1. Product Overview
This manual provides instructions for the Accutime Pokemon Pikachu Analog Quartz Watch, model POK9056AZ. This watch features an analog display with a Pikachu dial, a durable silver metal case, and a black silicone strap with yellow accents. It is designed for everyday wear and includes basic water resistance.
Image 1.1: The Accutime Pokemon Pikachu Analog Quartz Watch, presented with its collectible tin.
Image 1.2: Watch face highlighting key design features.
2. Setup and Initial Use
2.1 Unboxing
The watch comes packaged in a collectible Pokemon tin. Carefully open the tin and remove the watch. Inspect the watch for any visible damage before use.
Image 2.1: Watch inside its collectible Pokemon tin.
2.2 Battery
The watch is powered by a single product-specific battery, which is included and pre-installed. The watch should be running upon removal from the packaging.
3. Operating Instructions
3.1 Setting the Time
- Locate the crown (small knob) on the right side of the watch case.
- Gently pull the crown outwards until you feel a click. The watch hands will stop moving.
- Rotate the crown clockwise or counter-clockwise to adjust the hour and minute hands to the correct time.
- Once the time is set, push the crown back into its original position. The watch hands will resume movement.
Image 3.1: Close-up of the watch face and crown for time setting.
3.2 Adjusting the Strap
The black silicone strap features a metal buckle clasp for a secure and adjustable fit. Thread the strap through the buckle and select the appropriate hole for a comfortable fit on the wrist. Ensure the watch is snug but not too tight.
Image 3.2: Watch worn on a wrist, demonstrating fit.
Image 3.3: Watch strap with buckle and adjustment holes.
4. Maintenance
4.1 Cleaning
To clean the watch, wipe the case and strap with a soft, damp cloth. Avoid using harsh chemicals or abrasive materials, as these can damage the watch's finish.
4.2 Water Resistance
This watch has a water resistance depth of 100 feet (approximately 30 meters). This rating means the watch is suitable for splashes, rain, and brief immersion in water. It is not recommended for swimming, showering, or diving, as prolonged exposure to water pressure or hot water can compromise the seals.
4.3 Battery Replacement
When the watch stops running or the time becomes consistently inaccurate, the battery may need replacement. Battery replacement should ideally be performed by a qualified watch technician to ensure proper sealing and maintain water resistance.
5. Troubleshooting
- Watch not running: Ensure the crown is fully pushed in. If it is, the battery may need replacement.
- Time is inaccurate: Check if the crown is fully pushed in. If the time continues to be inaccurate, the battery may be low, or the watch may require servicing.
6. Specifications
Video 6.1: A 360-degree view of the Accutime Pokemon Pikachu Analog Quartz Watch, showcasing its design from all angles.
| Feature | Detail |
|---|---|
| Model Number | POK9056AZ |
| Display Type | Analog |
| Watch Movement Type | Quartz |
| Water Resistance Depth | 100 Feet (30 Meters) |
| Case Material Type | Alloy |
| Case Diameter | 36 Millimeters |
| Case Thickness | 11.5 Millimeters |
| Band Material Type | Rubber (Silicone) |
| Band Width | 21 Millimeters |
| Band Length | 9.5 Inches |
| Crystal Material | Glass |
| Power Source | Battery Powered (1 Product Specific battery included) |
| Manufacturer | Accutime Watch Corp. |
Image 6.2: Side view of the watch.
Image 6.3: Back view of the watch, displaying model and battery information.
7. Warranty and Support
This product is covered by a manufacturer's warranty. For specific warranty details or support inquiries, please refer to the documentation included with your purchase or contact Accutime Watch Corp. directly.