1. Introduction
This manual provides essential information for the safe installation, operation, and maintenance of your Globe Electric Wi-Fi Smart 4-inch Ultra Slim Multicolor Changing RGB Tunable White Recessed Lighting Kit, Model 50068. This smart lighting solution offers convenient control via the Globe Suite app, voice commands, and customizable lighting options without the need for a separate hub.
Key Features:
- Control from anywhere using the free Globe Suite app.
- No hub required for setup.
- Voice control compatibility with Google Assistant, Amazon Alexa, and Siri.
- Millions of color options (RGB) and tunable white light (2000K-5000K).
- Create custom scenes and schedules.
- Ultra-slim design for easy installation.
2. Safety Information
Please read all safety instructions before installing or using this product. Failure to follow these instructions may result in electric shock, fire, or other hazards.
- WARNING: Risk of electric shock. Disconnect power at the circuit breaker before installation or servicing.
- This product must be installed in accordance with the applicable installation code by a person familiar with the construction and operation of the product and the hazards involved.
- Ensure all electrical connections are secure and comply with local codes and ordinances.
- Do not use with external dimmer switches. This smart light is dimmable via the app or voice control. Using an external dimmer may cause flickering or damage.
- Suitable for indoor and outdoor use (water-resistant).
- Operating temperature: -20°C to 40°C (-4°F to 104°F).
3. Package Contents
Verify that all components are present before beginning installation:
- Globe Electric Wi-Fi Smart Recessed Light Fixture
- Junction Box
- Instruction Manual
- Wiring Cable (integrated)
4. Setup and Installation
4.1 Physical Installation
- Turn off Power: Before starting, ensure the power to the installation area is turned off at the circuit breaker.
- Prepare Opening: Cut a 4-inch (10.16 cm) diameter hole in the ceiling at the desired location. Ensure there are no obstructions (joists, pipes, wires) in the ceiling space.
- Connect Wiring: Open the junction box cover. Connect the household electrical wires to the corresponding wires in the junction box using appropriate wire connectors (typically black to black, white to white, and ground to ground). Ensure all connections are secure.
- Secure Junction Box: Place the junction box into the ceiling opening.
- Install Light Fixture: Connect the light fixture cable to the junction box. Push the spring clips on the side of the light fixture upwards and insert the fixture into the ceiling opening. Release the clips to secure the fixture in place.
- Restore Power: Turn the power back on at the circuit breaker.
Image: Dimensions of the 4-inch ultra-slim recessed light fixture.
4.2 App Download and Pairing
The Globe Electric Smart Recessed Light requires the Globe Suite app for smart functionality. No separate hub is needed.
- Download the Globe Suite App: Search for "Globe Suite" in the Apple App Store (for iOS devices) or Google Play Store (for Android devices) and download the free app.
- Create an Account: Open the app and follow the on-screen instructions to create a new account or log in if you already have one.
- Connect to 2.4GHz Wi-Fi: Ensure your smartphone is connected to a 2.4GHz Wi-Fi network. The smart light only supports 2.4GHz Wi-Fi. If you have a dual-band router, you may need to temporarily disable the 5GHz band during pairing or ensure your phone is connected to the 2.4GHz SSID.
- Initiate Pairing: In the Globe Suite app, tap the "+" icon to add a new device. Select "Lighting" and then "Recessed Light".
- Power Cycle Light: Turn the light switch ON-OFF-ON-OFF-ON. The light should begin to flash rapidly, indicating it is in pairing mode. If it does not flash, repeat the power cycle.
- Complete Pairing: Follow the remaining instructions in the Globe Suite app to connect the light to your Wi-Fi network. Once connected, the light will stop flashing and appear in your app.
Image: Download the Globe Suite app from the App Store or Google Play.
5. Operating Instructions
5.1 Using the Globe Suite App
The Globe Suite app provides full control over your smart recessed light:
- On/Off: Tap the light icon to turn it on or off.
