1. Introduction
Thank you for choosing the HOFSTEIN Barbengo 4-Light Suspension Lamp. This fixture combines natural wood and black metal to create a vintage and industrial aesthetic, perfect for enhancing the ambiance of your living room, dining area, or kitchen. This manual provides essential information for safe installation, operation, and maintenance of your new lighting fixture. Please read these instructions carefully before installation and retain them for future reference.
Image 1: The HOFSTEIN Barbengo 4-Light Suspension Lamp featuring a wooden beam and four metal cage shades.
2. Safety Instructions
WARNING: To avoid electric shock, always disconnect power at the main circuit breaker before installing, servicing, or cleaning this fixture.
- This product must be installed in accordance with the applicable installation code by a person familiar with the construction and operation of the product and the hazards involved.
- Ensure the supply voltage is correct for this fixture (220-240V for EU regions).
- Do not exceed the maximum wattage specified for the bulbs.
- Handle the lamp with care. Avoid dropping or subjecting it to strong impacts.
- Do not modify the fixture in any way. Any modifications may void the warranty and create safety hazards.
- This fixture is designed for indoor use only. Do not expose to moisture or extreme temperatures.
3. Package Contents
Carefully unpack your fixture and check that all parts are included. Keep the packaging materials until you are sure all parts are present and the fixture is working correctly.
- 1 x Wooden Beam Fixture with integrated wiring
- 4 x Metal Cage Lampshades
- 1 x Ceiling Mounting Plate
- Mounting Hardware (screws, wall anchors, wire connectors)
- 1 x Instruction Manual
Note: E27 bulbs are not included and must be purchased separately.
4. Setup and Installation
Professional installation is recommended. Ensure you have the necessary tools (screwdriver, drill, wire strippers, ladder) before beginning.
- Disconnect Power: Turn off the electricity at the main circuit breaker to the junction box where the fixture will be installed.
- Prepare Mounting Plate: Attach the ceiling mounting plate to the junction box using the provided screws. Ensure it is securely fastened.
- Connect Wires: Carefully connect the fixture's wires to the household electrical wires. Match the colors:
- Black (Live) to Black (Live)
- White (Neutral) to White (Neutral)
- Green or Bare Copper (Ground) to Green or Bare Copper (Ground)
- Attach Fixture to Ceiling: Carefully lift the fixture and align the holes in the fixture's canopy with the screws on the mounting plate. Secure the fixture to the mounting plate with the decorative nuts or screws provided.
- Adjust Cable Length: The cables for each lamp can be individually adjusted. Wrap the excess cable around the wooden beam to achieve your desired hanging height for each light. The total height can be adjusted from a minimum of 100 cm to a maximum of 185 cm.
- Install Bulbs: Screw E27 bulbs into each of the four sockets. Ensure the bulbs are fully seated.
- Restore Power: Turn the electricity back on at the main circuit breaker.
Image 2: Diagram showing the dimensions of the lamp and its components, including the adjustable cable length.
5. Operating Instructions
The HOFSTEIN Barbengo suspension lamp is operated via a standard wall switch connected to the fixture's electrical circuit. Simply toggle the wall switch to turn the lights on or off.
Adjusting Lamp Height
To adjust the height of individual lamps, carefully unwrap or re-wrap the cables around the wooden beam. Ensure the power is off before making adjustments to avoid accidental contact with electrical components.
Image 3: The lamp installed over a table, demonstrating how the cables can be wrapped around the wooden beam for height adjustment.
6. Maintenance
Cleaning
Always disconnect power before cleaning. To clean the fixture, wipe it with a soft, dry cloth. Do not use abrasive cleaners, solvents, or polishes as they may damage the finish.
Bulb Replacement
Ensure the power is disconnected at the circuit breaker before replacing bulbs. Allow bulbs to cool completely before touching them. Unscrew the old E27 bulb and screw in a new one, ensuring it is securely seated. Do not exceed the maximum wattage for the fixture.
7. Troubleshooting
If you encounter issues with your lamp, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on | No power to the fixture, faulty bulb, loose wiring connection | Check circuit breaker. Replace bulb. Verify wiring connections (ensure power is off). |
| Light flickers | Loose bulb, incompatible bulb, loose wiring | Tighten bulb. Ensure bulb is compatible with fixture. Check wiring connections (ensure power is off). |
| Fixture is unstable | Mounting screws are loose, improper installation | Ensure mounting plate and fixture are securely fastened to the ceiling. Re-install if necessary. |
If these solutions do not resolve the issue, please contact customer support.
8. Specifications
- Brand: HOFSTEIN
- Model Number: H3358719
- Style: Vintage, Industrial
- Color: Black / Brown
- Material: Wood, Metal, Alloy Steel
- Number of Bulbs: 4
- Cap Type: E27
- Max Wattage: 60 Watts total (LED recommended for energy efficiency)
- Luminous Flux: 2000 Lumen (total)
- Adjustable Height: Minimum 100 cm - Maximum 185 cm
- Wooden Beam Dimensions: Approximately 70 cm (length) x 5 cm (width)
- Shade Diameter: Approximately 14 cm
- Usage: Indoor Only
- Special Features: Energy-efficient (with LED bulbs), Adjustable cables
9. Warranty and Support
Warranty Information
This HOFSTEIN product is covered by a standard manufacturer's warranty against defects in materials and workmanship. Please refer to your purchase documentation or contact the retailer for specific warranty terms and duration.
Customer Support
For technical assistance, replacement parts, or any questions regarding your HOFSTEIN Barbengo lamp, please contact HOFSTEIN customer support through their official website or the retailer from whom you purchased the product. Please have your model number (H3358719) and proof of purchase ready.