1. Introduction
This manual provides essential information for the safe and efficient use of your Feit Electric G4 LED Bulbs. These dimmable 3000K warm white LED bulbs are designed as energy-saving replacements for 10-watt incandescent halogen bulbs, producing 90 lumens while consuming only 2 watts of electricity. They are suitable for various residential and commercial applications, including desk lamps, signs, and under-cabinet lighting.
Image: Six Feit Electric G4 LED Bulbs, showcasing the compact design and bi-pin base.
2. Safety Information
Please read and understand all safety instructions before installing or using these LED bulbs. Failure to follow these instructions may result in electric shock, fire, or other hazards.
- Risk of Electric Shock: Always turn off the power to the fixture and allow the old bulb to cool before replacing.
- Risk of Fire: Do not exceed the maximum wattage rating of the fixture. Ensure the bulb is compatible with the fixture's voltage (12 Volts).
- Dimmability: These bulbs are dimmable. Ensure your dimmer switch is compatible with LED technology for optimal performance and to prevent flickering.
- Indoor/Outdoor Use: These bulbs are rated for outdoor usage, but ensure the fixture itself is suitable for the environment and properly sealed to protect the bulb from direct water exposure.
- Handling: Avoid touching the glass part of the bulb directly with bare hands, as oils can reduce bulb life. Use a cloth or gloves if necessary.
- Disposal: Dispose of bulbs according to local regulations. These bulbs are 100% mercury-free.
3. Package Contents
Verify that all items are present in the package:
- 6 x Feit Electric G4 LED Light Bulbs
Image: Retail packaging for Feit Electric G4 LED Bulbs, showing product details and branding.
4. Setup and Installation
Follow these steps to install your Feit Electric G4 LED Bulbs:
- Turn Off Power: Before attempting any installation, ensure the power supply to the light fixture is completely turned off at the circuit breaker or fuse box.
- Remove Old Bulb: Carefully remove the existing G4 halogen bulb from the fixture. Allow it to cool if it was recently in use.
- Insert New LED Bulb: Align the two pins of the Feit Electric G4 LED bulb with the holes in the G4 socket. Gently push the bulb into the socket until it is fully seated. Do not force the bulb.
- Restore Power: Once the bulb is securely installed, restore power to the fixture.
- Test: Turn on the light switch to confirm the bulb is working correctly.
Image: Detailed view of a single Feit Electric G4 LED Bulb, illustrating its compact dimensions (0.4 inches width, 1.6 inches height) and G4 bi-pin base.
5. Operating Instructions
These Feit Electric G4 LED bulbs are designed for simple operation:
- Standard Operation: Once installed, the bulb will illuminate when power is supplied to the fixture via a standard light switch.
- Dimmable Functionality: If connected to a compatible LED dimmer switch, you can adjust the brightness of the bulb. Ensure your dimmer is designed for LED loads to prevent flickering or poor performance.
- Instant On: These LED bulbs provide instant full brightness without any warm-up time.
Image: A desk lamp casting a warm, bright light, demonstrating the 3000K warm white illumination provided by the Feit Electric G4 LED Bulb.
Image: Collage showing various applications for the G4 LED bulbs, including signs, under-cabinet lighting, sewing machine lights, and desk lamps, highlighting their versatility.
6. Maintenance
Feit Electric G4 LED bulbs are designed for long life and require minimal maintenance.
- Cleaning: Ensure the power is off and the bulb is cool before cleaning. Wipe the bulb gently with a soft, dry cloth. Do not use liquid cleaners or abrasive materials.
- Replacement: These bulbs have an average life of 10,000 hours. Replace the bulb when its light output significantly diminishes or it ceases to function.
Image: Infographic detailing the benefits and features of the Feit Electric G4 LED Bulb, including long lasting (10,000 hours), economical, 80 CRI, bright white light, no flicker, easy to install, and dimmable light.
7. Troubleshooting
If you encounter issues with your Feit Electric G4 LED bulbs, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Bulb does not light up. | No power to fixture, loose connection, faulty bulb. | Check circuit breaker. Ensure bulb is fully seated in socket. Test with a known working bulb. |
| Bulb flickers or hums. | Incompatible dimmer switch, unstable voltage, loose connection. | Ensure dimmer is LED compatible. Check voltage supply. Re-seat the bulb. |
| Light output is too low or too high. | Incorrect bulb for fixture, dimmer setting. | Verify bulb specifications match fixture requirements. Adjust dimmer. |
Image: A nightstand scene with a light box displaying "EVERY MINUTE COUNTS", demonstrating the flicker-free operation of the Feit Electric G4 LED Bulbs, ideal for specialty applications.
8. Specifications
Detailed technical specifications for the Feit Electric G4 LED Bulb:
| Specification | Value |
|---|---|
| Brand | Feit Electric |
| Model Number | BP10G4/830/LED/6 |
| Light Type | LED |
| Bulb Base | G4 |
| Wattage | 2 Watts |
| Incandescent Equivalent Wattage | 10 Watts |
| Brightness | 90 Lumens |
| Color Temperature | 3000 Kelvin (Warm White) |
| Voltage | 12 Volts |
| Dimmable | Yes |
| Average Life | 10,000 Hours / 9 Years |
| Material | Plastic |
| Product Dimensions | 0.4"W x 1.6"H |
| Mercury Free | Yes |
| Certifications | FCC Compliant, UL/CUL Listed, CEC Certified |
| GTIN | 20017801754616 |
Image: A hand holding a Feit Electric G4 LED Bulb, with text emphasizing its long-lasting nature (10,000 life hours) and energy efficiency (estimated $0.24 per year energy cost).
9. Warranty and Support
Feit Electric products are manufactured to the highest quality standards. For warranty information or technical support, please contact Feit Electric directly.
Contact Information:
- Visit the official Feit Electric website for the most current support information.
- Refer to the product packaging for specific warranty details and customer service contacts.
Image: The product box for Feit Electric G4 LED Bulbs, displaying branding, product details, and a barcode with GTIN 20017801754616.
