LED.APP 2-Pack USB Rechargeable COB Work Lights Instruction Manual

1. Product Overview

The LED.APP 2-Pack USB Rechargeable COB Work Lights are versatile lighting tools designed for various applications including car repair, home lighting, workshop tasks, and emergency situations. Featuring advanced COB (Chip On Board) technology, these lights provide bright, energy-efficient illumination. Each unit includes a strong magnetic base and a 360° rotating head for flexible positioning.

Image 1: LED.APP COB Work Lights with USB charging cables.

2. Key Features

• Ultra Bright COB Technology: Provides wide, bright flood illumination with high energy efficiency.
• 5 Working Modes: High Brightness, Medium Brightness, Front Light, Red Warning, and Strobe Red.
• USB Rechargeable: Built-in rechargeable battery with included USB cable for convenient charging.
• Strong Magnetic Base: Allows for hands-free attachment to metallic surfaces.
• 360° Rotary Design: The light head can rotate 360 degrees for multi-angle illumination.
• Folding Design: Compact and portable for easy storage and transport.
• Swivel Hook: Integrated hook for hanging the light.
• Durable Construction: Made from aluminum and rubber for resilience.

Image 2: Detailed view of the work light's components and features.

3. Setup and Charging

3.1 Initial Charge

Before first use, fully charge the work light. The device comes with a built-in Lithium Ion battery.

3.2 Charging Procedure

1. Locate the Micro-USB (Type A) charging port on the base of the work light.
2. Connect the included USB cable to the charging port on the work light.
3. Plug the other end of the USB cable into a compatible USB power source (e.g., computer, power bank, USB wall adapter, car charger).
4. A red indicator light will display during charging. This light will turn green when the battery is fully charged.

Image 3: USB charging options for the work light.

3.3 Positioning the Work Light

• Magnetic Base: Utilize the strong magnetic base to attach the light to any ferrous metal surface for hands-free operation.
• 360° Rotation: Adjust the light head to direct illumination precisely where needed.
• Swivel Hook: Use the integrated swivel hook to hang the light from non-magnetic surfaces.

Image 4: The 360° rotating design for versatile lighting.

4. Operating Instructions

4.1 Power On/Off and Mode Selection

The work light features a single power switch to cycle through its five lighting modes:

1. Press the power switch once for High Brightness (COB light).
2. Press the power switch a second time for Medium Brightness (COB light).
3. Press the power switch a third time for Front Light (LED dome light).
4. To activate Red Warning mode, press and hold the power switch for 3 seconds.
5. While in Red Warning mode, press the switch once for Strobe Red (S-O-S blink).
6. To turn off the light from any mode, continue pressing the power switch until the light turns off, or press and hold the switch for 3 seconds.

Image 5: Visual representation of the 5 working modes.

5. Maintenance and Care

• Cleaning: Wipe the light with a soft, damp cloth. Do not use abrasive cleaners or solvents.
• Storage: Store the work light in a cool, dry place away from direct sunlight when not in use.
• Battery Care: To prolong battery life, avoid fully discharging the battery frequently. Recharge the light regularly, even if not in constant use.
• Water Resistance: The product is rated IP44, meaning it is protected from splashing water from any direction. It is not designed for submersion.

Image 6: The work light demonstrating its IP44 water resistance.

6. Troubleshooting

• Light not turning on: Ensure the battery is charged. Connect the light to a USB power source and check if the charging indicator light appears.
• Battery not holding charge: Ensure the USB cable and power source are functioning correctly. Try a different cable or adapter. If the issue persists, the battery may need replacement (contact customer support).
• Light modes not cycling: Press the power switch firmly. If the switch is unresponsive, contact customer support.

7. Specifications

8. Warranty and Support

For warranty information or technical support, please refer to the product packaging or contact LED.APP customer service directly. Keep your purchase receipt for any warranty claims.