- Brightness: Adjust the brightness slider to your desired level.
- Color Selection: Choose from millions of RGB colors using the color wheel.
- Tunable White: Adjust the white light temperature from warm (2000K) to cool (5000K).
- Scenes: Select pre-set scenes (e.g., Party, Relax, Read) or create your own custom scenes.
- Schedules/Routines: Set timers, wake-up routines, bedtime routines, or vacation schedules for automated lighting control.
Image: Globe Suite app interface showing scene selection and scheduling options.
5.2 Voice Control
Integrate your Globe Electric smart light with voice assistants for hands-free control:
- Amazon Alexa: Enable the Globe Suite skill in the Alexa app. Then, say commands like, "Alexa, turn on the living room light," or "Alexa, set the kitchen light to blue."
- Google Assistant: Link your Globe Suite account in the Google Home app. Use commands such as, "Hey Google, dim the bedroom light to 50%," or "Hey Google, change the office light to warm white."
- Siri: Create custom Siri Shortcuts within the Globe Suite app for specific actions.
Image: Control your smart recessed lights with voice commands.
6. Maintenance
Your Globe Electric Smart Recessed Light requires minimal maintenance.
- Cleaning: Ensure power is off before cleaning. Wipe the fixture with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- Firmware Updates: Periodically check the Globe Suite app for available firmware updates for your device to ensure optimal performance and security.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on. | No power, loose wiring, faulty fixture. | Check circuit breaker. Verify wiring connections. If problem persists, contact customer support. |
| Light flickers or does not respond to app/voice control. | Using an external dimmer switch. | Remove any external dimmer switches. This smart light is designed for direct power and app/voice dimming. |
| Cannot connect to Wi-Fi or frequently loses connection. | Incorrect Wi-Fi band (5GHz), weak Wi-Fi signal, incorrect pairing procedure. | Ensure your router is broadcasting a 2.4GHz Wi-Fi network and your phone is connected to it during pairing. Move the light closer to the router or consider a Wi-Fi extender. Repeat the power cycle and pairing steps carefully. |
| Multiple lights not syncing or difficult to pair. | Individual pairing attempts, Wi-Fi interference. | When installing multiple lights on the same circuit, try to power cycle and initiate pairing for all of them simultaneously. Ensure a strong 2.4GHz Wi-Fi signal. |
| Light randomly changes settings or turns on/off. | Interference, app settings, or schedule conflicts. | Check for conflicting schedules or scenes in the Globe Suite app. Ensure no other smart home routines are interfering. Reset the light and re-pair if necessary. |
8. Specifications
| Feature | Detail |
|---|---|
| Model Number | 50068 |
| Product Dimensions | 12.4L x 12.4W x 1.3H centimetres (4.88L x 4.88W x 0.51H inches) |
| Item Weight | 381 g |
| Wattage | 9 watts |
| Brightness | 540 lumens |
| Color Temperature | 2000K - 5000K (Tunable White) + RGB Multicolor |
| Voltage | 120 volts |
| Connectivity Protocol | Wi-Fi (2.4GHz only) |
| Control Method | Voice (Alexa, Google Assistant, Siri), App (Globe Suite) |
| Light Source | Integrated LED |
| Material | Plastic |
| Installation Type | Flush Mount, Recessed |
| Indoor/Outdoor Usage | Indoor, Outdoor (Water Resistant) |
| Manufacturer | Globe Electric |
| Date First Available | October 17, 2019 |
9. Warranty
This Globe Electric product is covered by a 2-year manufacturer's limited warranty. For warranty claims or detailed information, please contact Globe Electric customer support.
10. Support
For technical assistance, troubleshooting, or customer service inquiries, please contact Globe Electric:
- Manufacturer Address: Pointe-Claire, QC H9R 1A8, CA
- Refer to the Globe Electric website or the Globe Suite app for the most up-to-date contact information and support resources.
