Introduction
The Neoteck Coating Thickness Gauge is designed for non-destructive measurement of coating and paint thickness. It is widely used in manufacturing, metal processing, chemical industries, and goods inspection. This device is suitable for use in laboratories, workshops, and outdoor environments, providing reliable and accurate measurements.
Product Features
- Dual Technology Measurement: Automatically recognizes ferrous (Fe) and non-ferrous (NFe) substrates.
- Wide Measurement Range: 0 to 1500 µm (0 to 59.1 mil).
- High Precision: Accuracy of ±(3% + 2µm).
- High Resolution: 0.1 µm / 0.01 mil.
- HD Backlit LCD Display: Clearly shows metal type, operating mode, readings in µm or mils, and battery status.
- Automatic Power Off: Shuts down after 5 minutes of inactivity to conserve battery life (can be disabled).
- V-Groove Design Probe: Allows for easy and accurate measurement on curved metallic surfaces.
- Automatic Calibration: Supports zero-point and multi-point calibration.
Image: The Neoteck Coating Thickness Gauge showing its HD backlit display, anti-slip groove design, and high precision probe.
Image: Key features of the gauge, including automatic recognition of ferrous and non-ferrous materials, single/continuous measurement modes, automatic calibration, auto power-off, and V-groove probe design for curved surfaces.
Package Contents
Please check the package to ensure all items are present:
- 1 x Coating Thickness Gauge
- 1 x Aluminum Substrate
- 1 x Iron Substrate
- 1 x Black Box (Storage Case)
- 5 x Calibration Coating Films
- 1 x English Manual
- 2 x AAA Batteries
Image: All items included in the package: the Neoteck gauge, calibration films, aluminum and iron substrates, AAA batteries, and the user manual.
Specifications
| Parameter | Value |
|---|---|
| Principle | F-probe: Magnetic Induction; N-probe: Eddy Current |
| Measurement Range | 0 ~ 1500 µm (0 ~ 59.1 mil) |
| Accuracy | ±(3% + 2 µm); ±(3% + 0.08 mil) |
| Resolution | 0.1 µm / 0.01 mil |
| Units | µm, mil |
| Minimum Convex Curvature Radius | 1.5 mm |
| Minimum Concave Curvature Radius | 25 mm |
| Minimum Measurement Area | Diameter 6 mm |
| Minimum Substrate Thickness | 0.5 mm (Ferrous); 0.3 mm (Non-ferrous) |
| Power Supply | 2 x AAA Batteries (included) |
| Operating Temperature | 0 ~ 40 ℃ (32 ~ 104 ℉) |
| Operating Humidity | 20% ~ 90% RH |
| Dimensions | 124 x 67 x 28 mm (4.88 x 2.64 x 1.1 inches) |
| Weight | 105g (3.70 oz) without batteries |
Image: Detailed dimensions of the Neoteck Coating Thickness Gauge, including its length (123mm/4.84in), width (66mm/0.26in), and thickness (25mm/0.98in).
Setup
- Battery Installation: Open the battery compartment cover on the back of the device. Insert the two AAA batteries, ensuring correct polarity (+/-). Close the battery compartment cover securely.
- Power On: Press and hold the power button (usually marked with an ON/OFF symbol) for more than 0.5 seconds until the LCD screen illuminates.
- Initial Check: The gauge will perform a self-test. Ensure the display shows clear readings and no error messages.
Operating Instructions
Power On/Off
- To Turn On: Press and hold the power button for more than 0.5 seconds.
- To Turn Off: Press and hold the power button until the screen goes blank.
- Automatic Shut-off: The gauge will automatically turn off after 5 minutes of inactivity. To disable this feature, press the Menu/Setup button and uncheck the 'Auto Off' radio button (if available in your model's menu).
Taking Measurements
- Ensure the gauge is powered on.
- Select the desired measurement mode (Single Point or Continuous) by pressing the 'MODE/RESET' button.
- Place the probe vertically and lightly against the surface to be measured. Press it quickly and smoothly.
- Read the thickness value displayed on the LCD screen. The gauge will automatically detect the substrate type (Fe or NFe).
Image: Illustrates the difference between Single Point and Multi-Point Average measurement modes. Note: The probe should be quickly and smoothly pressed vertically and lightly against the part to be measured.
Unit Switching
- Press the 'um/mils' button to switch between micrometers (µm) and mils (mil) units.
Calibration
Regular calibration ensures the accuracy of your measurements. The gauge supports zero-point and multi-point calibration.
- Entering Calibration Mode: Long press and hold the 'CALIB/ZERO' button to enter calibration mode.
- Zero-Point Calibration: In calibration mode, place the probe directly on the bare aluminum (NFe) or iron (Fe) substrate provided. Press the 'CALIB/ZERO' button to perform zero calibration for that substrate.
- Multi-Point Calibration: For more precise calibration, use the provided calibration films. Place a film of known thickness on the substrate, then place the probe on the film. Adjust the reading using the up/down buttons to match the film's thickness, then confirm. Repeat for other film thicknesses as needed.
- Exiting Calibration Mode: Press the 'MODE/RESET' button to exit calibration mode and return to measurement mode.
Image: The gauge in automatic calibration mode, showing the use of magnetic (FE) and non-magnetic (NFE) calibration plates.
Maintenance
- Battery Storage: If the gauge will not be used for an extended period, remove the batteries and store them separately. This prevents potential damage to the device from battery leakage.
- Cleaning: Wipe the device with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- Storage: Always store the coating thickness gauge in its protective carrying pouch when not in use to prevent damage. Keep it in a dry environment, away from extreme temperatures and direct sunlight.
Troubleshooting
- Device Not Turning On: Ensure batteries are correctly installed and have sufficient charge. Replace batteries if necessary.
- Inaccurate Readings: Perform a calibration as described in the 'Calibration' section. Ensure the probe is clean and free of debris. Verify the substrate is clean and flat (or appropriately curved for the V-groove probe).
- Display Issues: If the display is dim or flickering, replace the batteries. If the issue persists, contact customer support.
- No Substrate Detection: Ensure the probe is making proper contact with the surface. The gauge may not detect very thin coatings or non-metallic substrates.
Applications
The Neoteck Coating Thickness Gauge is a versatile tool suitable for various applications:
- Automotive Industry: Ideal for inspecting car paint thickness, especially useful for used car buyers to detect repainted areas or accident damage.
- Manufacturing: Quality control in production lines for coated parts.
- Metal Processing: Measuring plating and coating thickness on various metal components.
- Chemical Industry: Ensuring proper coating application for corrosion protection.
- General Inspection: For any application requiring non-destructive measurement of paint, enamel, chrome, or anodized coatings on steel, aluminum, or copper.
Image: Examples of wide applications for the gauge, including used car markets, car factories, industrial paint quality control, metalwork, and foil production.
Warranty and Support
Neoteck products are designed for reliability and performance. For any questions, technical assistance, or warranty claims, please refer to the contact information provided with your purchase or visit the official Neoteck website. Please retain your proof of purchase for warranty purposes.
