Feit Electric OM200/850/LED

Feit Electric A21 LED Light Bulb OM200/850/LED Instruction Manual

Model: OM200/850/LED

1. Important Safety Information

  • Electrical Hazard: Always turn off power at the switch and circuit breaker before installing or removing the bulb.
  • Non-Dimmable: This bulb is not designed for use with dimmer switches. Using it with a dimmer may cause damage to the bulb or the dimmer.
  • Damp Location Rated: This bulb is suitable for use in damp locations. Do not expose to direct water spray.
  • Enclosed Fixtures: Avoid using this bulb in fully enclosed fixtures, as this can reduce its lifespan due to heat buildup.
  • Mercury-Free: This product is 100% mercury-free.

2. Product Overview

The Feit Electric A21 LED Light Bulb (Model OM200/850/LED) provides a high-output, energy-efficient lighting solution. It is designed to replace traditional 200-watt incandescent bulbs, offering 3050 lumens of 5000K Daylight colored light while consuming only 25 watts of power. This bulb features a standard E26 base and a long lifespan.

Feit Electric A21 LED Light Bulb

Image 2.1: Front view of the Feit Electric A21 LED Light Bulb, showcasing its classic shape and E26 base.

Feit Electric A21 LED Light Bulb Packaging

Image 2.2: Packaging for the Feit Electric A21 LED Light Bulb, highlighting its 200W equivalent, 3050 lumens, and 5000K Daylight features.

3. Setup and Installation

Follow these steps to safely install your Feit Electric A21 LED Light Bulb:

  1. Turn Off Power: Locate the light fixture's switch and turn it to the OFF position. For added safety, turn off the power at the circuit breaker controlling the fixture.
  2. Remove Old Bulb: Carefully unscrew the existing light bulb from the fixture. Allow it to cool if it has been recently in use.
  3. Install New Bulb: Gently screw the Feit Electric A21 LED Light Bulb into the standard E26 base socket until it is finger-tight. Do not overtighten.
  4. Restore Power: Turn the power back on at the circuit breaker, then use the light switch to activate the bulb.
Feit Electric A21 LED Light Bulb Dimensions

Image 3.1: Diagram showing the dimensions of the Feit Electric A21 LED Light Bulb: 2.7 inches wide and 5.2 inches high.

4. Operating Instructions

Operating the Feit Electric A21 LED Light Bulb is straightforward:

  • Power On/Off: Use the standard wall switch connected to your light fixture to turn the bulb on or off.
  • Instant Brightness: The bulb provides instant-on brightness without any warm-up time.
  • Non-Dimmable: As noted in the safety information, this bulb is non-dimmable. Do not attempt to use it with dimmer switches.

5. Maintenance

To ensure the longevity and optimal performance of your LED bulb, follow these simple maintenance guidelines:

  • Cleaning: Before cleaning, ensure the power to the fixture is turned off and the bulb has cooled. Wipe the bulb with a soft, dry cloth. Do not use liquid or abrasive cleaners, as they may damage the bulb's surface or internal components.
  • Replacement: With an average life of 25,000 hours, this bulb requires minimal replacement. When replacement is necessary, follow the installation steps in Section 3.

6. Troubleshooting

If you encounter issues with your Feit Electric A21 LED Light Bulb, refer to the following common troubleshooting steps:

  • Bulb Does Not Light:
    • Ensure the power switch and circuit breaker are in the ON position.
    • Verify the bulb is securely screwed into the socket.
    • Check if the fixture itself is working by testing with another known-good bulb.
  • Bulb Flickers:
    • Confirm that the bulb is not connected to a dimmer switch. This bulb is non-dimmable.
    • If flickering occurs when high-power devices (e.g., laser printers, gaming computers) are in use on the same electrical circuit, it may be due to electrical interference. Consider using the bulb on a different circuit or relocating the interfering device.

7. Specifications

FeatureDetail
BrandFeit Electric
Model NumberOM200/850/LED
Light TypeLED
Wattage25 Watts
Incandescent Equivalent200 Watts
Brightness3050 Lumens
Color Temperature5000K Daylight
Bulb Shape SizeA21
Bulb BaseE26 Medium
Voltage120 Volts
DimmableNo
Average Life25,000 Hours (approx. 22 years)
Indoor/Outdoor UsageIndoor (Damp Rated)
MaterialPlastic
Product Dimensions2.7" W x 5.2" H
CertificationsUL Listed, FCC Compliant, RoHS Compliant, Energy Star, CEC Certified
UPC017801157604

8. Warranty and Support

Feit Electric stands behind the quality of its products.

  • Warranty: This Feit Electric A21 LED Light Bulb is covered by a 3-year warranty from the date of purchase. Please retain your proof of purchase for warranty claims.
  • Customer Support: For technical assistance, warranty inquiries, or further information, please contact Feit Electric customer support. Visit the official Feit Electric website for contact details.

© 2025 Feit Electric. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.