TFA Dostmann 35.1155.01 Wireless Weather Station User Manual

1. Introduction

Thank you for choosing the TFA Dostmann 35.1155.01 Wireless Weather Station. This device provides comprehensive weather and time information for your home and garden. It features indoor and outdoor temperature, indoor humidity, a weather forecast with symbols, moon phase display, sunrise and sunset times, and a radio-controlled clock with an alarm function.

This manual will guide you through the setup, operation, and maintenance of your new weather station to ensure optimal performance and longevity.

Figure 1: The main display unit of the TFA Dostmann 35.1155.01 Wireless Weather Station, showing various weather parameters and time.

2. Setup

2.1 Unpacking and Components

Carefully unpack all components and ensure the following items are present:

• Main Weather Station Display Unit
• Wireless Outdoor Sensor
• User Manual

2.2 Battery Installation

The weather station and outdoor sensor require batteries (not included). We recommend using alkaline batteries for optimal performance.

1. Outdoor Sensor: Open the battery compartment on the back of the wireless outdoor sensor. Insert the required batteries, observing the correct polarity (+/-). Close the compartment securely.
2. Main Display Unit: Open the battery compartment on the back of the main display unit. Insert the required batteries, observing the correct polarity (+/-). Close the compartment securely.

Figure 2: The wireless outdoor sensor, which transmits temperature data to the main unit.

2.3 Sensor Placement

For accurate outdoor temperature readings, place the wireless sensor in a shaded, dry location, protected from direct sunlight and precipitation. Ensure it is within the 60-meter wireless range of the main display unit.

2.4 Initial Synchronization

After inserting batteries into both units, the main display unit will automatically search for the outdoor sensor signal. This process may take a few minutes. Once connected, the outdoor temperature will appear on the display.

2.5 Time and Location Settings

The weather station features a radio-controlled clock for precise timekeeping. It will automatically set the time and date. For accurate sunrise, sunset, and moon phase calculations, you may need to manually set your geographical location. Refer to the detailed instructions in the full manual for specific steps on setting your location from the 150 pre-programmed European cities.

3. Operating the Weather Station

3.1 Display Overview

The main display unit provides a wealth of information at a glance. Key areas include:

• Outdoor Temperature (OUT): Current temperature from the wireless sensor.
• Indoor Temperature & Humidity (IN): Current temperature and relative humidity inside.
• Weather Forecast: Symbols indicating predicted weather conditions (e.g., sunny, cloudy, rainy).
• Air Pressure History: Graphical representation of air pressure trends over the last 12 hours.
• Time & Date: Radio-controlled time, date, and weekday.
• Moon Phase: Current phase of the moon.
• Sunrise/Sunset: Times for local sunrise and sunset.
• Indoor Climate Indicator: A 'smiley' icon indicating comfort level based on indoor temperature and humidity.

Figure 3: An annotated diagram illustrating the various display segments and their corresponding functions on the weather station.

3.2 Key Functions

• Maximum and Minimum Values: The station records and allows you to view the highest and lowest temperatures and humidity levels.
• Temperature Trend: Arrows indicate whether outdoor temperature is rising, falling, or stable.
• Air Pressure Trend: Indicates changes in atmospheric pressure, contributing to the weather forecast.
• Alarm Clock: Set up to two independent alarm times with a snooze function.
• Backlight: Activate the blue backlight for easy viewing in low-light conditions.

3.3 Connecting Additional Sensors

The weather station supports up to two additional wireless outdoor sensors (sold separately, Cat. No. 30.3242.02). This allows you to monitor temperatures in different areas, such as a child's room or basement.

Figure 4: The weather station main unit displayed alongside its external sensor, highlighting key features such as multi-sensor support and detailed climate monitoring.

4. Maintenance

4.1 Battery Replacement

When the battery indicator appears on the display, replace the batteries in the respective unit (main station or sensor). Always replace all batteries in a unit at the same time with new, high-quality alkaline batteries. Do not mix old and new batteries or different battery types.

4.2 Cleaning

Clean the weather station and sensor with a soft, damp cloth. Do not use abrasive cleaners or solvents, as these may damage the display or casing. Avoid exposing the units to excessive dust or dirt.

5. Troubleshooting

• No Outdoor Temperature Display: Ensure the outdoor sensor is within range and has fresh batteries. Press the reset button on both units if necessary to re-establish connection.
• Incorrect Readings: Verify that the sensor is placed in a suitable location, away from direct heat sources or extreme cold.
• Radio Clock Not Synchronizing: Ensure the main unit is placed away from electronic interference and near a window for better signal reception. Manual time setting is available if automatic synchronization fails.
• Display Issues: Check battery levels. If the display is faint or incomplete, replace batteries.

6. Specifications

Figure 5: A visual representation of the main unit's dimensions: 15.8 cm width and 12.3 cm height.

7. Warranty and Support

TFA Dostmann provides a 1-year availability for spare parts for this product. For technical support, warranty claims, or further assistance, please refer to the contact information provided in the packaging or visit the official TFA Dostmann website.