Introduction
This manual provides comprehensive instructions for the setup, operation, and maintenance of your OREI BP350 Region Free Blu-ray Player. Please read this manual thoroughly before using the product to ensure proper and safe operation. This player is designed to provide high-quality video and audio playback from Blu-ray discs, DVDs, and CDs, supporting multiple regions and video formats.
Setup
1. Unpacking and Contents
Carefully remove all components from the packaging. Ensure all items are present before discarding packaging materials. The box should contain the OREI BP350 Blu-ray Player and an HDMI cable.
Figure 1: Front view of the OREI BP350 Blu-ray Player, showing the disc tray and control buttons.
2. Connecting the Player
Follow these steps to connect your Blu-ray player to your television and power source:
- HDMI Connection: Connect one end of the supplied HDMI cable to the 'HDMI OUT TO TV' port on the back of the Blu-ray player. Connect the other end to an available HDMI input port on your television.
- Power Connection: Plug the power cord into the 'DC IN' port on the back of the player, then plug the other end into a suitable electrical outlet. The player supports 100-240V dual voltage for worldwide use.
- Network Connection (Optional): For smart features and firmware updates, connect the player to your home network. This model features built-in Wi-Fi for simple wireless setup.
Figure 2: Rear view of the OREI BP350 Blu-ray Player, highlighting the HDMI output, DC input, and other connectivity options.
3. Initial Power On
After making all connections, press the Power button on the front of the player or on the remote control to turn on the unit. Follow any on-screen prompts for initial setup, such as language selection and network configuration.
Operating Instructions
1. Disc Playback
The OREI BP350 supports Blu-ray discs (Zone A/B/C), DVDs (Region 0-9), and CDs. To play a disc:
- Press the Eject button on the player or remote to open the disc tray.
- Place the disc gently onto the tray with the label side facing up.
- Press the Eject button again to close the tray. The player will automatically begin reading the disc.
This player features built-in 4K NTSC↔PAL 4K HD conversion, allowing seamless playback of discs from different video standards.
2. USB Playback
You can play media files from a USB storage device. Insert the USB device into the USB port on the front of the player. Use the remote control to navigate to the USB input and select the desired media file (DivX, MPEG1, MPEG2, MPEG4, MP3, WMA, JPEG).
3. Remote Control Usage
The included remote control provides full functionality for the player. Ensure the batteries (2 AAA, not included) are correctly inserted. Point the remote directly at the player's front panel. Common functions include Power, Play/Pause, Stop, Fast Forward/Rewind, Chapter Skip, Volume, Menu navigation, and USB direct recording.
Figure 3: The OREI BP350 Blu-ray Player shown with its accompanying remote control.
Maintenance
1. Cleaning
To maintain the player's appearance and performance:
- Wipe the exterior of the player with a soft, dry cloth. Do not use liquid cleaners or aerosol sprays.
- Keep the disc tray clean and free of dust.
- For discs, wipe from the center outwards with a soft, lint-free cloth.
2. Care Instructions
To ensure longevity of your player:
- Avoid placing the player in direct sunlight or near heat sources.
- Ensure adequate ventilation around the unit.
- Do not block ventilation openings.
- Avoid exposing the player to moisture or extreme temperatures.
Troubleshooting
If you encounter issues with your OREI BP350 Blu-ray Player, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| No Power | Power cord not securely connected. | Check power cord connection to player and outlet. |
| No Picture | HDMI cable not connected properly; Incorrect TV input selected. | Ensure HDMI cable is secure. Select correct HDMI input on TV. |
| No Sound | TV volume muted or too low; Audio settings incorrect. | Increase TV volume. Check player's audio output settings. |
| Disc Not Playing / "No Disc" message | Disc is dirty, scratched, or inserted incorrectly. | Clean the disc. Ensure disc is inserted label-side up. Try another disc. |
| Remote Control Not Working | Batteries are dead or inserted incorrectly; Obstruction between remote and player. | Replace batteries. Ensure clear line of sight to player's sensor. |
Specifications
| Feature | Detail |
|---|---|
| Model Number | BP350-DB9 |
| Product Dimensions | 7.7 x 10.6 x 1.7 inches |
| Item Weight | 3.09 pounds |
| Media Type Support | Blu-Ray Disc (Zone A/B/C), CD, DVD (Region 0-9) |
| Video Resolution | Up to 1920 x 1080 pixels (Full HD), 4K NTSC↔PAL 4K HD Converter |
| Connectivity | HDMI Out, USB, Wi-Fi, Component Video Out, Coaxial Audio Out |
| Special Features | Wireless, Progressive Scan, 192kHz-24 bit Audio DAC, USB direct recording |
| Power Requirements | 100-240V Dual Voltage |
| Batteries (Remote) | 2 AAA batteries (not included) |
Warranty and Support
OREI products are designed for reliability and performance. For information regarding warranty coverage and technical support, please refer to the warranty card included with your product or visit the official OREI website. Keep your purchase receipt as proof of purchase for warranty claims.
