Introduction
This manual provides detailed instructions for the assembly, operation, and maintenance of your Leifheit Clean Twist 2.0 Mobile Spin Mop and Bucket Set. Designed for efficient and effortless floor cleaning, this system features a hands-free spin-drying mechanism, an adjustable telescopic handle, and a mobile bucket for enhanced convenience.
- Effortless Hands-Free Spin Drying: Patented spin technology integrated into the telescopic handle allows for wringing without bending or touching dirty water.
- Adjustable Telescoping Handle: Handle height can be adjusted from 42.9" to 55.1" (109cm to 140cm) for comfortable use and reaching tight spaces.
- Dual-Fiber Micro Duo Mop Head: Ultra-absorbent microfiber head suitable for various floor types including wood, tile, vinyl, and laminate.
- Rolling Spin Bucket with Splash-Proof Drainage: Durable 6L (1.3 gallons) bucket with 360° swivel wheels, integrated handle, spin wringer, and wide pour lip for easy filling, wringing, and emptying.
- 360° Swivel Joint & Flat-Lying Head: Mop head rotates for cleaning under furniture and in corners, with a non-slip grip cap for upright storage.
Setup
1. Unpacking and Component Check
Carefully remove all components from the packaging. Ensure you have the telescopic handle, the bucket with the spinning wringer, the Micro Duo mop head, and the rolling cart base.
2. Handle Assembly
Connect the sections of the telescopic handle by twisting them together until secure. Adjust the handle to your desired height by twisting the locking mechanism, extending the handle, and then twisting to lock it in place.
3. Mop Head Attachment
Align the mop head with the base of the handle. Press firmly until it clicks securely into place. Ensure the mop head is fully attached before use.
4. Rolling Cart Assembly
If the rolling cart is not pre-attached, simply place the bucket onto the designated slots on the wheeled base until it locks securely. The wheels allow for easy movement of the bucket during cleaning.
Operating Instructions
1. Filling the Bucket
Fill the bucket with water and your preferred cleaning solution. Do not exceed the maximum fill line indicated inside the bucket.
2. Wetting the Mop Head
Submerge the mop head completely into the water in the bucket. Ensure the microfiber strands are thoroughly saturated.
3. Spin-Drying the Mop
To wring out excess water, unlock the handle's spin mechanism by sliding the lever down. Place the wet mop head into the spinning basket. Push the handle down repeatedly to activate the spin-dry function. The more you push, the drier the mop head becomes. Once desired dampness is achieved, slide the lever up to lock the handle.
This video provides a visual guide on how to effectively use the Leifheit Clean Twist Spin Mop, demonstrating the wetting of the mop head and the hands-free spin-drying mechanism.
4. Mopping
Begin mopping your floors. The 360° swivel joint allows for easy maneuverability around furniture and into corners. The telescopic handle can be adjusted to a comfortable length to reduce strain.
This image illustrates the Leifheit Clean Twist 2.0 Mobile Spin Mop and Bucket Set during active use, showcasing its ergonomic design and hands-free operation. Key features such as the mobile bucket and spin-dry system are visually represented.
The mop's flexible 360° swivel joint allows the mop head to lay flat, enabling easy cleaning under low-lying furniture and in hard-to-reach areas.
5. Emptying the Bucket
Once cleaning is complete, use the integrated handle to transport the bucket. Utilize the wide pour lip to carefully empty the dirty water into a drain, minimizing splashes.
The bucket features an integrated handle for easy transport and a wide pour lip for convenient, splash-free emptying of dirty water.
Maintenance
1. Mop Head Care
The Micro Duo mop head is machine washable. For best results and to prolong its lifespan, wash it in a washing machine at 60°C (140°F) without fabric softener. It is recommended to use a washing bag to protect the mop head and your washing machine.
This image shows several clean microfiber mop heads in a laundry basket, emphasizing their reusability and ease of maintenance through machine washing.
2. Bucket and Handle Care
Rinse the bucket thoroughly with clean water after each use. Wipe down the handle and spinning mechanism to remove any residue. Store the mop and bucket in a dry place. The non-slip grip cap on the handle allows it to be parked against a wall without tipping over.
A close-up view of the mop head undergoing the spin-drying process within the bucket's integrated wringer, demonstrating the hands-free wringing mechanism.
Troubleshooting
- Mop head not spinning effectively: Ensure the handle's spin mechanism is unlocked before placing the mop head in the wringer. Push down firmly and consistently.
- Handle not extending/locking: Check that the telescopic handle's locking mechanism is fully disengaged before adjusting and fully engaged after adjustment.
- Bucket wheels not rolling smoothly: Inspect wheels for any debris or obstructions. Clean as necessary.
- Excessive splashing during wringing: Ensure the mop head is properly centered in the spinning basket. Do not overfill the bucket with water.
Specifications
| Brand | Leifheit |
| Model Number | 52102 |
| Included Components | Telescopic handle, Bucket with spinning wringer, Micro Duo mop and rolling cart |
| Item Volume | 6 Liters |
| Special Features | 360° Spin, Bucket with Wheels, Spin Mop, Telescoping Handle |
| Item Weight | 5.06 pounds (2.3 Kilograms) |
| Product Dimensions | 18.35 x 10.43 x 10.24 inches |
| Material | Microfibre (Mop Head), Plastic (Handle) |
| Handle Type | Telescopic |
This image provides the dimensions of the mop and bucket set, along with an illustration indicating that the microfiber mop head is machine washable, ideally in a washing bag.
Warranty and Support
For warranty information or technical support, please refer to the official Leifheit website or contact their customer service department. Keep your purchase receipt as proof of purchase.
