Weeylite RB08P RGB LED Video Light Instruction Manual

1. Introduction

Thank you for purchasing the Weeylite RB08P RGB LED Video Light. This portable and versatile lighting solution is designed for various photography and videography needs, offering adjustable color temperature, full RGB color, and multiple special effects. Please read this manual carefully before use to ensure proper operation and to maximize the product's lifespan.

2. Safety Information

• Do not disassemble or modify the product. Unauthorized modifications may cause damage or injury.
• Keep the device away from water and other liquids. This product is not waterproof.
• Avoid direct eye exposure to the light source, as it can cause temporary vision impairment.
• Do not operate the device in environments with high temperatures, humidity, or flammable gases.
• Use only the provided charging cable or a certified Type-C cable for charging.
• Store the device in a cool, dry place when not in use.

3. Package Contents

Verify that all items listed below are included in your package:

• 1 x Weeylite RB08P RGB LED Video Light Panel
• 1 x Mini Desk Tripod
• 1 x 180° Rotated Phone Holder
• 1 x 1/4 Screw Hot Shoe Adapter
• 1 x USB Charging Cable
• 1 x Extendable Table Light Stand

Image: Contents of the Weeylite RB08P package, including the light panel, mini tripod, phone holder, hot shoe adapter, USB cable, and extendable stand.

4. Product Overview

Familiarize yourself with the components and controls of your Weeylite RB08P LED Video Light:

Image: Detailed diagram of the Weeylite RB08P showing the LED display, Type-C charging port, 52 LED beads, 1/4 screw thread, On/Off button, Mode Key, Adjustment buttons (+/-), and Setting Key.

• LED Display: Shows current settings such as mode, brightness, color temperature, and battery level.
• Type-C Charging Port: For charging the built-in battery.
• LED Beads: Composed of Bi-Color (warm/white) and RGB LEDs for versatile lighting.
• 1/4 Screw Thread: For mounting the light onto tripods, stands, or other accessories.
• On/Off Button: Powers the device on or off.
• Mode Key (M): Cycles through different operating modes (CCT, HSI, Scene Effects).
• Adjustment Buttons (+/-): Increases or decreases parameter values (e.g., brightness, color temperature, hue).
• Setting Key (SET): Confirms selections or navigates through sub-settings within a mode.
• Cold Shoe Notch: Located on top, designed for mounting microphones or other accessories.

5. Setup

5.1 Initial Charging

Before first use, fully charge the Weeylite RB08P using the provided USB Type-C cable and a compatible USB power adapter (not included). The LED display will indicate charging status.

5.2 Mounting Options

The RB08P offers multiple mounting configurations:

• Mini Desk Tripod: Attach the light directly to the mini tripod via the 1/4 screw thread for tabletop use.
• Extendable Stand: Assemble the extendable stand by screwing the light onto the top 1/4 screw. Adjust height as needed.
• Camera/Camcorder: Use the 1/4 screw hot shoe adapter to mount the light onto a camera's hot shoe.
• Phone Holder: Attach the phone holder to the mini tripod or extendable stand, then mount the light to the phone holder's cold shoe or 1/4 screw.

Image: Visual guide demonstrating various mounting options for the Weeylite RB08P, including attachment to a mini tripod, an extendable stand, and a phone holder setup.

6. Operating Instructions

6.1 Power On/Off

Press and hold the On/Off Button for approximately 2 seconds to power the light on or off.

6.2 Mode Selection

Press the Mode Key (M) to cycle through the available lighting modes:

• CCT Mode (Color Temperature Mode): Adjusts white light from warm to cool.
• HSI Mode (Hue, Saturation, Intensity Mode): Provides full RGB color control.
• Scene Effects Mode: Offers various pre-programmed lighting effects.

6.3 CCT Mode Operation

In CCT Mode, you can adjust color temperature and brightness:

1. Press the SET Key to switch between adjusting color temperature (2500K-8500K) and brightness (0-100%).
2. Use the Adjustment Buttons (+/-) to change the selected parameter.

Image: Display showing CCT mode with adjustable color temperature from 2500K (warm) to 8500K (cool) and brightness from 0% to 100%.

6.4 HSI Mode Operation

In HSI Mode, you can control hue, saturation, and intensity (brightness) for full RGB colors:

1. Press the SET Key to cycle through adjusting Hue (0-360°), Saturation (0-100L), and Brightness (0-100%).
2. Use the Adjustment Buttons (+/-) to change the selected parameter.

Image: Display showing HSI mode with controls for 0-360° full color hue and 0-100L color saturation, illustrating various RGB color outputs.

6.5 Scene Effects Mode

The RB08P includes 20 pre-programmed lighting effects to simulate various scenarios:

1. In Scene Effects Mode, use the Adjustment Buttons (+/-) to cycle through the different effects.
2. Press the SET Key to adjust the brightness or speed of the selected effect, then use Adjustment Buttons (+/-).

Image: Display showing various built-in lighting scene effects available, such as Bar, Fluorescent Lamp, Noon Light, Stream Light, Lightning, Shadow Lamp, Fairy Tale, Grasslands, Warning Light, Cloudy Lamp, Birthday, Flash Light, Aurora, Movies, Daylight Lamp, and Sea Wave.

6.6 Charging the Device

Connect the provided USB Type-C cable to the charging port on the light and to a USB power source. The battery icon on the OLED display will animate to indicate charging. The device can be used while charging.

7. Maintenance

• Cleaning: Use a soft, dry cloth to clean the light panel and body. Do not use abrasive cleaners or solvents.
• Storage: When not in use for extended periods, store the light in a protective case or bag in a cool, dry environment.
• Battery Care: To maintain battery health, avoid fully discharging the battery frequently. Charge the device regularly, even if not in use.

8. Troubleshooting

9. Specifications

10. Warranty and Support

Weeylite products are manufactured to high-quality standards. For warranty information, please refer to the warranty card included with your product or visit the official Weeylite website. For technical support or service inquiries, please contact Weeylite customer service through their official channels or the retailer where the product was purchased.

For more information, visit the Weeylite Store on Amazon.