Introduction
Thank you for purchasing the LITFAD LT531534R Modern Nautical Lighthouse Table Lamp. This manual provides essential information for the safe installation, operation, and maintenance of your new lamp. Please read these instructions carefully before use and retain them for future reference.
This table lamp features a unique lighthouse design crafted from natural resin with a fabric shade, ideal for indoor lighting in bedrooms, living rooms, offices, or kids' rooms. It is designed for use with E26/E27 base bulbs (not included).
Important Safety Instructions
To ensure safe operation and prevent personal injury or property damage, please adhere to the following safety guidelines:
- Professional Installation Recommended: For a safe and secure installation, it is suggested that installation be performed by a licensed electrician.
- Secure Mounting: Ensure that the electrical box to which this fixture will be mounted is properly attached to a structural member of the building.
- Wiring Caution: All wires are connected. When unpacking, be careful not to pull with wires as a bad connection may result.
- Assembly First: Do not connect electricity until your fixture is fully assembled.
- Bulb Replacement Safety: To reduce the risk of fire, electrical shock, or personal injury, always turn off and unplug the fixture and allow it to cool prior to replacing the light bulb.
- Avoid Direct Contact: Do not touch the bulb when the fixture is turned on or look directly at a lit bulb. Keep flammable materials away from a lit bulb.
- Indoor Use Only: This lamp is designed for indoor use only and is not waterproof.
Package Contents
Verify that all components are present and undamaged upon opening the package:
- Lighthouse Lamp Base (Resin)
- Fabric Lamp Shade
- Power Cord with Touch Switch
- User Manual (this document)
- Note: Bulb is not included and must be purchased separately.
Setup and Installation
Follow these steps to assemble and install your LITFAD table lamp:
- Unpack Components: Carefully remove all parts from the packaging. Place them on a clean, flat surface.
- Attach Lamp Shade: Secure the fabric lamp shade to the lamp base. Ensure it is centered and stable.
- Install Bulb: Insert an E26/E27 base bulb (LED, Incandescent, or Fluorescent, max 40W) into the lamp socket. Do not overtighten.
- Position Lamp: Place the lamp on a stable, flat surface in your desired location. Ensure the power cord can reach an electrical outlet without being strained or pinched.
- Connect Power: Plug the power cord into a standard AC110-120V electrical outlet.
Figure 1: Fully assembled LITFAD Nautical Lighthouse Table Lamp.
Operation
The LITFAD table lamp features a convenient touch switch for operation.
- Turning On/Off: Gently touch the lamp base or the designated touch area on the lamp to turn the light on or off.
- Brightness Control: This lamp typically offers a single brightness level. Repeated touches may cycle through different brightness settings if available, or simply turn the lamp on/off. Refer to the bulb's specifications for dimming capabilities if using a dimmable bulb with a compatible touch switch.
Figure 2: Lamp in the 'Off' state.
Maintenance
Bulb Replacement
To replace the bulb:
- Ensure the lamp is turned off and unplugged from the power outlet.
- Allow the old bulb to cool completely before touching it.
- Carefully unscrew the old bulb from the E26/E27 socket.
- Screw in a new E26/E27 base bulb (max 40W).
- Plug the lamp back in and test its operation.
Cleaning
To clean your lamp:
- Always unplug the lamp before cleaning.
- Wipe the resin base with a soft, dry cloth. Avoid abrasive cleaners or solvents.
- The fabric shade can be gently dusted with a soft brush or a lint roller. Do not wet the shade.
Figure 3: Detailed view of the lamp base.
Troubleshooting
If you encounter issues with your lamp, refer to the following table:
| Problem | Possible Cause | Solution |
|---|---|---|
| Lamp does not turn on. |
|
|
| Light flickers. |
|
|
| Touch function is unresponsive. |
|
|
Figure 4: Lamp comparison, on and off.
Specifications
| Model Number | LT531534R |
| Brand | LITFAD |
| Fixture Width | 6 inches (15 cm) |
| Fixture Height | 18 inches (45.5 cm) |
| Product Dimensions | 6"D x 6"W x 18"H |
| Material | Natural Resin + Fabric |
| Color | Rudder (Blue shade) |
| Bulb Base | E26/E27 |
| Number of Lights | 1 |
| Bulb Type | LED/Incandescent/Fluorescent |
| Max Wattage Per Bulb | 40W |
| Voltage | AC110-120V |
| Switch Type | Touch |
| Indoor/Outdoor Usage | Indoor |
| Item Weight | 3.99 pounds (approx. 1.81 kg) |
Warranty Information
This LITFAD table lamp comes with a 2-year warranty from the date of purchase. This warranty covers manufacturing defects and material flaws under normal use. It does not cover damage caused by misuse, accidents, unauthorized modifications, or normal wear and tear. Please retain your proof of purchase for warranty claims.
Customer Support
If you have any questions, require assistance with installation, or need to report a defect, please contact LITFAD customer support through the retailer where the product was purchased. For general inquiries, you may visit the official LITFAD store page:
Visit the LITFAD Store on Amazon
Please have your model number (LT531534R) and purchase details ready when contacting support.