Feit Electric T24/840/LEDG2/4 LED Linear Tube Light Bulb User Manual

1. Introduction

Thank you for choosing the Feit Electric T24/840/LEDG2/4 LED Linear Tube Light Bulb. This manual provides essential information for the safe and efficient use of your new LED light bulbs.

These 2-foot T8/T12 LED lamps are designed to convert existing fluorescent fixtures to energy-efficient LED technology with a simple plug-and-play installation. The 4100K Cool White light provides 850 lumens of brightness while consuming only 8 watts of power, offering significant energy savings compared to traditional 20-watt fluorescent lamps. Feit Electric LED bulbs are shatter-resistant, RoHS compliant, and 100% mercury-free, ensuring a long lifespan and environmental safety.

2. Product Features

• Plug and Play Installation: Designed for easy installation without the need for ballast replacement or rewiring of the fixture.
• Energy Efficient: Consumes only 8 watts to produce 850 lumens, equivalent to a 20-watt fluorescent lamp, resulting in up to 60% energy savings.
• Cool White Light: Provides 4100K cool white light, ideal for offices, workshops, bathrooms, and other areas requiring bright, crisp illumination.
• Long Lifespan: Rated for up to 50,000 hours or approximately 45.7 years of life, reducing replacement frequency and maintenance.
• Durable and Safe: Shatter-resistant, 100% mercury-free, RoHS compliant, and ETL certified for optimal performance and safety.
• Instant On: Provides full brightness immediately, even in sub-zero temperatures.

Image: Four Feit Electric T8/T12 LED linear tube light bulbs, showcasing the product's design.

Image: A detailed view of a single Feit Electric LED linear tube light bulb, highlighting its bi-pin base.

3. Safety Information

Please read and understand all safety instructions before installation and use.

• Risk of Electric Shock: Always turn off power to the fixture at the circuit breaker before inspection, installation, or removal.
• Risk of Fire: Do not install this lamp in pre-heat luminaires.
• Risk of Injury: Do not bend or apply pressure to the lamp tube.
• Use only in dry locations. Do not use where directly exposed to water.
• This lamp is not intended for use with emergency exits.
• Do not use with dimmers. This lamp is non-dimmable.
• Do not use with photocells, timers, or other control devices unless specifically designed for LED lamps.
• Ensure the fixture is properly grounded.
• Do not disassemble the lamp. There are no user-serviceable parts inside.

4. Setup and Installation

The Feit Electric T24/840/LEDG2/4 LED Linear Tube Light Bulb is designed for simple "plug and play" installation, meaning no ballast replacement or rewiring is required for most compatible fluorescent fixtures.

1. Turn Off Power: Before beginning installation, ensure the power to the fluorescent light fixture is completely turned off at the circuit breaker.
2. Remove Existing Fluorescent Tube: Carefully remove the existing fluorescent tube from the fixture. Allow it to cool if it has been recently in use.
3. Insert LED Tube: Align the pins of the Feit Electric LED tube with the sockets in the fixture. Gently push the tube into the sockets and twist to secure it in place. Ensure both ends are fully seated.
4. Restore Power: Once the LED tube is securely installed, restore power to the fixture at the circuit breaker.
5. Test: Turn on the light switch to confirm the LED tube is functioning correctly.

Important Note: This LED tube is designed to work with most electronic and magnetic ballasts. If the lamp does not light up after installation, ensure the ballast is compatible. Refer to the official Feit Electric website or contact customer support for a list of compatible ballasts if needed.

Image: The packaging for the Feit Electric 2ft LED Universal Plug & Play tube, indicating its compatibility and features.

5. Operation

Operating your Feit Electric LED Linear Tube Light Bulb is straightforward. Once installed in a compatible fixture and power is restored, simply use the existing light switch to turn the light on or off. The LED tube will provide instant full brightness.

Image: An example of a garage or workshop space illuminated by linear tube lights, demonstrating typical application.

6. Maintenance

The Feit Electric LED Linear Tube Light Bulb is designed to be virtually maintenance-free due to its long lifespan of up to 50,000 hours.

• Cleaning: If cleaning is necessary, ensure the power to the fixture is turned off at the circuit breaker. Use a soft, dry cloth to gently wipe the surface of the tube. Do not use liquid cleaners or abrasive materials.
• Replacement: Due to the extended lifespan, routine replacement is not typically required. Replace the bulb only when it reaches the end of its operational life.

7. Troubleshooting

If you encounter issues with your Feit Electric LED Linear Tube Light Bulb, refer to the following common troubleshooting steps:

If the problem persists after trying these steps, please contact Feit Electric customer support for further assistance.

8. Specifications

Image: Dimensional diagram of the LED tube, indicating its 24-inch length and 1-inch diameter.

9. Warranty and Support

Feit Electric provides a 5-year warranty for this product, ensuring quality and reliability.

For warranty claims, technical support, or further inquiries, please visit the official Feit Electric website or refer to the contact information provided with your purchase.

You can also find additional resources and product information on the Feit Electric Store on Amazon.

An official Installation Manual (PDF) is also available for download: Download PDF Manual.