MOZA AirCross 2 Gimbal Instruction Manual

Introduction

The MOZA AirCross 2 is a professional 3-axis gimbal stabilizer designed for mirrorless and DSLR cameras, offering advanced stabilization and creative shooting modes. This manual provides comprehensive instructions for setting up, operating, maintaining, and troubleshooting your AirCross 2 gimbal to ensure optimal performance.

Figure 1: MOZA AirCross 2 Gimbal with iFocusM Follow Focus Motor and accessories.

Setup

1. Unboxing and Initial Inspection

Carefully unpack all components and verify that all items listed in the product packaging are present and undamaged. Refer to the product's official packaging for a complete list of contents.

2. Battery Installation and Charging

Before first use, ensure the battery's protective seal is removed. Fully charge the battery using the provided charging cable and a compatible USB power adapter. The gimbal features a MOZA Spark Power Supply System 2.0 for efficient power management.

Figure 2: Illustration of removing the battery protective seal before initial use.

3. Gimbal Assembly and Camera Mounting

Attach the quick release plate to your camera. Secure the camera onto the gimbal's mounting platform. Ensure all locks on the gimbal's axes are disengaged before proceeding with balancing.

4. Balancing the Gimbal

Proper balancing is critical for optimal performance and to prevent motor strain. Follow these steps for precise balancing:

1. Step 1: Tilt Axis Balance (Vertical) - Adjust the camera's position forward or backward until it remains level when tilted.
2. Step 2: Roll Axis Balance - Adjust the camera's left or right position until it remains level without tilting to either side.
3. Step 3: Pan Axis Balance - Adjust the horizontal position of the pan arm until the gimbal remains stable when rotated.

The MOZA AirCross 2 features axis locks to simplify the balancing process, allowing you to focus on one axis at a time. After balancing, perform an auto-tuning process for fine-tuning motor parameters.

Figure 3: Visual guide for initial setup, including balancing, unlocking axes, and checking battery.

Figure 4: The gimbal's OLED screen displaying auto-tuning, balance check 2.0, and profile settings.

Operating Instructions

1. Controls Overview

The MOZA AirCross 2 features intuitive controls for easy operation:

• Smart Wheel: Provides precise control over various functions, including focus, zoom, and axis movement.
• OLED Screen: Displays real-time status, mode information, and settings.
• Smart Trigger: Customizable button for quick access to frequently used functions.
• Joystick: Controls pan and tilt movements.

Figure 5: Close-up view of the MOZA AirCross 2's control panel, highlighting the smart wheel, OLED screen, and smart trigger.

2. Operating Modes

The gimbal supports various operating modes for diverse shooting scenarios:

• Pan-Follow Mode: The camera pans horizontally with your movement while tilt and roll axes are locked.
• Tilt-Follow Mode: The camera follows your tilt movements.
• All-Lock Mode: All three axes are locked, keeping the camera fixed in one direction.
• FPV Mode: Allows for full 360-degree rotation on all three axes, providing a first-person view effect.
• Inception Mode: Rotates the camera 360 degrees along the roll axis, creating a unique spinning shot.

3. Advanced Shooting Features

Leverage the MOZA AirCross 2's intelligent features for creative shots:

• Timelapse: Capture stunning time-lapse videos with customizable parameters.
• Motion Control: Program precise camera movements for repeatable shots.
• Panorama: Automatically stitch multiple photos into a wide panoramic image.
• Mimic Motion Control: Control the gimbal's movements by tilting your smartphone, offering intuitive and precise control.

Figure 6: A user demonstrating the MOZA AirCross 2's advanced shooting modes, including timelapse, motion control, and panorama.

Figure 7: The Mimic Motion Control interface on a smartphone, allowing intuitive gimbal control.

4. iFocusM Follow Focus Motor

The kit includes the iFocusM Follow Focus Motor for precise focus control. Attach the motor to the gimbal and connect it to your camera's focus gear. Control the focus via the gimbal's smart wheel or the MOZA Master App.

Maintenance

1. Cleaning

Regularly clean the gimbal with a soft, dry cloth. Avoid using liquid cleaners or solvents that may damage the surface or internal components. Ensure no dust or debris accumulates around the motors or joints.

2. Storage

When not in use, store the gimbal in its protective case in a cool, dry place. Ensure the axes are locked to prevent accidental movement and potential damage during transport or storage.

3. Firmware Updates

Periodically check the official MOZA website for firmware updates. Firmware updates can improve performance, add new features, and resolve known issues. Follow the instructions provided by MOZA for safe and successful firmware upgrades.

Troubleshooting

This section addresses common issues you might encounter with your MOZA AirCross 2 gimbal.

• Gimbal enters "sleep mode" or vibrates excessively: This often indicates improper balancing. Re-balance the camera carefully, ensuring all axes are free-moving when unlocked. Perform an auto-calibration after balancing. Double-click the dial button to wake the gimbal from sleep mode.
• Gimbal not powering on: Ensure the battery is fully charged and properly inserted. Check if the protective seal on the battery has been removed.
• Camera not responding to gimbal controls: Verify that the camera control cable is correctly connected between the camera and the gimbal. Check camera compatibility and ensure the latest firmware is installed on both the gimbal and the camera.
• App connectivity issues: Ensure Bluetooth is enabled on your smartphone and the MOZA Master App is up to date. Restart both the gimbal and your smartphone.

If issues persist, contact MOZA customer support or refer to the official MOZA support resources online.

Specifications

Figure 8: Visual representation of the MOZA AirCross 2's payload capacity and lightweight design.

Warranty and Support

1. Warranty Information

MOZA products typically come with a limited warranty covering manufacturing defects. Please refer to the warranty card included with your product or visit the official MOZA website for detailed warranty terms and conditions specific to your region.

2. Customer Support

For technical assistance, troubleshooting, or service inquiries, please contact MOZA customer support. You can often find support resources, FAQs, and contact details on the official MOZA website. For direct inquiries, you may reach out to jane@mokarzone.com, as indicated in product specifications.

Official MOZA Website: www.gudsen.com (Gudsen is the manufacturer of MOZA products).