Introduction
This manual provides instructions for the Feit Electric A1960CL/927CA/FIL/AG Smart Wi-Fi LED Bulb. This bulb is designed to integrate with your home's 2.4 GHz Wi-Fi network, offering remote control and voice command capabilities through the Feit Electric app, Alexa, or Google Assistant. It features a traditional filament design with modern LED technology, providing 2700K soft white light equivalent to a 60-watt incandescent bulb while consuming only 8.8 watts.
Image: Feit Electric Smart Wi-Fi LED Bulb, showing the product packaging and the bulb itself. The packaging highlights Wi-Fi connectivity, Alexa and Google Assistant compatibility, and energy efficiency.
Setup Instructions
Follow these steps to set up your Feit Electric Smart Wi-Fi LED Bulb:
- Download the Feit Electric App: Search for "Feit Electric" in your smartphone's app store (available for Android and iOS) and install the application.
- Install the Bulb: Screw the smart bulb into a standard E26 medium base light socket. Ensure the fixture is powered off before installation.
- Power On and Initiate Pairing: Turn on the power to the light fixture. The bulb should begin blinking continuously, indicating it is in pairing mode. If it does not blink, cycle the power off and on five times to reset it into pairing mode.
- Add Device in App: Open the Feit Electric app. Ensure your phone's Bluetooth is enabled. The app should detect the new device. Follow the on-screen prompts to add the bulb.
- Connect to Wi-Fi: Select your 2.4 GHz Wi-Fi network and enter the password when prompted. The bulb will connect to your home network. Note: This bulb requires a 2.4 GHz Wi-Fi network.
- Rename (Optional): Once connected, you can rename the bulb within the app for easier identification (e.g., "Living Room Lamp," "Bedroom Light").
- Integrate with Voice Assistants (Optional): To control the bulb using voice commands, link your Feit Electric account with Alexa or Google Assistant through their respective apps.
Image: Front view of the Feit Electric Smart Wi-Fi LED Bulb box, highlighting "Works with Alexa" and "Works with Google Assistant" logos, and the "Smart WiFi Bulb" designation.
Operating Instructions
The Feit Electric Smart Wi-Fi LED Bulb offers various control methods:
Control via Feit Electric App:
The Feit Electric app allows comprehensive control from anywhere with internet access.
- Remote Access: Turn lights on or off from any location.
- Dimming: Adjust the brightness level of the bulb.
- Grouping: Combine multiple smart bulbs to control them simultaneously.
- Scheduling: Set specific times for the bulb to turn on, turn off, or change brightness.
- Device Sharing: Share control of your smart bulbs with other users.
Image: A smartphone displaying the Feit Electric app interface, illustrating features like Remote Access, Dimming, Grouping, Voice Control, Scheduling, and Device Sharing.
Image: A smartphone showing the Feit Electric app controlling a lamp, with options for dimming the light to 50% and setting schedules.
Image: A kitchen scene with pendant lights, and a smartphone displaying the Feit Electric app's "Grouping" feature, allowing multiple lights to be controlled together.
Voice Control:
Once integrated, use voice commands with Alexa or Google Assistant devices.
- "Alexa, turn on the Living Room Light."
- "Hey Google, dim the Bedroom Light to 50%."
- "Alexa, set the Kitchen Lights to soft white."
Image: An Amazon Echo Dot smart speaker, accompanied by "Works with Alexa" and "Hey Google" logos, indicating voice control compatibility.
Maintenance
The Feit Electric Smart Wi-Fi LED Bulb is designed for long-term, low-maintenance operation.
- Cleaning: Ensure the bulb is cool and the power is off before cleaning. Wipe the bulb with a soft, dry cloth. Do not use liquid cleaners or abrasive materials.
- Lifespan: The bulb has a rated lifespan of 15,000 hours, minimizing the need for frequent replacement.
- Mercury-Free: This LED bulb is 100% mercury-free.
Troubleshooting
If you encounter issues with your smart bulb, consider the following:
- Bulb Not Connecting/Flickering:
- Ensure your Wi-Fi network is 2.4 GHz. The bulb is not compatible with 5 GHz networks.
- Avoid using the bulb with a fader (dimmer) switch. It must be on a standard on/off switch for proper operation. Using a fader switch can cause connectivity issues and flickering.
- Try resetting the bulb by cycling the power off and on five times.
- Bulb Not Entering Pairing Mode (Not Blinking):
- Cycle the power to the bulb off and on five times, waiting a few seconds between each cycle. This should force the bulb into pairing mode (continuous blinking).
- Connectivity Drops:
- Ensure your Wi-Fi router is within a reasonable range of the bulb.
- If you have a mesh network, ensure it is configured to allow 2.4 GHz devices to connect easily.
- Occasionally, resetting the bulb or restarting your router may resolve intermittent connectivity issues.
- App Issues:
- Ensure your Feit Electric app is updated to the latest version.
- Restart the app or your smartphone.
Specifications
| Feature | Detail |
|---|---|
| Brand | Feit Electric |
| Model Name | 60 Watt Equivalent WiFi Dimmable, No Hub Required, Alexa or Google Assistant, Filament A19 |
| Part Number | A1960CL/927CA/FIL/AG |
| Light Type | LED |
| Bulb Shape Size | A19 |
| Bulb Base | E26 |
| Wattage | 8.8 watts |
| Incandescent Equivalent | 60 Watts |
| Brightness | 800 Lumens |
| Light Color | Soft White |
| Color Temperature | 2700 Kelvin |
| Color Rendering Index (CRI) | 90 |
| Voltage | 120 Volts (100 to 120 Volts and 60 Hertz) |
| Average Life | 15,000 Hours |
| Control Method | App (Feit Electric), Voice (Alexa, Google Assistant) |
| Connectivity | 2.4 GHz Wi-Fi |
| Material | Plastic |
| Product Dimensions | 2.25" W x 4" H |
| Item Weight | 1.6 ounces |
| Indoor/Outdoor Usage | Outdoor (Suitable for use in enclosed fixtures) |
| Certifications | UL Listed, Energy Star Approved, CEC and FCC Compliant |
Image: A detailed close-up of the Feit Electric Smart Wi-Fi LED Bulb, showcasing its visible LED filaments and E26 screw base.
Image: Diagram illustrating the dimensions of the Feit Electric Smart Wi-Fi LED Bulb, showing a height of 4 inches and a diameter of 2.25 inches.
Warranty and Support
Warranty: This Feit Electric bulb comes with a one-year warranty from the date of purchase.
Contact Information: For customer service or warranty claims, please contact Feit Electric:
- Email: info@feit.com
- Toll-Free Phone: 1-866-326-BULB
