Allied Brass PG-2T-22 Pacific Grove 22 Inch Two-Tiered Glass Shelf Instruction Manual

Product Overview

The Allied Brass PG-2T-22 Pacific Grove Collection Two-Tiered Glass Shelf is designed to provide functional storage and enhance the aesthetic of your bathroom. Crafted from solid brass with acrylic accents and beveled-edge glass, this wall-mounted shelf offers durability and a contemporary design with traditional elements.

Image: Allied Brass PG-2T-22 Pacific Grove Two-Tiered Glass Shelf, Matte White finish. This image shows the complete shelf unit, highlighting its two glass tiers and twisted accent supports.

Key Features:

• Crafted from solid brass materials for durability.
• Features two glass shelves for storage.
• Acrylic components subtly accentuate the design.
• Designed for concealed screw wall mounting.
• Contemporary design with traditional elements.

Setup and Installation

This shelf unit is designed for wall-mounted installation using concealed screws. Ensure you have the necessary tools before beginning installation.

Required Tools (Not Included):

• Drill
• Drill bits appropriate for your wall type (e.g., masonry bit for tile/concrete, wood bit for studs)
• Phillips head screwdriver
• Level
• Measuring tape
• Pencil

Installation Steps:

1. Select Location: Choose a suitable wall location for the shelf, ensuring it is level and at the desired height.
2. Mark Mounting Points: Hold the shelf's mounting brackets against the wall at the chosen location. Use a pencil to mark the screw hole positions. Ensure the marks are level.
3. Drill Pilot Holes: Drill pilot holes at the marked positions. The size of the drill bit should match the wall anchors (if used) or the screw diameter. For tile or masonry, use appropriate drill bits and anchors.
4. Insert Wall Anchors (if needed): If drilling into drywall without a stud, insert suitable wall anchors into the pilot holes.
5. Attach Mounting Brackets: Align the shelf's mounting brackets with the drilled holes. Secure the brackets to the wall using the provided screws. Do not overtighten.
6. Install Glass Shelves: Carefully place the glass shelves onto the support arms. Ensure they are seated securely.
7. Secure Glass (if applicable): Some models may include small set screws or clips to secure the glass in place. Tighten these gently if present.
8. Final Check: Gently test the shelf's stability. Ensure all components are secure and the shelf is level.

Note: For optimal stability and safety, it is recommended to mount the shelf into wall studs whenever possible. If mounting into drywall, use heavy-duty wall anchors appropriate for the shelf's weight capacity and intended use.

Operating Instructions

The Allied Brass PG-2T-22 shelf is designed for storing bathroom essentials, decorative items, or other lightweight objects. To operate, simply place items on the glass shelves.

• Distribute weight evenly across the shelves.
• Avoid placing excessively heavy items on the shelves to prevent damage or detachment from the wall.
• Ensure items are stable and not prone to falling.

Maintenance

Proper maintenance will ensure the longevity and appearance of your Allied Brass shelf.

• Cleaning: Wipe the brass components and glass shelves with a soft, dry cloth.
• Avoid Harsh Cleaners: Do not use abrasive cleaners, ammonia-based products, or strong chemicals, as these can damage the finish of the brass and the glass.
• Regular Inspection: Periodically check the mounting screws to ensure they remain tight. Retighten if necessary, but do not overtighten.

Troubleshooting

Specifications

Image: Dimensional drawing of the Allied Brass PG-2T-22 shelf. This image illustrates the width (22 inches), depth (5.12 inches), and height (9.3 inches) of the shelf unit.

Warranty Information

The Allied Brass PG-2T-22 Pacific Grove Collection Glass Shelf is provided with a limited lifetime warranty against manufacturer's defects. This warranty covers defects in materials and workmanship under normal use and service.

For specific details regarding warranty claims or coverage, please refer to the official Allied Brass warranty documentation or contact customer support.

Support and Contact

If you have any questions, require assistance with installation, or need to report a defect, please contact Allied Brass customer support.

• Manufacturer: Avondale Decor LLC (Allied Brass)
• Website: www.alliedbrass.com (Note: This is a general assumption for a brand website, actual link might vary.)
• Customer Service: Refer to the manufacturer's website for current contact information, including phone numbers or email addresses.

When contacting support, please have your model number (PG-2T-22) and purchase information readily available.