Godox FV150/FV200 High Speed Sync Flash LED Light Instruction Manual

Foreword

Thank you for purchasing this Godox Product!

The Flash Video Light FV series adds flash functions to the traditional LED light. The FV series can serve as both a flash and an LED light. With strong power, abundant functions, and 8 special effects modes, it can achieve creative shooting easily.

Main Features:

• Can function as both a flash and an LED light.
• The light brightness of the flash is four times that of the LED light, increasing the ability to freeze instantaneous action.
• Supports 1/8000s high-speed sync function when used as a flash.
• Offers over 10 continuous flashes per second and 8 continuous flashes per second in high-speed sync mode at 1/2 power output.
• Built-in Godox 2.4G wireless X system, compatible with cameras of multiple brands.
• Provides a stable light source with 0% to 100% precise light adjustment when used as an LED light.
• Includes 8 FX special effects modes to simulate various shooting scenes.
• Features 16 groups and 32 channels for wireless control.
• Equipped with a U-type bracket for easy angle adjustment.
• Bowens-mount allows for the installation of various accessories.
• Clear LCD display.
• Excellent heat dissipation.

Warning

• ⚠️ Always keep this product dry. Do not use in rain or in damp conditions.
• ⚠️ Do not disassemble. Should repairs become necessary, this product must be sent to an authorized maintenance center.
• ⚠️ Keep out of reach of children.
• ⚠️ As this product does not have waterproof function, please take measures for waterproofing in rainy or damp environments.
• ⚠️ Do not use the flash unit in the presence of flammable gases, chemicals, and other similar materials. In certain circumstances, these materials may be sensitive to the strong light emitting from this flash unit, potentially resulting in fire or electromagnetic interference.
• ⚠️ As this product has a built-in lithium battery, do not disassemble, impact, squeeze, or put it into fire. If serious bulging occurs, please do not use. Do not use or store the product if the ambient temperature reads over 40°C. Please charge the product with a specialized charger and operate it correctly within the defined voltage and working temperature according to the instruction manual.

Body

Main Body

Diagram of the main body of the Godox FV series flash. It shows a handle, thermovents (1 and 2), accessory locking ring, Bowens mount, LED light, protect cover, U-type bracket, bracket screw, umbrella input, and air inlet.

Remote Control Diagram: The remote control (RC-A6) features buttons for Channel (CH), Group (GR), Color Temperature, Power/Light Brightness, TEST, MENU, and Power Switch. The LCD panel displays settings like Channel, Group, Battery Level, Brightness, and Color Temperature.

LCD Panel

Diagram illustrating the LCD panel of the flash unit. Key indicators include LED mode, flash mode (represented by ⚡), Group, Channel/ID, Special Effect, Modeling Lamp, Heat Protection Icon, Power/Light Brightness, and Color Temperature.

Included Items

• 1. Flash video light
• 2. RC-A6 Remote control
• 3. Power cord
• 4. Reflector for Bowens mount LED light
• 5. Lamp cover

Included Items Visual: Depicts the flash video light (FV200 model shown), RC-A6 Remote control, power cord, reflector for Bowens mount LED light, and lamp cover.

Separately Sold Accessories

The product can be used in combination with the following accessories sold separately to achieve best photography effects: XPro, X2 or XT32 remote control, Power Inverter, Softbox, Photographic Umbrella, Light Stand, Barndoor, Snoot, etc.

Operation

Power Connection

Use the power cord to connect the flash to an AC power source and turn on the power switch.

Flash Setting

The LED Button allows switching between LED mode (indicated by ?) and flash mode (indicated by ⚡). A short press of the button displays the current mode.

Power Adjustment

In flash mode, the flash power can be adjusted using the light brightness adjustment buttons from 1/16 to 1/1 (or 6.0 to 10.0). The power output is clearly displayed on the LCD Panel. "OFF" on the display indicates that the flash triggering function is turned off. Press the Test button to discharge power when the flash output is adjusted from high to low.

Light Brightness Adjustment

In LED mode, the light brightness can be adjusted by the light brightness adjustment button from 0% to 100%. The light brightness is clearly displayed on the LCD Panel.

Test Button

Press the test button to fire the flash without taking a picture. It can also help adjust the flash output and light brightness when combined with the light brightness adjustment button. Holding down the light brightness adjustment button and turning on the light displays the version on the LCD panel. This operation can also be used to restore factory settings.

