Soundcore A3025011-1
Contents
Anker Soundcore Life Q20 Hybrid Active Noise Cancelling Headphones
Model: A3025011-1
Introduction
The Soundcore Life Q20 headphones are engineered to deliver an immersive audio experience with advanced noise-cancelling capabilities. Designed for comfort and extended use, they are perfect for travel, work, and everyday listening.

Figure 1: Soundcore Life Q20 Headphones and Included Travel Case.

Figure 2: Hi-Res Audio certification ensures exceptional clarity and detail.

Figure 3: Hybrid Active Noise Cancellation blocks up to 90% of ambient noise.

Figure 4: BassUp Technology strengthens bass frequencies for a powerful audio experience.

Figure 5: Travel Ready design with up to 40 hours of playtime.

Figure 6: Ergonomic design adapts to your ears for maximum comfort.
What's in the Box
- Soundcore Life Q20 Active Noise Cancelling Headphones
- Micro-USB Cable
- 3.5 mm AUX Cable
- Travel Case
- User Manual
Setup
Charging
Before first use, fully charge your Soundcore Life Q20 headphones. Connect the provided Micro-USB cable to the charging port on the headphones and a compatible USB power source. A full charge provides up to 40 hours of playtime with Active Noise Cancellation (ANC) on, or 60 hours in standard wireless mode. A quick 5-minute charge can provide up to 4 hours of listening time.
Bluetooth Pairing
To pair your headphones with a Bluetooth-enabled device:
- Ensure the headphones are powered off.
- Press and hold the power button until the LED indicator flashes blue, indicating pairing mode.
- On your device, enable Bluetooth and select 'Soundcore Life Q20' from the list of available devices.
- Once connected, the LED indicator will turn solid blue.
The headphones support Bluetooth 5.0 and have a wireless range of up to 15 meters (49.21 feet).
Operating Your Headphones
Active Noise Cancellation (ANC)
The hybrid active noise cancellation feature effectively reduces up to 90% of low and mid-frequency ambient noises. To activate or deactivate ANC, use the dedicated ANC button on the earcup. For optimal noise cancellation, ensure the earcups create a tight seal around your ears.
BassUp Technology
Experience enhanced bass with Soundcore's exclusive BassUp Technology. This feature analyzes your audio's bass frequencies in real-time to strengthen them by up to 100%. Refer to the controls section for how to activate this feature.
Controls
The headphones feature intuitive controls located on the earcups:
- Power Button: Press and hold to power on/off.
- ANC Button: Toggle Active Noise Cancellation on/off.
- Volume Up/Down: Adjust playback volume.
- Play/Pause: Press once to play or pause audio.
- Skip Track: Press and hold volume up/down for next/previous track.
- Activate BassUp: Double press the play button.
- Answer/End Call: Press the play button once.
- Reject Call: Press and hold the play button.
- Activate Voice Assistant: Press and hold the play button.
Wired Mode
Use the included 3.5 mm AUX cable for unlimited listening in wired mode, especially useful when battery is low or for devices without Bluetooth connectivity.
Video 1: Official product overview of Soundcore Life Q20 Noise Cancelling Headphones, demonstrating key features and usage.
Maintenance and Care
To ensure the longevity and optimal performance of your Soundcore Life Q20 headphones, follow these maintenance guidelines:
- Clean your device regularly with a soft, dry cloth.
- Avoid using lotions or other products under the portions of the device that contact your skin.
- Do not wear over injured skin.
- Where applicable, tighten the adjustment until snug, but not uncomfortably tight.
- If your skin becomes irritated, stop using the device. If symptoms are severe or persist, consult your physician.
- Store the headphones in the provided travel case when not in use to protect them from dust and damage.
Troubleshooting
No Sound/Poor Sound Quality
- Ensure the headphones are properly paired with your device.
- Check the volume levels on both the headphones and your connected device.
- If using wired mode, ensure the 3.5mm AUX cable is fully inserted into both the headphones and the audio source.
- For optimal noise cancellation, make sure the earcups create a tight seal around your ears.
Connectivity Issues
- Ensure the headphones are within the Bluetooth range (up to 15 meters).
- Clear the Bluetooth pairing history on your device and re-pair the headphones.
- Restart both your headphones and the connected device.
Battery Not Charging
- Ensure the Micro-USB cable is securely connected to both the headphones and the power source.
- Try using a different Micro-USB cable or power adapter.
- Verify the power source is functioning correctly.
Specifications
| Feature | Detail |
|---|---|
| Model Name | AK-A3025011-1 |
| Dimensions | 7.68 x 7.09 x 3.07 inches |
| Item Weight | 9.3 ounces |
| Connectivity Technology | Wireless, Bluetooth |
| Bluetooth Version | 5.0 |
| Bluetooth Range | 15 m / 49.21 ft |
| Noise Control | Active Noise Cancellation |
| Frequency Response | 16 Hz - 40 kHz |
| Battery Life (ANC On) | 40 Hours |
| Battery Life (Standard) | 60 Hours |
| Charging Time (5 min) | 4 Hours Playback |
| Headphones Jack | 3.5 mm Jack |
| Material | Memory Foam |
Warranty Information
For detailed warranty information regarding your Soundcore Life Q20 headphones, please refer to the official Soundcore website or the warranty card included in your product packaging. Warranty terms and conditions may vary by region and retailer.
Customer Support
Should you encounter any issues or have questions about your Soundcore Life Q20 headphones, please visit the official Soundcore support page or contact their customer service team for assistance.
Visit the Soundcore Store: Soundcore Store on Amazon
Documents and downloads
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.