ROBOTIME Corsac M60 3D Wooden Puzzle Rubber Band Gun Model: Assembly and Operation Manual

Introduction

Welcome to the ROBOTIME Corsac M60 3D Wooden Puzzle Rubber Band Gun Model. This manual provides detailed instructions for assembling and operating your wooden model kit. Designed for enthusiasts aged 14 and up, this kit offers an engaging building experience without the need for glue.

Safety Information

This product is a model toy designed to fire rubber bands. All projectiles are rubber bands, with a typical range of 3-5 meters. It is designed to be safe and should not cause injury when used as intended. Always aim away from faces and eyes. Keep small parts away from young children to prevent choking hazards. The wooden components are precision-cut from eco-friendly materials.

Package Contents

Before beginning assembly, verify that all components are present. Your kit should include:

• Pre-cut wooden sheets with various parts
• Rubber bands
• Detailed assembly guide
• Extra pieces for some fragile components
• Sandpaper or file (may be included for smoothing edges)

Assembly Instructions

Follow these step-by-step instructions carefully. No glue is required for assembly.

1. Preparation: Carefully detach all wooden pieces from their sheets. Use sandpaper or a file (if included) to smooth any rough edges.
2. Identify Parts: Refer to the included assembly guide to identify each part by its number or shape.
3. Interlocking Assembly: Connect the pieces according to the diagrams in the manual. Ensure a snug fit for all interlocking components.
4. Mechanism Assembly: Pay close attention to the assembly of the trigger, hammer, and cylinder mechanisms to ensure proper function.

Operating Instructions

Once assembled, your Corsac M60 model is ready for use.

1. Loading: Place a rubber band over the front barrel and pull it back to hook it onto the hammer mechanism.
2. Firing: Aim the model at a safe target. Pull the trigger to release the rubber band.
3. Range: The typical firing range is approximately 3-5 meters.

Maintenance

To ensure the longevity of your wooden model, follow these maintenance guidelines:

• Cleaning: Wipe the model with a dry, soft cloth to remove dust. Avoid using liquids or harsh chemicals.
• Storage: Store the model in a dry environment, away from direct sunlight or extreme temperature changes, to prevent wood warping or damage.
• Part Replacement: In case of minor breakage, small pieces can often be reattached with wood glue (not included). The kit includes extra pieces for some fragile components.

Troubleshooting

• Issue: Rubber bands do not fire or mechanism jams.
  Solution: Check that all moving parts (trigger, hammer, cylinder) are assembled correctly and move freely. Ensure the rubber band is properly seated on both the barrel and the hammer mechanism.
• Issue: Parts are difficult to fit together.
  Solution: Gently sand the edges of the interlocking parts if they are too tight. Do not force pieces, as this may cause breakage.
• Issue: A wooden part breaks during assembly.
  Solution: Refer to the extra pieces provided in the kit. If a critical piece is broken and no spare is available, contact customer support.

Specifications

Warranty and Support

For any questions, missing parts, or support regarding your ROBOTIME Corsac M60 model, please contact ROBOTIME customer service through their official website or the retailer where the product was purchased. Please have your model number (Corsac M60) and purchase details ready.