Menu Button

Custom Function Setting

Press the Menu button to enter the custom setting area.

GR/CH Button

Short press the GR/CH button to adjust wireless groups. When the group icon on the LCD panel is blinking, use the light brightness adjustment button to set the groups. Long press the GR/CH button to adjust wireless channels. When the channel icon on the LCD panel is blinking, use the light brightness adjustment button to set the channels.

Modeling Lamp/Special Effect Button

Modeling lamp ON/OFF: In flash mode, press the modeling lamp/special effects button to turn on or off the modeling lamp. When the modeling lamp is on, use the same button to adjust its brightness from 5% to 100%.

Special Effects ON/OFF: In LED mode, press the modeling lamp/special effects button to turn special effects on or off. Use the same button to choose from the eight special modes.

Wireless Control

2.4G Wireless control (Flash Mode)

In flash mode, the FV series has 2.4G wireless receiving functions. Use Godox X series flash triggers (e.g., X1, X2, XPro series, and XT 32) to wirelessly control the FV series' power, modeling lamp's on/off, and triggering.

Sync Triggering

The sync cord jack is a 3.5mm plug. Insert a trigger plug here, and the flash will fire synchronously with the camera shutter.

Wireless Control in LED Mode

With the 2.4G wireless system, the FV series offers remote grouping and control. Up to 16 groups of LED lights can be controlled. 32 channels and 100 wireless IDs are available with strong anti-interference capability. Ensure the channels and groups of the LED light are set the same as those of the RC-A6 remote control before usage.

Adjusting Channel/Group with the Remote Control

• Press the CH/GR button; the group icon blinks. Press the "-" or "+" button to choose a group (A to F, 0 to 9).
• Press the CH/GR button twice; the channel icon blinks. Press the "-" or "+" button to choose a channel (1 to 32).

Adjusting ID with the Remote Control

• Double-click the CH/GR button and press the "-" or "+" button to choose an ID from OFF or 0 to 99.

Adjusting Light Brightness with the Remote Control

• Press the "-" or "+" button to adjust the light brightness.

Adjusting Color Temperature with the Remote Control

• Press the SET button of the remote control; the color temperature icon blinks. Press the "-" or "+" button to adjust the color temperature.

Remote control reset:

Press the "-" and "+" buttons simultaneously to reset the remote control.

Note: The wireless signal can be received only when the controller of the LED light is powered on.

Setting color temperature range

The factory setting for the remote control's color temperature range is 2500-10000K. To use the remote control conveniently, color temperature range settings are available: when the remote control is off, hold down the SET button and turn it on to enter the color temperature adjusting interface. Press the CH/GR button to switch between the lowest and highest color temperature values, and press "-" or "+" to change the value. Press the SET button to confirm.

LED Special Effects Mode

In LED mode, 8 FX special effects modes can be set to simulate various shooting scenes and achieve creative shooting.

Troubleshooting

The Reason & Solution of Not Triggering in Godox 2.4G Wireless

1. Disturbed by the 2.4G signal in the outer environment (e.g., wireless base station, 2.4G wifi router, Bluetooth, etc.)

   ➡️ Adjust the channel CH setting on the flash trigger (add 10+ channels) and use a channel that is not disturbed. Alternatively, turn off other 2.4G equipment in use.

2. Please make sure that the flash has finished its recycle or caught up with the continuous shooting speed (the flash ready indicator is lit) and the flash is not under overheat protection or other abnormal situations.

   ➡️ Downgrade the flash power output. If the flash is in TTL mode, try changing it to M mode (a preflash is needed in TTL mode).

3. Whether the distance between the flash trigger and the flash is too close or not.

   ➡️ Please turn on the "close distance wireless mode" on the flash trigger (within 0.5m): For X1, X2, and XPro series: press and hold the test button, then turn on the unit until the flash ready indicator blinks twice. For XPro series: Set C.Fn-DIST to 0-30m.

4. Whether the flash trigger and the receiver end equipment are in low battery states or not.

   ➡️ Please replace the battery (using 1.5V disposable alkaline batteries is recommended for the flash trigger).

Technical Data

Flash Video Light

Remote Control

FCC Warning

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

*RF warning:

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body.