1. Introduction
The AVer CL01PTZ Multi Camera Controller is designed for precise control of up to seven PTZ (Pan-Tilt-Zoom) cameras. It features an intuitive joystick and a comprehensive control panel, allowing operators to adjust camera functions such as pan, tilt, zoom, focus, exposure, and white balance. This controller is compatible with all AVer Auto Tracking and PTZ cameras, as well as various other brands, supporting multiple control interfaces including VISCA, Pelco-D/P Protocols, RS-232, 422, 485, and IP.
Figure 1.1: Overview of AVer CL01PTZ Camera Controller features, including Pan/Tilt/Zoom Speed Control, ability to operate 7 PTZ Cameras, 3 Infinite Rotation Knobs, Multiple Control Interfaces (RS-232, RS-422, RS-485 IP), and VISCA Pelco-D/P Protocols.
2. Setup
Follow these steps to set up your AVer CL01PTZ Multi Camera Controller:
- Power Connection: Connect the provided DC 12V power adapter to the DC 12V port on the rear panel of the controller and then to a power outlet.
- Camera Connection: Connect your PTZ cameras to the controller using the appropriate interface ports (RS-232, RS-422, RS-485, or LAN) based on your camera's specifications and desired control method. Ensure proper cabling and termination for RS-422/485 connections.
- USB Connection (Optional): For firmware upgrades or specific PC-based control applications, connect a Micro USB cable from the UPGRADE port to your computer.
- Network Connection (Optional): If using IP control, connect an Ethernet cable to the LAN port and to your network.
Figure 2.1: Rear panel of the AVer CL01PTZ Controller, illustrating the UPGRADE (Micro USB), RS-422, RS-232, LAN (RJ45), and DC 12V power input ports.
Figure 2.2: AVer CL01PTZ Controller highlighting the joystick, rotation buttons, and various rear panel connections including Micro USB, RS-422, RJ45, RS-232, and DC 12 Volt input.
3. Operating Instructions
The CL01PTZ controller provides comprehensive control over your connected cameras. Familiarize yourself with the control panel layout:
Figure 3.1: Front panel of the AVer CL01PTZ Controller, showing the joystick, camera selection buttons, numeric keypad, and various function controls for exposure, white balance, focus, and color.
3.1. Camera Selection
- CAM 1-7 Buttons: Press the corresponding button (CAM 1 to CAM 7) to select the camera you wish to control. The selected camera's indicator will illuminate.
3.2. Pan, Tilt, and Zoom Control
- Joystick: Move the joystick left/right to pan the camera, and up/down to tilt the camera.
- Joystick Rotation: Rotate the joystick clockwise or counter-clockwise to zoom in or out.
- PAN TILT RESET: Press this button to reset the camera's pan and tilt position to its default.
3.3. Focus Control
- FOCUS Knob (NEAR/FAR): Rotate this knob to manually adjust the camera's focus. Rotate towards NEAR for closer objects, and towards FAR for distant objects.
- AUTO / MANUAL Button: Toggles between automatic and manual focus modes.
- ONE PUSH AF: In manual focus mode, press this button to momentarily engage autofocus, then return to manual control.
3.4. Exposure Control
- AE AUTO Button: Toggles automatic exposure mode on/off.
- AE MODE Button: Cycles through various automatic exposure modes (e.g., full auto, shutter priority, iris priority).
- BRIGHT Knob (+/-): Adjusts the brightness level when in manual exposure mode or to compensate in auto modes.
3.5. White Balance Control
- WB AUTO Button: Toggles automatic white balance mode on/off.
- WB MODE Button: Cycles through various white balance presets (e.g., indoor, outdoor, fluorescent).
- R Knob (+/-): Adjusts the red gain in manual white balance mode.
- B Knob (+/-): Adjusts the blue gain in manual white balance mode.
- ONE PUSH AWB: In manual white balance mode, press this button to perform a one-time automatic white balance adjustment based on the current scene.
3.6. Other Controls
- POWER Button: Turns the controller on or off.
- BACK LIGHT Button: Activates or deactivates backlight compensation for challenging lighting conditions.
- MENU Button: Accesses the camera's on-screen display (OSD) menu for advanced settings. Use the joystick and other buttons to navigate.
- WDR OFF / - and WDR ON / + Buttons: Controls Wide Dynamic Range (WDR) function.
- COLOR GAIN (+/-): Adjusts the overall color saturation.
- COLOR HUE (+/-): Adjusts the color tint.
- PRESET (0-9) Buttons: Use the numeric keypad (0-9) to store and recall camera preset positions. To store a preset, position the camera, then press PRESET followed by a number. To recall, simply press the desired number.
- RESET Button: Resets camera settings to factory defaults or clears a specific function.
- HOME Button: Returns the camera to its home position.
- AUTO TRACKING Switch (OFF/ON): Enables or disables the auto-tracking feature on compatible AVer cameras.
4. Maintenance
Proper maintenance ensures the longevity and optimal performance of your CL01PTZ controller.
- Cleaning: Use a soft, dry cloth to clean the exterior of the controller. For stubborn dirt, a slightly damp cloth with mild detergent can be used, ensuring no liquid enters the device. Avoid abrasive cleaners or solvents.
- Storage: Store the controller in a cool, dry place away from direct sunlight, extreme temperatures, and high humidity when not in use.
- Handling: Handle the joystick and buttons with care. Avoid excessive force or sudden impacts.
5. Troubleshooting
If you encounter issues with your CL01PTZ controller, refer to the following common troubleshooting steps:
- Controller Not Powering On:
- Ensure the DC 12V power adapter is securely connected to both the controller and a working power outlet.
- Verify the power outlet is functional.
- Camera Not Responding:
- Check that the correct camera (CAM 1-7) is selected on the controller.
- Verify all connection cables (RS-232, RS-422, RS-485, LAN) between the controller and the camera are securely connected.
- Ensure the camera's control protocol settings (e.g., VISCA, Pelco-D/P, baud rate, address) match the controller's configuration.
- Restart both the controller and the camera.
- Joystick or Buttons Not Functioning:
- Ensure the controller is powered on and a camera is selected.
- If specific buttons are unresponsive, try restarting the controller.
- Image Quality Issues (Focus, Exposure, White Balance):
- Ensure the camera is not in an automatic mode that overrides manual adjustments. Switch to manual mode if necessary.
- Perform a ONE PUSH AF or ONE PUSH AWB to recalibrate.
- Adjust the respective knobs (FOCUS, BRIGHT, R, B) carefully.
If problems persist, consult the AVer support website or contact AVer technical support for further assistance.
6. Specifications
Below are the technical specifications for the AVer CL01PTZ Multi Camera Controller:
| Feature | Specification |
|---|---|
| Brand | AVer |
| Series | Professional PTZ Camera Controller |
| Item Model Number | PTCAMCTRL |
| Hardware Platform | Laptop, PC |
| Item Weight | 6.75 pounds |
| Product Dimensions (LxWxH) | 15.5 x 9 x 8 inches |
| Color | Black and Silver |
| Power Source | DC, AC |
| Voltage | 12 Volts |
| Max Number of Supported Devices | 7 (Cameras) |
| Compatible Devices | Camera |
| Control Interfaces | VISCA, Pelco-D/P Protocols, RS-232, 422, 485 IP |
7. Warranty and Support
AVer products are designed for reliability and performance. For information regarding product warranty, please refer to the warranty documentation included with your purchase or visit the official AVer website. For technical support, troubleshooting assistance, or service inquiries, please contact AVer customer support through their official channels.
AVer Contact Information: Please visit www.averusa.com for the latest support resources and contact details.
