1. Introduction
Thank you for choosing the RCA H070 Active Noise Cancelling Headphones. This manual provides essential information for setting up, operating, and maintaining your headphones. Please read it thoroughly before use to ensure optimal performance and longevity.
What's in the Box
- RCA H070 Active Noise Cancelling Headphones
- Hard Protective Case
- User Manual
- 3.5mm Audio Cable
- USB Charging Cable
2. Product Overview
The RCA H070 headphones feature a comfortable over-ear design with soft protein earpads and an adjustable headband. Key controls and ports are located on the earcups for easy access.
Figure 1: RCA H070 Active Noise Cancelling Headphones
Controls and Ports
Refer to the diagram below for the location of buttons and ports:
- Power Button / Multi-Function Button (MFB): Controls power on/off, play/pause, answer/end calls, and Bluetooth pairing.
- Volume Up (+) / Next Track: Increases volume with a short press, skips to the next track with a long press.
- Volume Down (-) / Previous Track: Decreases volume with a short press, goes to the previous track with a long press.
- ANC (Active Noise Cancelling) Button: Toggles Active Noise Cancelling function on/off.
- 3.5mm Audio Port: For wired connection using the included audio cable.
- Micro USB Port: For charging the headphones.
- LED Indicator: Displays power, pairing, and charging status.
- Microphone: Built-in for calls.
3. Setup
3.1 Charging the Headphones
- Plug the small end of the USB cable into the Micro USB port on the left earcup.
- Plug the other end into a USB wall charger or computer (DC 5V).
- The LED indicator will be red during charging and turn blue when the headphones are fully charged.
- Fully charge the headphones before using them for the first time.
3.2 Bluetooth Pairing
- Ensure the headphones are powered off.
- Press and hold the Power/MFB button for approximately 5 seconds until the LED indicator flashes red and blue alternately. This indicates pairing mode.
- On your device (smartphone, tablet, etc.), enable Bluetooth and search for available devices.
- Select "RCA H070" from the list of found devices.
- Once paired, the LED indicator will flash blue every 5 seconds.
4. Operating the Headphones
4.1 Power On/Off
- Power On: Press and hold the Power/MFB button for 3 seconds. The LED indicator flashes blue 3 times.
- Power Off: Press and hold the Power/MFB button for 3 seconds. The LED indicator flashes red twice.
4.2 Volume and Track Control
- Volume Up: Short press the '+' button.
- Volume Down: Short press the '-' button.
- Next Track: Long press the '+' button.
- Previous Track: Long press the '-' button.
4.3 Active Noise Cancelling (ANC)
The ANC feature reduces ambient noise, providing a more immersive listening experience.
- Activate ANC: Slide the ANC switch to the 'ON' position.
- Deactivate ANC: Slide the ANC switch to the 'OFF' position.
4.4 Call Management
The built-in microphone allows for hands-free calling when connected via Bluetooth.
- Answer/End Call: Short press the Power/MFB button.
- Reject Call: Long press the Power/MFB button.
4.5 Wired Mode
To use the headphones with non-Bluetooth devices or when the battery is depleted, connect the 3.5mm audio cable to the audio port on the headphones and your device.
5. Maintenance
5.1 Cleaning
- Wipe the headphones with a soft, dry cloth.
- Do not use abrasive cleaners, alcohol, or chemical solvents.
- Keep the ports free of dust and debris.
5.2 Storage
- Store the headphones in the provided hard protective case when not in use to prevent damage.
- Avoid storing in extreme temperatures or high humidity.
6. Troubleshooting
| Problem | Solution |
|---|---|
| Headphones do not power on. | Ensure the headphones are fully charged. Press and hold the Power/MFB button for 3 seconds. |
| Cannot pair with Bluetooth device. | Ensure headphones are in pairing mode (LED flashes red/blue). Turn off and on Bluetooth on your device. Move headphones closer to the device. |
| No sound. | Check volume levels on both headphones and connected device. Ensure headphones are properly paired or the audio cable is securely connected. |
| ANC not working effectively. | Ensure the ANC switch is in the 'ON' position. ANC is most effective against low-frequency, constant noise. |
7. Specifications
| Feature | Detail |
|---|---|
| Model Name | H070 |
| Brand | RCA |
| Connectivity Technology | Wireless (Bluetooth), Wired (3.5mm) |
| Wireless Communication Technology | Bluetooth 5.0 |
| Noise Control | Active Noise Cancellation |
| Battery Life | Up to 30 Hours |
| Earpiece Shape | Over Ear |
| Material | Plastic (with Soft Protein Earpads) |
| Item Weight | 1.1 pounds |
| Compatible Devices | Smartphones, Tablets, Laptops, Smart TVs (Bluetooth-enabled) |
8. Warranty and Support
RCA products are designed for reliability and performance. For specific warranty details and terms, please refer to the warranty card included with your product or visit the official RCA website.
For technical support, troubleshooting assistance, or to inquire about replacement parts, please contact RCA customer service through their official channels. Contact information can typically be found on the product packaging or the RCA brand website.
