Bluedio HS speaker, emphasizing its "Hand Free & Ear Free" technology.
Mode Switching (Bluetooth/FM/SD Card)
Short press the "Mode switching" button (M button) to cycle through Bluetooth, FM radio, and Micro SD card playback modes.
Image: A person enjoying music with the Bluedio HS speaker, highlighting its FM radio function.
Image: Visual representation of the Bluedio HS speaker's Bluetooth 5.0 capability and support for WAV and MP3 lossless sound quality.
Image: A woman wearing the Bluedio HS speaker, demonstrating its comfortable and wearable design for outdoor activities.
Image: A person playing a video game while wearing the Bluedio HS speaker, illustrating its use for accurate audio positioning in gaming.
Maintenance
- Cleaning: Use a soft, dry cloth to clean the speaker. Do not use abrasive cleaners or solvents.
- Storage: Store the speaker in a cool, dry place away from extreme temperatures and direct sunlight.
- Battery Care: To prolong battery life, avoid fully discharging the battery frequently. Charge the speaker regularly, even if not in use for extended periods.
- Water Resistance: The Bluedio HS is NOT waterproof. Avoid exposure to water or high humidity.
Troubleshooting
- No Power/Cannot Turn On:
- Ensure the speaker is fully charged. Connect the charging cable and check if the LED indicator lights up.
- Cannot Pair with Bluetooth Device:
- Ensure the speaker is in pairing mode (LED flashing blue and red).
- Make sure Bluetooth is enabled on your device and it is within the effective range (up to 60 meters).
- Delete "Bluedio HS" from your device's Bluetooth list and try pairing again.
- Restart both the speaker and your Bluetooth device.
- No Sound/Low Sound:
- Adjust the volume on both the speaker and your connected device.
- Ensure the speaker is correctly connected via Bluetooth, or that the Micro SD card is properly inserted and contains playable audio files.
- If using FM radio, ensure you are in an area with good signal reception.
- Note that sound quality may vary when not worn, as the speaker is designed for optimal performance when worn around the neck.
- Buttons Not Responding:
- Try restarting the speaker. If a specific button consistently fails, it may indicate a hardware issue.
- Speaker Falls Off Neck Easily:
- The design is lightweight and ergonomic. For active use, ensure it is positioned securely. Be mindful during sudden movements to prevent it from falling.
Specifications
| Feature | Detail |
|---|---|
| Model Name | HS |
| Brand | Bluedio |
| Speaker Type | Outdoor, Neckband Wearable |
| Connectivity Technology | Bluetooth, FM, Micro SD Card |
| Battery Life | Up to 5 Hours |
| Charging Time | Approx. 2.5 Hours |
| Product Dimensions | 6.92"D x 9.13"W x 0.98"H |
| Item Weight | 1.12 ounces (approx. 0.07 Pounds) |
| Maximum Range | 60 Meters |
| Speaker Maximum Output Power | 1.5 Watts |
| Is Waterproof | No |
| Included Components | Bluedio HS Speaker, Charge Cable, User Manual |
Warranty and Support
The Bluedio HS Neckband Portable Bluetooth Speaker comes with a Limited Warranty. For specific warranty terms and conditions, please refer to the documentation included with your purchase or contact the manufacturer directly.
For technical support, troubleshooting assistance, or inquiries regarding your product, please contact Bluedio customer service through their official website or the retailer from whom you purchased the product.
Please retain your purchase receipt for warranty claims.