GODOX FV150 High Speed Sync Flash LED Light

1. Introduction

The GODOX FV150 is a versatile hybrid lighting unit designed for both continuous LED lighting and high-speed sync flash photography. It combines the functionality of a traditional LED light with advanced flash capabilities, offering strong power, abundant features, and various special effects modes for creative shooting scenarios.

2. Product Features

• Hybrid Functionality: Operates as both a continuous LED light and a high-speed sync flash.
• High Power Output: 150W LED light with flash brightness four times that of the LED light, enhancing freezing capability for instantaneous action.
• High-Speed Sync: Supports 1/8000s high-speed sync function.
• Continuous Shooting: Over 10 continuous flashes per second at full power and 8 continuous flashes per second in HSS mode.
• Color Temperature: Stable 5600K color temperature.
• High Color Accuracy: CRI 96+ for accurate color rendering.
• Built-in Wireless Receiver: Integrated Godox 2.4G wireless receiver (X system) compatible with Canon, Nikon, Sony, Fujifilm, Panasonic, Olympus, and Pentax camera systems.
• Extensive Control: Supports 16 groups and 32 channels for individual unit control.
• Special Effects Modes: Features 8 FX special effects modes to simulate various shooting scenes.
• Dimmable LED: Precise 0% to 100% brightness dimming in LED continuous modes.
• Flash Power Adjustment: 1/8 to 1/1 or 7.0 to 10.0 power levels in flash modes, displayed as fractions or decimals.
• Bowens Mount: Compatible with a wide range of Bowens mount light modifiers.
• Clear LCD Display: Large and clear LCD information panel for easy settings adjustment.
• Efficient Heat Dissipation: Designed for continuous and rapid use without overheating.

3. Included Components

Verify that all the following items are included in your package:

• 1x GODOX FV150 Light Unit
• 1x Power Cord
• 1x Remote Control
• 1x Standard Reflector
• 1x Lamp Cover
• 1x Pergear Cleaning Kit

Image: GODOX FV150 Light Unit with Standard Reflector attached.

4. Setup

1. Mounting the Light: Attach the FV150 unit to a light stand using its U-type bracket. Secure it by tightening the adjustment knob on the bracket.
2. Connecting Power: Insert the power cord into the AC input port on the back of the unit and plug the other end into a suitable power outlet (AC100-240V, 50/60Hz).
3. Attaching Modifiers: The FV150 features a Bowens mount. Align your desired light modifier (e.g., standard reflector, softbox, beauty dish) with the mount and twist until it locks securely.
4. Lamp Cover: Ensure the lamp cover is removed before operation to prevent heat buildup.

Image: GODOX FV150 unit mounted on a light stand, showing the U-type bracket.

Image: GODOX FV150 with the standard reflector attached to the Bowens mount.

5. Operating Instructions

5.1 Power On/Off

Locate the ON/OFF switch on the back panel of the unit. Flip the switch to 'ON' to power on the light and to 'OFF' to power it down.

5.2 Mode Selection (LED / Flash)

Press the LED button on the left side of the control panel to switch between continuous LED mode and Flash mode. The current mode will be displayed on the LCD screen.

5.3 Adjusting Brightness / Power

• In LED Mode: Rotate the DIM knob (SET dial) on the right side of the control panel to adjust the brightness from 0% to 100%.
• In Flash Mode: Rotate the DIM knob (SET dial) to adjust the flash power output. Options include fractional settings (1/8 to 1/1) or decimal settings (7.0 to 10.0).

Image: Close-up of the GODOX FV150 LCD display showing power settings and control buttons.

5.4 Wireless Control

The FV150 has a built-in Godox 2.4G wireless receiver. To use wireless control:

1. Press the GR/CH button to select the desired group (A-F, 0-9).
2. Long press the GR/CH button to enter channel selection mode, then rotate the SET dial to select a channel (1-32).
3. Ensure your Godox 2.4G wireless trigger (e.g., XPro, X2T) is set to the same group and channel as the FV150.

Image: Diagram showing the GODOX FV150 with compatible wireless triggers (XPro, X2T) for remote control.

5.5 Special Effects (FX Modes)

In LED mode, press the FX button on the left side of the control panel to cycle through 8 special effects modes. Rotate the DIM knob to select the desired effect (e.g., Flash1, Storm1, TV, Bad Bulb).

Image: GODOX FV150 control panel displaying the 8 FX special effects modes.

5.6 Flash Sync and Anti-Preflash Function

• S1 Mode: The flash will trigger synchronously when it receives an external flash.
• S2 Mode (Anti-Preflash): The flash is triggered synchronously when it receives the second flash, ignoring the pre-flash from another unit.

6. Maintenance

• Keep the device dry. Do not handle with wet hands.
• Clean the equipment regularly with a soft, dry cloth. Avoid using solvents or harsh cleaning agents.
• Store the unit in a cool, dry place away from direct sunlight and extreme temperatures.
• Protect the LED light source from impact.

7. Troubleshooting

• Light not powering on: Check if the power cord is securely connected and the ON/OFF switch is in the 'ON' position. Verify the power outlet is functional.
• Flash not firing: Ensure the unit is in Flash mode. Check the wireless trigger settings (group, channel, ID off) and battery. Press the 'TEST' button on the unit to confirm internal flash function.
• Inconsistent brightness: Verify power settings in both LED and Flash modes. Ensure no external factors are interfering with light output.
• Overheating: If the unit feels excessively hot, power it off and allow it to cool down. Ensure proper ventilation around the unit.

8. Specifications

9. Warranty and Support

For warranty information and technical support, please refer to the documentation provided with your product or visit the official GODOX website. Keep your purchase receipt as proof of purchase for any warranty claims.